You are here: Home > Shop Brands > Winland Electronics > WaterBug Alerts
We found 10 results matching your criteria.
Electronic water detection at it's best! For over 25 years Winland Electronics has manufactured environmental security products, providing "peace-of-mind" solutions to protect against unfavorable water leakage in residential or commercial property. These
Sort By:
Page of 1
Winland Electronics Inc. 1041 - Unsupervised WaterBug Under-Carpet Sensor Winland Electronics Inc. 1175 (BZ-1) - Remote Buzzer
Probe Size (under carpet P/N #1041): 2" x 3" x 0.18" (5.1 cm x 7.6 cm x 0.5 cm) Audible Alarm Module (Model BZ-1) P/N 1175
Voltage: 12VDC @ 8mA.
Winland Electronics Inc. M 001 0005 (WB-800) - 8 zone, 12or 24 VAC/VDC Winland Electronics Inc. M-001-0006 - Supervised WaterBug Surface Sensor
[PN# M-001-0005]

Eight zone water detection monitoring - Microprocessor controlled.


The model WB-800 operates on 12 or 24 Volt AC/DC and has a form C relay output that can be connected to alarm panels, bells, dialers, etc. Unit also includes internal alarm buzzer with silence switch and eight LEDs on console to identify the sensor in alarm. As many as eight supervised sensor probes can be run up to 500 feet away (or 16 non-supervised sensors). Each sensor probe has two contacts. When a film of water forms a bridge between these contacts, the unit senses this and triggers the alarm output. The sensor will not alarm due to condensation or high humidity. Four standard surface sensors are included with the unit.

 

Typical Applications:

  • Residential or Vacation Homes
  • Basement Sump Pumps
  • Commercial Buildings
  • Office and Computer Areas
  • Unattended Buildings
  • Greenhouses & Animal Buildings
  • All Drain Areas
  • Sprinkler Systems
Features:
  • Reliable microprocessor design
  • Versatile 12 or 24 Volt AC/DC power for operation
  • No false alarms due to condensation or humidity
  • Can monitor up to 8sensor probes - up to 500 feet away
  • Provides (1) form "C" contact closure output for alarm
  • Internal audible alarm with silence switch
  • Easy surface mount installation
  • One year parts and labor; subject to conditions of limited warranty.
Specifications:
  • Console Size: 6.55" x 4.70" x 1" (16.6 cm x 11.9 cm x 2.5 cm)
  • Probe Size (standard P/N #1040): 2" x 3" x 0.88" (5.1 cm x 7.6 cm x 2.2 cm)
  • Probe Size (under carpet P/N #1041): 2" x 3" x 0.18" (5.1 cm x 7.6 cm x 0.5 cm)
  • Power Requirements: 12V or 24V AC or DC
  • Current Draw (resting state): 75mA @ 12V or 24VDC, or 200mA @ 12V or 24VAC
  • Current Draw (alarm condition): 125mA @ 12V or 24VDC, or 330mA @ 12V or 24VAC
  • Sensitivity: Will not alarm due to high humidity or condensation
  • Operating Temperature: Control and Probe 32? to +140? F (0? to +60? C)
  • Outputs: Form C (SPDT) 1 Amp @ 24Vac, 1 Amp @ 30 VDC (not for direct high voltage switching) Audible alarm with silence feature
  • Recommended Dist. Between Probes & Console: 500ft (152.4 m) maximum
  • Recommended Max. Probes Per Console: 8 supervised or 16 non-supervised
Water
Minimize damage from water leaks with the WaterBug sensor. It is ideal for use with or around laundry rooms, basement sump pumps, all drain areas, computer rooms, document storage areas, warehouses, a/c condenser trays, etc.
Winland Electronics Inc. M-001-0009 - WaterBug Under-Carpet Sensor Winland Electronics Inc. M-001-0094 - Supervised WaterBug Surface Sensor
Water
Minimize damage from water leaks with the WaterBug sensor. It is ideal for use with or around laundry rooms, basement sump pumps, all drain areas, computer rooms, document storage areas, warehouses, a/c condenser trays, etc.
Supervised Sensor For Waterbug 800
REPLACES WI-M0010006
Winland Electronics Inc. WB200 - Waterbug - 12 or 24 VAC or VDC (WB-200) Winland Electronics Surface Sensor for WB-200/WB-350 (Part #M-001-0106)
[PN# 1043]

Electronic water detection at its best!


The model WB-200 operates on 12 or 24 Volt AC/DC and has a form C relay output that can be connected to alarm panels, bells, dialers, etc. The unit can monitor up to as many as six sensor probes, up to 100 feet away. Each sensor probe has two contacts. When a film of water forms a bridge between these contacts, the unit senses this and triggers the alarm output. The sensor will not alarm due to condensation or high humidity. One standard surface sensor is included with the unit.

 

Typical Applications:

  • Residential or Vacation Homes
  • Basement Sump Pumps
  • Commercial Buildings
  • Office and Computer Areas
  • Unattended Buildings
  • Greenhouses & Animal Buildings
  • All Drain Areas
  • Sprinkler Systems
Features:
  • Versatile 12 or 24 Volt AC/DC power for operation
  • No false alarms due to condensation or humidity
  • Can monitor up to 6 sensor probes - up to 100 feet away
  • Provides (1) form "C" contact closure output for alarm
  • Easy surface mount installation
  • One year parts and labor; subject to conditions of limited warranty.
Specifications:
  • Console Size: 5" x 2.44" x 1.25" (12.7 cm x 6.2 cm x 3.18 cm)
  • Probe Size (standard P/N #1040): 2" x 3" x 0.88" (5.1 cm x 7.6 cm x 2.2 cm)
  • Probe Size (under carpet P/N #1041): 2" x 3" x 0.18" (5.1 cm x 7.6 cm x
    0.5 cm)
  • Power Requirements (resting state): 12V or 24V AC or DC
  • Power Requirements (alarm condition): 5mA @ 12V or 24V AC, or 13.5mA @ 12V or 24V DC
  • Sensitivity: Will not alarm due to high humidity or condensation
  • Operating Temperature: Control and Probe 32? to +140? F (0? to +60? C)
  • Outputs: Form C (SPDT) 1 Amp @ 24Vac, 1 Amp @ 30 VDC (not for direct high voltage switching)
  • Recomended Dist. Between Probes & Console: 1-2 probes: 200ft (61 m) max. 3 or more probes: 100ft (30.5 m) per probe
  • Recommended Max. Probes Per Console: 6
Surface Sensor for WB-200/WB-350 (Part #M-001-0106)

Old Code: 1040, New Code M-001-0106 Additional surface sensor for the WaterBug 200 or WaterBug 350 models.

Winland WI-WB200 Water Bug

Winland WI-WB200 Water Bug


Our Price : $59.04

Water Bug
The model WB-200 operates on 12 or 24 Volt AC/DC and has a form C relay output that can be connected to alarm panels, bells, dialers, etc. Unit can monitor as many as six sensor probes, up to 100 feet away. Each sensor probe has two contacts. When a film of water forms a bridge between these contacts, the unit senses this and triggers the alarm output. The sensor will not alarm due to condensation or high humidity. One standard surface sensor is included with the unit.
Surface Sensor for WB-200/WB-350 (Part #M-001-0106)

Old Code: 1040, New Code M-001-0106 Additional surface sensor for the WaterBug 200 or WaterBug 350 models.

   
 
 
 

Enter your email for a chance to WIN $100 Amex Gift Card.

Please Enter Your Email Address

*One entry per household please