You are here: Home > Shop Brands > Commercial Products Group > Speakers
We found 4 results matching your criteria.
Sort By:
Page of 1
Commercial Products Group SPHHDVSMR - PowerTone High Output Speaker - High Output, Hazardous areas Commercial Products Group SPHP-DVSMR - High Output Speaker, Surface Mount, 25 VRMS or 70 VRMS, Red.
Description
CPG Signals Model SPHH PowerTone High Output Speaker is designed for use in hazardous locations. The unit producers a crisp, clear, high-decibel tone/voice output. Tones may be generated by the PowerTone Signaling System or any 25Vrms or 70Vrms tone/voice audio system. The speaker cone and projector are of spun aluminum. The circuitry and tone card are contained in dust and moisture proof sealed housing of die-cast aluminum.
 
The speaker has a supervisory DC coupling capacitor and wattage taps from 0.5 to 15 watts. The speaker is UL Listed for indoor and outdoor use, is NEMA 3 rated, and is finished in red enamel. The PowerTone Speaker is designed for connection to system supervised alarm notification circuits.

Applications
The PowerTone Speaker is well suited for signaling in hazardous areas with high ambient noise levels and where a high efficiency, weatherproof and corrosion-resistant surface mount speaker is required.
 
The speaker is suitable for use in National Electrical Code (NFPA 70); Class I, Groups A, B, C, and D, Division 2; Class II, Groups F, G, Division 2; Class III hazardous locations. The speaker may be used with any 25Vrms or 70Vrms audio system. The speaker can be indoor or outdoor mounted. The SPHH is NEMA 3 rated.
Features
  • Operates on 25Vrms or 70Vrms signal lines.
  • Multiple power taps @ 0.5, 1, 2, 7, and 15 watts.
  • High dB output for coverage of large areas.
  • UL sound pressure level 102dB(A) at 10 feet. (see chart).
  • Built in 15 watt high efficiency compression driver.
  • Die-cast aluminum circuitry housing.
  • Wide frequency response, 400 4000Hz.
  • Supervisory capacitor.
  • NEMA 3 rated enclosure.
  • Indoor or outdoor mounting.
  • Description
    CPG Signals Model SPHP PowerTone High Output Speaker producers a crisp, clear, highdecibel tone/voice output. Tones may be generated by the PowerTone Signaling System or any 25Vrms or 70Vrms tone/voice audio system. The speaker cone and projector are of spun aluminum. The speaker circuitry is contained in dust and moisture proof sealed housing of die-cast aluminum.
     
    The speaker has a supervisory Dc coupling capacitor and wattage taps from 0.5 to 15 watts. The speaker is NEMA 3 rated, and is finished in red enamel. The PowerTone speaker is designed for connection to system supervised alarm notification circuits.
     
     HSI model V1971 synchronized strobe lights are available as an option when visual signaling is required. Strobes can be synchronized using Model VSYNC sync module. Both the speaker and strobe are listed for indoor and outdoor use.

    Features
  • Operates on 25Vrms or 70Vrms signal lines.
  • Multiple power taps @ 0.5, 1, 2, 7, and 15 watts.
  • High dB output for coverage of large areas.
  • UL sound pressure level 102dB(A) at 10 feet, (see chart).
  • Built-in 15 watt high efficiency compression driver.
  • Die-cast aluminum circuitry housing.
  • Wide frequency response, 400 4000Hz.
  • Supervisory capacitor.
  • NEMA 3 rated enclosure.
  • Indoor and outdoor mounting.
  • V1971 sync/non-sync strobe lights available in 15/75, 30/75, 75, and 110 candela models. ADA compliant.
  • Independent or simultaneous strobe operation
  • Commercial Products Group SPHX-DVSMR - Explosion-proof Speaker, Surface Mount, 25 VRMS or 70 VRMS, Red. Commercial Products Group SPLF-70PRW - Low Profile Speaker - 70V, Plate Round, White
    Description
    CPG Signals Model SPHX PowerTone Explosion-proof Speaker is designed for use in hazardous locations. The unit produces a crisp, clear, high decibel tone/voice output. Tones may be generated by the PowerTone Signaling System or any 25 Vrms or 70 Vrms tone/voice audio system.

    The speaker cone and projector are of spun aluminum. The speaker driver and circuitry are contained in a explosion-proof housing. The speaker has a supervisory DC coupling capacitor and wattage taps from 0.5 to 15 watts. The speaker is listed for indoor or outdoor use, is NEMA 3 rated, and is finished in red enamel. The PowerTone speaker is designed for connection to system supervised alarm notification circuits.

    Application
    The PowerTone speaker is well suited for signaling in hazard ous areas with high ambient noise levels where a high efficiency, weatherproof and corrosion-resistant surface mount speaker is required. The speaker is designed for locations where the danger of explosion or fire exists.

    The speaker is suitable for use in National Electrical Code (NFPA 70): Class I, Groups B, C, and D, Division 1 hazardous locations. The speaker may be used with any 25 Vrms or 70 Vrms audio system. The speaker can be mounted indoor or outdoor. The SPHX is NEMA 3 rated.

    Features
  • Operates on 25 Vrms or 70 Vrms signal lines.
  • Multiple power taps @ 0.5, 1, 2, 7, and 15 watts.
  • High dB output for coverage of large areas.
  • UL sound pressure level 99 dB(A) at 10 feet. (see chart)
  • Built-In 15 watt high efficiency compression driver.
  • Rugged explosion-proof circuitry housing.
  • Wide frequency response, 400 4000 Hz.
  • Supervisory capacitor.
  • NEMA 3 rated enclosure.
  • Indoor or outdoor mounting.
  • DESCRIPTION

    PowerTone Model SPL Low Profile Series speakers are

    designed to reproduce electronically generated warning

    tones and full range voice communication. The speakers

    are designed for 25 and 70 volt UL Listed audio systems.

    Unlike conventional fire alarm speakers, Model SPL Low

    Profile speakers can be mounted in a standard depth, 4"

    square back box with no extension ring. Wattage can be

    adjusted to 1/4, 1/2, 1, and 2 watts by simply moving a clip to

    the desired tap setting. The SPL speaker is designed for

    connection to system supervised alarm notification circuits.

    An optional auxiliary terminal is available. CPG Model

    V1971 synchronized strobe lights are available as an option

    when visual signaling is required. Strobes can be synchronized

    using Model VSYNC sync module.

    APPLICATION

    The PowerTone Low Profile Series speakers produce a

    broad frequency range which provides both the low and hifidelity

    response required for effective tone and voice alarm

    notification. Available mounting options include 7-3/16"

    diameter round or 5-3/4" square vinyl clad metal plate grills

    and also a patented, folded 4-1/2" square re-entrant housing

    which are available in red or white. Re-entrant models may

    be flush mounted using CPG FBL backbox or surface

    mounted on a standard four inch backbox. Plated models

    require a standard four inch backbox for mounting. For

    complete mounting information see instructions (#2561121).

    Model SPL speakers carry the following listings/approvals:

    Agency                                     Reference Number

    Underwriter's Laboratories          S6476

    California State Fire Marshal      7320-1517:103

    STANDARD FEATURES

    • Mounts to standard 4" back box with no extension ring.

    • Models for 25Vrms or 70Vrms signal lines.

    • Taps @ 1/4, 1/2, 1, 2 watts.

    • Tap setting selected by movable tap clip.

    • Wide frequency response, 400 - 4000Hz.

    • Supervisory capacitor.

    • Screw terminals for field wiring connections.

    • Wire strain reliefs provided for in/out wiring.

    • Round or square vinyl clad metal plate grill, red or white.

    • Vandal-resistant re-entrant housing, red or white.

    OPTIONAL FEATURES

    • V1971 sync/non-sync strobe lights available in 15/75,

    30/75, 75, and 110 candela models. ADA compliant.

    • Trim plates and flush box for Re-entrant model.

    • Auxiliary terminal.

    • Surface mount box available for square plate models.

    SPECIFICATIONS

    Alarm notification appliances shall be speakers capable of

    reproducing alarm tones or voice on all 25Vrms or 70Vrms

    audio systems. Speakers shall provide incremental tap

    settings of 1/4, 1/2, 1, and 2 watts. Tap settings shall be

    adjustable by the use of a movable tap clip. The speaker

    shall be capable of being mounted to a standard 4 inch

    square back box with no extension ring. Wire strain reliefs

    shall be provided for in/out wiring. The speaker shall

    produce a UL Sound Pressure Level at 10 feet up to

    87dB(A) at a 2 watt tap. The speaker shall be UL Listed for

    fire alarm signaling use. Alarm notification appliances shall

    be Commercial Products Group PowerTone Model SPL

    Low Profile Speakers.

    (OPTIONAL) When visual signaling is required, speaker

    shall allow for a surface mounted strobe. The strobe light

    shall operate at 24VDC using filtered or FWR DC power and

    shall comply with the UL 1971 Standard for Signaling

    Devices for the Hearing Impaired and ADA. The strobe

    lights shall be UL Rated for a light intensity output of 15/75,

    30/75, 75, or 110 candela with a 1Hz flash rate. The strobe

    lights shall be synchronized when used with VSYNC synchronization

    module. Visual signal strobe shall allow for

    FIRE marking in the vertical position for wall orientation.

    Speakers and optional strobes shall be UL Listed for fire

    alarm signaling use. Speaker/strobes shall be CPG Model

    SPL Low Profile Series with Model V1971 strobe lights.

     

       
     
     
     

    Enter your email for a chance to WIN $100 Amex Gift Card.

    Please Enter Your Email Address

    *One entry per household please