You are here: Home > Shop Brands > Locknetics > Power Supplies, Monitoring Devices & Accessories
We found 26 results matching your criteria.

McAfee Secure sites help keep you safe from identity theft, credit card fraud, spyware, spam, viruses and online scams

Power Supplies, Monitoring Devices & Accessories

  Accessories
  Consoles
  Monitoring Stations
  Power Supplies & Transformers
Accessories
Consoles
Monitoring Stations
Power Supplies & Transformers
Sort By:
Page of 3
Fire-Lite UDACT-F Universal DACT Wheelock 109209 005 - HORN STROBE EXPLOSION PROOF 24V RED LENS RED FINISH
The Fire•Lite UDACT-F Universal Digital Alarm Communicator Transmitter may be used on the MS-9200, MS-9600 and Sensiscan 2000 Fire Alarm Control Panels (FACPs). The UDACT-F transmits system status to UL listed Central Station Receivers via the public switched telephone network. The UDACT-F is compact in size and may be mounted inside the host control panel or may mount externally in a separate cabinet. EIA-485 annunciator communications bus and regulated 24-volt connections are required. The UDACT-F transmits 198 points or 56 zones when connected to the MS-9200, up to 636 points or 98 zones when connected to the MS-9600, and 56 zones when connected to the Sensiscan 2000.

Wheelock 109209 005 - HORN STROBE EXPLOSION PROOF 24V RED LENS RED FINISH

Wheelock 109209010 - HORN STROBE COMBO 24 VOLT CLEAR LENS RED FINISH Wheelock MT4-115-WH-VNS - MULTI TONE 15 CD 4 WIRE 115AC-SILVER STROBE

Wheelock 109209010 - HORN STROBE COMBO 24 VOLT CLEAR LENS RED FINISH

Description:


The Wheelock Series MT and MT Strobe Multitone electronic appliances offer a choice of eight (8) nationally and internationally recognized alerting sounds: Horn, Bell, March Time Horn, Code-3 Tone, Code-3 Horn, Slow Whoop, Siren or Hi/Lo Tone. The Code-3 Horn and tone patterns are engineered to comply with NFPA/ANSI Temporal Pattern specifications without requiring additional equipment. With MT and MT Strobe appliances, one alarm appliance meets most of your signaling needs. The MT strobes can be synchronized using the Wheelock SM, DSM Sync Modules or the PS-24-8MC Power Supply with the Wheelock patented Sync Protocol.
The MT Strobes are designed for ADA applications while meeting or exceeding the latest requirements of NFPA 72, ANSI 117.1, UFC and UL Standard 1971 as well as meeting ADA requirements concerning photosensitive epilepsy.
Each MT and MT Strobe appliance has two installer selective sound output levels: STANDARD dBA and HIGH dBA. Non-strobe versions provide selectable voltage capability in one unit, 12VDC or 24VDC. Strobe versions are specific for either 12VDC or 24VDC and all models may be used with filtered or unfiltered (full-wave-rectified) input voltages. Separate input terminals are available, shunt wires are provided to enable both tone and strobe to operate simultaneously from a single input.
The Series MT Multitone Strobe appliances are UL Listed for indoor wall mount applications under Standard 1971 for Signaling Devices for the Hearing Impaired and under Standard 464 for Audible Signaling Appliances.

Features:

• Approvals include: UL Standard 1971, UL Standard 464, California State Fire Marshal (CSFM), New York City (MEA), Factory Mutual (FM) and Chicago (BFP) See approvals by model in Specifications and Ordering Information
• Designed to meet or exceed ADA/NFPA/UFC/ANSI Standards and Accessibility Guidelines
• Complies with OSHA 29, Part 1910.165
• Series MT appliances have IN and OUT wiring terminations that accept two #12 to #18 American Wire Gauge (AWG) wires at each terminal. Inputs are polarized for compatibility with standard reverse polarity type supervision
• One alarm appliance with (8) eight selective signals to provide superior sound penetration for various ambient and wall conditions with two field selectable sound output levels
• Code-3 Horn and Tone meet ANSI/NFPA temporal pattern for standard emergency evacuation signaling
• Audible and strobe can operate from a single NAC circuit or from separate NAC circuits with any of the (8) eight audible sounds
• MT Strobe models are available with Wheelock patented MCW Multi-Candela strobes with field selectable c andela settings at 15/30/75/110cd or with single candela 1575cd strobes. The strobes can be synchronized using Wheelock sync modules or power supplies with built in Sync Protocol
• Selectable input voltage on non-strobe versions. Strobe versions are factory set for either 12 or 24VDC, with wide- Listed voltage range, filtered (DC) and FWR
• No additional trimplate required for flush mounting

Wheelock MT4-12/24-S - HORN 12 OR 24VDC 4 WIRE SILVER GRAY Wheelock STH-2R24MCCH-MR - HORN STROBE EMERGENCY RED NOT "G"

Description:


The Wheelock Series MT and MT Strobe Multitone electronic appliances offer a choice of eight (8) nationally and internationally recognized alerting sounds: Horn, Bell, March Time Horn, Code-3 Tone, Code-3 Horn, Slow Whoop, Siren or Hi/Lo Tone. The Code-3 Horn and tone patterns are engineered to comply with NFPA/ANSI Temporal Pattern specifications without requiring additional equipment. With MT and MT Strobe appliances, one alarm appliance meets most of your signaling needs. The MT strobes can be synchronized using the Wheelock SM, DSM Sync Modules or the PS-24-8MC Power Supply with the Wheelock patented Sync Protocol.
The MT Strobes are designed for ADA applications while meeting or exceeding the latest requirements of NFPA 72, ANSI 117.1, UFC and UL Standard 1971 as well as meeting ADA requirements concerning photosensitive epilepsy.
Each MT and MT Strobe appliance has two installer selective sound output levels: STANDARD dBA and HIGH dBA. Non-strobe versions provide selectable voltage capability in one unit, 12VDC or 24VDC. Strobe versions are specific for either 12VDC or 24VDC and all models may be used with filtered or unfiltered (full-wave-rectified) input voltages. Separate input terminals are available, shunt wires are provided to enable both tone and strobe to operate simultaneously from a single input.
The Series MT Multitone Strobe appliances are UL Listed for indoor wall mount applications under Standard 1971 for Signaling Devices for the Hearing Impaired and under Standard 464 for Audible Signaling Appliances.

Features:

• Approvals include: UL Standard 1971, UL Standard 464, California State Fire Marshal (CSFM), New York City (MEA), Factory Mutual (FM) and Chicago (BFP) See approvals by model in Specifications and Ordering Information
• Designed to meet or exceed ADA/NFPA/UFC/ANSI Standards and Accessibility Guidelines
• Complies with OSHA 29, Part 1910.165
• Series MT appliances have IN and OUT wiring terminations that accept two #12 to #18 American Wire Gauge (AWG) wires at each terminal. Inputs are polarized for compatibility with standard reverse polarity type supervision
• One alarm appliance with (8) eight selective signals to provide superior sound penetration for various ambient and wall conditions with two field selectable sound output levels
• Code-3 Horn and Tone meet ANSI/NFPA temporal pattern for standard emergency evacuation signaling
• Audible and strobe can operate from a single NAC circuit or from separate NAC circuits with any of the (8) eight audible sounds
• MT Strobe models are available with Wheelock patented MCW Multi-Candela strobes with field selectable c andela settings at 15/30/75/110cd or with single candela 1575cd strobes. The strobes can be synchronized using Wheelock sync modules or power supplies with built in Sync Protocol
• Selectable input voltage on non-strobe versions. Strobe versions are factory set for either 12 or 24VDC, with wide- Listed voltage range, filtered (DC) and FWR
• No additional trimplate required for flush mounting

Description:
The Wheelock Series STH Cluster Speaker with MCCH Multi-Candela Strobe is designed for indoor ceiling mounting in high ambient noise environments. It is available with 2, 3 or 4 speakers for wide area coverage. The Cluster Speaker Strobe is supplied with STH-15SR, UL1480 Listed horns and one RSS-24MCCH, UL1971 Listed ceiling strobe mounted to a NEMA 1 steel enclosure. The strobe is synchronizable. The Series STH Cluster Speaker with MCCH Strobe come fully assembled.
Series STH Cluster Speaker with MCCH Strobes is designed for UL Required Fire Life Safety applications.
STH-4R24MCCH
Supplied with four STH-15SR horns and one
RSS-24MCCH Strobe. The strobe plate has the following optioins:
-Red with no lettering
-Red with FIRE lettering
-White with no lettering
-White with FIRE lettering
STH-3R24MCCH
Supplied with three STH-15SR horns and one
RSS-24MCCH Strobe. The strobe plate has the following options:
-Red with no lettering
-Red with FIRE lettering
-White with no lettering
-White with FIRE lettering
STH-2R24MCCH
Supplied with two STH-15SR horns and one
RSS-24MCCH Strobe. The strobe plate has the following options:
-Red with no lettering
-Red with FIRE lettering
STH-90-R24MCCH-NR
Supplied with two STH-15SR horns and one
RSS-24MCCH Strobe, designed for corner mount. The strobe plate has the following options:
-Red with no lettering
-Red with FIRE lettering
Features for all Cluster Speaker Models:
• STH-15SR Speakers are UL Standard 1480 Listed.
• RSS-24MCCH Strobes are UL Standard 1971 Listed
• Compliant with ADA, OSHA 1910.165, ANSI 117.1, NFPA 72, NFPA 101, and IFC
• Cluster and Strobe wiring can be monitored for integrity by the Control Panel
• Cluster Speaker Strobes come fully assembled
• High efficiency unit for fire life safety and/or general
communication announcing/notification
• Provides high-intelligibility voice reproduction and high intensity visual alerting for emergency life safety applications, alarm and protective signaling
• Speakers and Strobes are prefabricated to a 10” x 10” x 6” NEMA 1 steel enclosure for indoor use.
• Mounts to ceiling
• Only 1 pair of wires needed for audio connections
• Strobes are connected to the NAC Strobe Circuit and are select¬able 115 or 177 cd
• Each individual STH-15SR horn is capable of delivering up to 102 dB at 15 watts at 10 feet
• Omni-direction
• Conduit knockouts for ½” or Ύ” coupling
• Labor Saving
Applications for Series Cluster Speaker Strobes:
Designed for use in Manufacturing Plants, and Factories with high ambient noise levels and for UL Required Fire Life Safety Applica¬tions.
• Hazard warning/alerting
• Industrial audible and visual signaling
• Process control area notification
• Warning lights
• Security alert indication
• Emergency notification
• Employee notification

STH-15SR Horn Loudspeakers
• UL Standard 1480 Listed
• Supervised weather proof horn speaker
• Up to 15 watts RMS of power handling capability
• Superior intelligibility and sound dispersion
• Built-in 25/70 Volt transformer w/screwdriver adjustable watt¬age tape selector
• Frequency Response: 400 – 14,000 Hz
• Power taps: 25 Volts: .48, .94, 1.8, 7.5, and 15
70 Volts: .9, 1.8, 3.8, 7.5, and 15
• Swivel mounted for easy angle adjustment
• Refer to Data Sheet S0100 for detailed specs on horn

RSS-24MCCH Strobe
• UL Standard 1971 Listed
• High intensity selectable115 or 177 candela ceiling strobe
• Factory setting is 177 candela
• Synchronizable when used with SM/DSM or Wheelock PS-24- 8MC Power Supply or Wheelock’s SAFEPATH or SAFEPATH4
• 24 VDC input voltage
• 2-Wire connection
• Current draw @ 24 VDC: 115cd - 0.195
177cd - 0.270
• Strobes produce 1 flash per second over the
regulated voltage range
• Refer to Data Sheet S0410 for detailed strobe specs

Wheelock STH-4G24MCCH-ALW - HORN STROBE HI CANDELLA ALERT WHITE Wheelock STH-4G24MCCH-NR- Supervised Speaker Strobe supplied with four STH-15SR horns and one RSS-24MCCH ceiling strobe mounted to a NEMA 1 steel enclosure. RED - Lettering
Description:
The Wheelock Series STH Cluster Speaker with MCCH Multi-Candela Strobe is designed for indoor ceiling mounting in high ambient noise environments. It is available with 2, 3 or 4 speakers for wide area coverage. The Cluster Speaker Strobe is supplied with STH-15SR, UL1480 Listed horns and one RSS-24MCCH, UL1971 Listed ceiling strobe mounted to a NEMA 1 steel enclosure. The strobe is synchronizable. The Series STH Cluster Speaker with MCCH Strobe come fully assembled.
Series STH Cluster Speaker with MCCH Strobes is designed for UL Required Fire Life Safety applications.
STH-4R24MCCH
Supplied with four STH-15SR horns and one
RSS-24MCCH Strobe. The strobe plate has the following optioins:
-Red with no lettering
-Red with FIRE lettering
-White with no lettering
-White with FIRE lettering
STH-3R24MCCH
Supplied with three STH-15SR horns and one
RSS-24MCCH Strobe. The strobe plate has the following options:
-Red with no lettering
-Red with FIRE lettering
-White with no lettering
-White with FIRE lettering
STH-2R24MCCH
Supplied with two STH-15SR horns and one
RSS-24MCCH Strobe. The strobe plate has the following options:
-Red with no lettering
-Red with FIRE lettering
STH-90-R24MCCH-NR
Supplied with two STH-15SR horns and one
RSS-24MCCH Strobe, designed for corner mount. The strobe plate has the following options:
-Red with no lettering
-Red with FIRE lettering
Features for all Cluster Speaker Models:
• STH-15SR Speakers are UL Standard 1480 Listed.
• RSS-24MCCH Strobes are UL Standard 1971 Listed
• Compliant with ADA, OSHA 1910.165, ANSI 117.1, NFPA 72, NFPA 101, and IFC
• Cluster and Strobe wiring can be monitored for integrity by the Control Panel
• Cluster Speaker Strobes come fully assembled
• High efficiency unit for fire life safety and/or general
communication announcing/notification
• Provides high-intelligibility voice reproduction and high intensity visual alerting for emergency life safety applications, alarm and protective signaling
• Speakers and Strobes are prefabricated to a 10” x 10” x 6” NEMA 1 steel enclosure for indoor use.
• Mounts to ceiling
• Only 1 pair of wires needed for audio connections
• Strobes are connected to the NAC Strobe Circuit and are select¬able 115 or 177 cd
• Each individual STH-15SR horn is capable of delivering up to 102 dB at 15 watts at 10 feet
• Omni-direction
• Conduit knockouts for ½” or Ύ” coupling
• Labor Saving
Applications for Series Cluster Speaker Strobes:
Designed for use in Manufacturing Plants, and Factories with high ambient noise levels and for UL Required Fire Life Safety Applica¬tions.
• Hazard warning/alerting
• Industrial audible and visual signaling
• Process control area notification
• Warning lights
• Security alert indication
• Emergency notification
• Employee notification

STH-15SR Horn Loudspeakers
• UL Standard 1480 Listed
• Supervised weather proof horn speaker
• Up to 15 watts RMS of power handling capability
• Superior intelligibility and sound dispersion
• Built-in 25/70 Volt transformer w/screwdriver adjustable watt¬age tape selector
• Frequency Response: 400 – 14,000 Hz
• Power taps: 25 Volts: .48, .94, 1.8, 7.5, and 15
70 Volts: .9, 1.8, 3.8, 7.5, and 15
• Swivel mounted for easy angle adjustment
• Refer to Data Sheet S0100 for detailed specs on horn

RSS-24MCCH Strobe
• UL Standard 1971 Listed
• High intensity selectable115 or 177 candela ceiling strobe
• Factory setting is 177 candela
• Synchronizable when used with SM/DSM or Wheelock PS-24- 8MC Power Supply or Wheelock’s SAFEPATH or SAFEPATH4
• 24 VDC input voltage
• 2-Wire connection
• Current draw @ 24 VDC: 115cd - 0.195
177cd - 0.270
• Strobes produce 1 flash per second over the
regulated voltage range
• Refer to Data Sheet S0410 for detailed strobe specs

Description:
The Wheelock Series STH Cluster Speaker with MCCH Multi-Candela Strobe is designed for indoor ceiling mounting in high ambient noise environments. It is available with 2, 3 or 4 speakers for wide area coverage. The Cluster Speaker Strobe is supplied with STH-15SR, UL1480 Listed horns and one RSS-24MCCH, UL1971 Listed ceiling strobe mounted to a NEMA 1 steel enclosure. The strobe is synchronizable. The Series STH Cluster Speaker with MCCH Strobe come fully assembled.
Series STH Cluster Speaker with MCCH Strobes is designed for UL Required Fire Life Safety applications.
STH-4R24MCCH
Supplied with four STH-15SR horns and one
RSS-24MCCH Strobe. The strobe plate has the following optioins:
-Red with no lettering
-Red with FIRE lettering
-White with no lettering
-White with FIRE lettering
STH-3R24MCCH
Supplied with three STH-15SR horns and one
RSS-24MCCH Strobe. The strobe plate has the following options:
-Red with no lettering
-Red with FIRE lettering
-White with no lettering
-White with FIRE lettering
STH-2R24MCCH
Supplied with two STH-15SR horns and one
RSS-24MCCH Strobe. The strobe plate has the following options:
-Red with no lettering
-Red with FIRE lettering
STH-90-R24MCCH-NR
Supplied with two STH-15SR horns and one
RSS-24MCCH Strobe, designed for corner mount. The strobe plate has the following options:
-Red with no lettering
-Red with FIRE lettering
Features for all Cluster Speaker Models:
• STH-15SR Speakers are UL Standard 1480 Listed.
• RSS-24MCCH Strobes are UL Standard 1971 Listed
• Compliant with ADA, OSHA 1910.165, ANSI 117.1, NFPA 72, NFPA 101, and IFC
• Cluster and Strobe wiring can be monitored for integrity by the Control Panel
• Cluster Speaker Strobes come fully assembled
• High efficiency unit for fire life safety and/or general
communication announcing/notification
• Provides high-intelligibility voice reproduction and high intensity visual alerting for emergency life safety applications, alarm and protective signaling
• Speakers and Strobes are prefabricated to a 10” x 10” x 6” NEMA 1 steel enclosure for indoor use.
• Mounts to ceiling
• Only 1 pair of wires needed for audio connections
• Strobes are connected to the NAC Strobe Circuit and are select¬able 115 or 177 cd
• Each individual STH-15SR horn is capable of delivering up to 102 dB at 15 watts at 10 feet
• Omni-direction
• Conduit knockouts for ½” or Ύ” coupling
• Labor Saving
Applications for Series Cluster Speaker Strobes:
Designed for use in Manufacturing Plants, and Factories with high ambient noise levels and for UL Required Fire Life Safety Applica¬tions.
• Hazard warning/alerting
• Industrial audible and visual signaling
• Process control area notification
• Warning lights
• Security alert indication
• Emergency notification
• Employee notification

STH-15SR Horn Loudspeakers
• UL Standard 1480 Listed
• Supervised weather proof horn speaker
• Up to 15 watts RMS of power handling capability
• Superior intelligibility and sound dispersion
• Built-in 25/70 Volt transformer w/screwdriver adjustable watt¬age tape selector
• Frequency Response: 400 – 14,000 Hz
• Power taps: 25 Volts: .48, .94, 1.8, 7.5, and 15
70 Volts: .9, 1.8, 3.8, 7.5, and 15
• Swivel mounted for easy angle adjustment
• Refer to Data Sheet S0100 for detailed specs on horn

RSS-24MCCH Strobe
• UL Standard 1971 Listed
• High intensity selectable115 or 177 candela ceiling strobe
• Factory setting is 177 candela
• Synchronizable when used with SM/DSM or Wheelock PS-24- 8MC Power Supply or Wheelock’s SAFEPATH or SAFEPATH4
• 24 VDC input voltage
• 2-Wire connection
• Current draw @ 24 VDC: 115cd - 0.195
177cd - 0.270
• Strobes produce 1 flash per second over the
regulated voltage range
• Refer to Data Sheet S0410 for detailed strobe specs

Wheelock STH-90-R24MCCH-FR - Supervised Speaker Strobe supplied with two STH-15SR horns mounted adjacent to each other, designed for a corner mount configuration and one RSS-24MCCH ceiling strobe mounted to a NEMA 1 steel enclosure. Red with FIRE Let Channel Vision C-0437 4-In Telephone Distribution Modules
Description:
The Wheelock Series STH Cluster Speaker with MCCH Multi-Candela Strobe is designed for indoor ceiling mounting in high ambient noise environments. It is available with 2, 3 or 4 speakers for wide area coverage. The Cluster Speaker Strobe is supplied with STH-15SR, UL1480 Listed horns and one RSS-24MCCH, UL1971 Listed ceiling strobe mounted to a NEMA 1 steel enclosure. The strobe is synchronizable. The Series STH Cluster Speaker with MCCH Strobe come fully assembled.
Series STH Cluster Speaker with MCCH Strobes is designed for UL Required Fire Life Safety applications.
STH-4R24MCCH
Supplied with four STH-15SR horns and one
RSS-24MCCH Strobe. The strobe plate has the following optioins:
-Red with no lettering
-Red with FIRE lettering
-White with no lettering
-White with FIRE lettering
STH-3R24MCCH
Supplied with three STH-15SR horns and one
RSS-24MCCH Strobe. The strobe plate has the following options:
-Red with no lettering
-Red with FIRE lettering
-White with no lettering
-White with FIRE lettering
STH-2R24MCCH
Supplied with two STH-15SR horns and one
RSS-24MCCH Strobe. The strobe plate has the following options:
-Red with no lettering
-Red with FIRE lettering
STH-90-R24MCCH-NR
Supplied with two STH-15SR horns and one
RSS-24MCCH Strobe, designed for corner mount. The strobe plate has the following options:
-Red with no lettering
-Red with FIRE lettering
Features for all Cluster Speaker Models:
• STH-15SR Speakers are UL Standard 1480 Listed.
• RSS-24MCCH Strobes are UL Standard 1971 Listed
• Compliant with ADA, OSHA 1910.165, ANSI 117.1, NFPA 72, NFPA 101, and IFC
• Cluster and Strobe wiring can be monitored for integrity by the Control Panel
• Cluster Speaker Strobes come fully assembled
• High efficiency unit for fire life safety and/or general
communication announcing/notification
• Provides high-intelligibility voice reproduction and high intensity visual alerting for emergency life safety applications, alarm and protective signaling
• Speakers and Strobes are prefabricated to a 10” x 10” x 6” NEMA 1 steel enclosure for indoor use.
• Mounts to ceiling
• Only 1 pair of wires needed for audio connections
• Strobes are connected to the NAC Strobe Circuit and are select¬able 115 or 177 cd
• Each individual STH-15SR horn is capable of delivering up to 102 dB at 15 watts at 10 feet
• Omni-direction
• Conduit knockouts for ½” or Ύ” coupling
• Labor Saving
Applications for Series Cluster Speaker Strobes:
Designed for use in Manufacturing Plants, and Factories with high ambient noise levels and for UL Required Fire Life Safety Applica¬tions.
• Hazard warning/alerting
• Industrial audible and visual signaling
• Process control area notification
• Warning lights
• Security alert indication
• Emergency notification
• Employee notification

STH-15SR Horn Loudspeakers
• UL Standard 1480 Listed
• Supervised weather proof horn speaker
• Up to 15 watts RMS of power handling capability
• Superior intelligibility and sound dispersion
• Built-in 25/70 Volt transformer w/screwdriver adjustable watt¬age tape selector
• Frequency Response: 400 – 14,000 Hz
• Power taps: 25 Volts: .48, .94, 1.8, 7.5, and 15
70 Volts: .9, 1.8, 3.8, 7.5, and 15
• Swivel mounted for easy angle adjustment
• Refer to Data Sheet S0100 for detailed specs on horn

RSS-24MCCH Strobe
• UL Standard 1971 Listed
• High intensity selectable115 or 177 candela ceiling strobe
• Factory setting is 177 candela
• Synchronizable when used with SM/DSM or Wheelock PS-24- 8MC Power Supply or Wheelock’s SAFEPATH or SAFEPATH4
• 24 VDC input voltage
• 2-Wire connection
• Current draw @ 24 VDC: 115cd - 0.195
177cd - 0.270
• Strobes produce 1 flash per second over the
regulated voltage range
• Refer to Data Sheet S0410 for detailed strobe specs

The C-0437 is a telephone module that distributes 4 Central Office lines to 12 locations. Vertical RJ-45 jacks allow convenient access to connections. The C-0437 is ideal for installations which require telephone service at several locations, but have very little space inside the structured wiring enclosure for large telephone modules.
Channel Vision C-0438 4x7 Telephone Distribution Module Channel Vision C-0439 4x15 Telephone Distribution Module
The C-0438 telephone modules accepts 4 incoming lines and can distribute up to 7 location. It has 110 punchdown connectors for an easy install and can be used with Cat5 cables. With our new telephone distribution modules, you can efficiently distribute four CO lines to up to 15 locations. All models feature 110 punch down connectors and compact design for easy installation into our structured wiring panels.

Specifications:

110 connectors: 8 (bridged)
Dimensions: 4.0"L x 6.38" W x 1.75" D
Telephone inputs: 1 (4 lines)
Telephone outputs: 7 (4 lines)
The C-0439 telephone module accepts 4 incoming lines and can distribute up to 15 locations. The modules have 110 punchdown connectors for easy installation and accept common Cat5 cables. With our new telephone distribution modules, you can efficiently distribute four CO lines to up to 15 locations. All models feature 110 punch down connectors and compact design for easy installation into our structured wiring panels

Specifications:

110 connectors: 16 (bridged)
Dimensions: 5.13"L x 6.38" W x 1.75" D
Telephone inputs: 1 (4 lines)
Telephone outputs: 15 (4 lines)
   
 
 
 

Enter your email for a chance to WIN $100 Amex Gift Card.

Please Enter Your Email Address

*One entry per household please