The SG-32 Series is a family of versatile, high-quality, metal Fire Alarm Pull Stations (red) designed to meet any installation demand. Available in both single and dual action configurations, SG-32 may be configured with either SPST or DPST contacts. A terminal strip for field connections is provided. The normally open contact of each station, which closes when the pull station is activated, is rated for 1 Amp, 30VDC. The contacts are gold plated to avoid risk of corrosion. All models in the SG-32 Series have been tested by ULI and found in compliance to the latest requirements of the American’s With Disabilities Act (ADA).
SG-32 stations from Signal Communications Corporation are available with either hex locks or key reset. Key reset models are available for interchangeable keys. All models mount on a standard, single-gang backbox, SigCom model SGB-32S interior surface metal backbox or model SGB-32C, (SG-WP) weatherproof backbox.
SG-32 Series stations are also available in optional colors (other than red) for special application.

The SG-32 Series is operated by pulling the handle marked “PULL” on the front of the station as far down as it will go. At that point, the station will lock in place and is easily visible from up to 50 feet. The activation handle is reset by opening the station with the hex wrench or key, placing the handle in the normal upright position and relocking the station. On the dual action, the push bar rotates inward allowing the “PULL” handle to be grasped and operated by a single hand.

The SG-32 Series is a family of versatile, high-quality, metal Fire Alarm Pull Stations (red) designed to meet any installation demand. Available in both single and dual action configurations, SG-32 may be configured with either SPST or DPST contacts. A terminal strip for field connections is provided. The normally open contact of each station, which closes when the pull station is activated, is rated for 1 Amp, 30VDC. The contacts are gold plated to avoid risk of corrosion. All models in the SG-32 Series have been tested by ULI and found in compliance to the latest requirements of the American’s With Disabilities Act (ADA).
SG-32 stations from Signal Communications Corporation are available with either hex locks or key reset. Key reset models are available for interchangeable keys. All models mount on a standard, single-gang backbox, SigCom model SGB-32S interior surface metal backbox or model SGB-32C, (SG-WP) weatherproof backbox.
SG-32 Series stations are also available in optional colors (other than red) for special application.

The SG-32 Series is operated by pulling the handle marked “PULL” on the front of the station as far down as it will go. At that point, the station will lock in place and is easily visible from up to 50 feet. The activation handle is reset by opening the station with the hex wrench or key, placing the handle in the normal upright position and relocking the station. On the dual action, the push bar rotates inward allowing the “PULL” handle to be grasped and operated by a single hand.

The SG-32 Series is a family of versatile, high-quality, metal Fire Alarm Pull Stations (red) designed to meet any installation demand. Available in both single and dual action configurations, SG-32 may be configured with either SPST or DPST contacts. A terminal strip for field connections is provided. The normally open contact of each station, which closes when the pull station is activated, is rated for 1 Amp, 30VDC. The contacts are gold plated to avoid risk of corrosion. All models in the SG-32 Series have been tested by ULI and found in compliance to the latest requirements of the American’s With Disabilities Act (ADA).
SG-32 stations from Signal Communications Corporation are available with either hex locks or key reset. Key reset models are available for interchangeable keys. All models mount on a standard, single-gang backbox, SigCom model SGB-32S interior surface metal backbox or model SGB-32C, (SG-WP) weatherproof backbox.
SG-32 Series stations are also available in optional colors (other than red) for special application.

The SG-32 Series is operated by pulling the handle marked “PULL” on the front of the station as far down as it will go. At that point, the station will lock in place and is easily visible from up to 50 feet. The activation handle is reset by opening the station with the hex wrench or key, placing the handle in the normal upright position and relocking the station. On the dual action, the push bar rotates inward allowing the “PULL” handle to be grasped and operated by a single hand.