You are here: Home > Shop Brands > Camden Door Controls > Door Activation Devices > Key Switches > Narrow Stainless Steel Key Switches
We found 9 results matching your criteria.
Sort By:
Page of 1
Camden CM-2220 Stainless Steel Key Switch -Narrow, SPDT Momentary Camden CM-2270 Narrow Key Switch, SPDT Momentary and SPDT Maintained

Stainless Steel Key Switch -Narrow, SPDT Momentary

CAMDEN DOOR CONTROLS, CM-1200 and CM-2200 Series flush mount switches meet the stringent demands of key switch controls. They are designed for use with standard 1", 1 1⁄8 ", or 1 1⁄4 " mortise cylinders.

The CM-1200 is single gang 2 3⁄4 " width, CM-2200 is only 1 3⁄4 " wide, perfect for door frames or narrow areas. Both models accept one or two switches, and have a counter sunk cylinder opening, in a one piece casted assembly. A brass cylinder lock ring, 2 socket/slotted screws, and 2 tamperproof screws, are also supplied. (The mortise cylinder is available separately from Camden Door Controls.) The design and construction makes it ideal for all weather environments. The assembly is tamper and vandal resistant.

CM Key Switches are flexible, and can be supplied in numerous switch configurations to suit varied commercial and industrial applications, and functions. CAMDEN Key Switches provide a practical, cost effective means for authorized personnel to control and signal various functions within a complex.

CM-1200 and CM-2200 Series Key Switches will control overhead doors, electric locks, electro-magnetic locks, electric strikes, and motors. They are also used for shunting, bypassing, timed functions, activating and deactivating CCTV and access control equipment, and other applications. They are constructed for high frequency use, and will accept a standard mortise cylinder.

All CM-1200 and 2200 Series Key Switches are supplied with a stainless steel faceplate, cylinder lock ring, 2 socket/slotted screws, and 2 tamperproof screws. (The mortise cylinder is not included, but is available from CAMDEN DOOR CONTROLS.)

  • Perfect for mounting on door jambs
  • Accepts standard mortise cylinders 1" - 1 1/4"
  • Vandal resistant
  • Tamper proof screws supplied
  • Left and/or right operation with a wide range of switch configurations
  • Optional LED indicators
  • CM-2270 Narrow Key Switch, SPDT Momentary and SPDT Maintained

    CAMDEN DOOR CONTROLS, CM-1200 and CM-2200 Series flush mount switches meet the stringent demands of key switch controls. They are designed for use with standard 1", 1 1⁄8 ", or 1 1⁄4 " mortise cylinders.

    The CM-1200 is single gang 2 3⁄4 " width, CM-2200 is only 1 3⁄4 " wide, perfect for door frames or narrow areas. Both models accept one or two switches, and have a counter sunk cylinder opening, in a one piece casted assembly. A brass cylinder lock ring, 2 socket/slotted screws, and 2 tamperproof screws, are also supplied. (The mortise cylinder is available separately from Camden Door Controls.) The design and construction makes it ideal for all weather environments. The assembly is tamper and vandal resistant.

    CM Key Switches are flexible, and can be supplied in numerous switch configurations to suit varied commercial and industrial applications, and functions. CAMDEN Key Switches provide a practical, cost effective means for authorized personnel to control and signal various functions within a complex.

    CM-1200 and CM-2200 Series Key Switches will control overhead doors, electric locks, electro-magnetic locks, electric strikes, and motors. They are also used for shunting, bypassing, timed functions, activating and deactivating CCTV and access control equipment, and other applications. They are constructed for high frequency use, and will accept a standard mortise cylinder.

    All CM-1200 and 2200 Series Key Switches are supplied with a stainless steel faceplate, cylinder lock ring, 2 socket/slotted screws, and 2 tamperproof screws. (The mortise cylinder is not included, but is available from CAMDEN DOOR CONTROLS.)

  • Perfect for mounting on door jambs
  • Accepts standard mortise cylinders 1" - 1 1/4"
  • Vandal resistant
  • Tamper proof screws supplied
  • Left and/or right operation with a wide range of switch configurations
  • Optional LED indicators
  • HAI 20A00-52 Omni IIe Controller for Structured Wiring Enclosures HAI 20A04-1UPG Firmware Upgrade Chip for the Omni II
    An ideal and economical choice for mid-range homes and small businesses, Omni IIe is the middle member of HAI's best-selling Omni product line. Omni IIe features three built-in serial ports and an ethernet port for connection to additional control devices. It supports numerous Omni-family accessories, including a complete line of fully communicating thermostats. The Omni IIe is available in an enclosure (HAI Part Number 20A00-50) or the Omni IIe board may be purchased separately (HAI Part Number 20A00-53).

    Specifications:

    Mounting plate for leviton, onq/legrand, ustec & open house enclosures
    Includes upb powerline interface module & cable, rj31x cord & jack, manuals, accessory kit & wiring diagram for the enclosure door
    For professional installation only
    EPROM chip upgrade with installation instructions (for the latest version). Not required for flash updatable controllers. Specify chip part number suffix when ordering.

    Specifications:

    HAI Product No.: 20A04-1UPG
    Compatibility: Omni II
    Version: 2.9
    HAI 20A04-2UPG Firmware Upgrade Chip for the OmniPro II HAI 20A04-50UPG Firmware Upgrade Chip for the Omni IIe
    Buy now and take advantage of our low prices and great services for HAI 20A04-2UPG Firmware Upgrade Chip for the OmniPro II.

    Specifications:

    Manufacturer: HAI
    Manufacturer Product No.: 20A04-2UPG
    Compatibility: OmniPro II
    Version: 2.10
    HAI EPROM chip upgrade with installation instructions is only used to update older boards that do not have flash memory. Newer boards have flash memory for easy firmware updates and 5 serial ports.
    HAI 21A00-11 Omni LT for Structured Wiring Enclosures HAI 21A03-1 Firmware Upgrade Chip for the Omni LT - Replaces Part 21A031UPG
    An ideal and economical choice for homes, townhouses, condos, apartments and small businesses, Omni LT is the entry level member of HAI's best-selling Omni product line. Omni LT features one built-in serial port for connection to additional control devices. It supports numerous Omni family accessories, including a complete line of fully communicating thermostats. The Omni LT is available with an enclosure (HAI Part Number 21A00-1). Additionally, the Omni LT board may be purchased separately (HAI Part Number 21A00-2). Omni LT controller on mounting plate for installation in structured wiring enclosures, UPB Powerline Interface Module and cable, RJ31X jack and cable, manuals, accessory kit, and wiring label for enclosure door.

    Specifications:

    HAI Product No.: 21A00-11
    Recommended Use: Homes smaller than 2,000 sq. ft.
    Control Capability: Up to 26 different lights, appliances or groups; 16 via powerline carrier control modules
    Zones: 8, expandable to 24
    Outputs: 2 hardwire, expandable to 10
    Power Supply: 16.5-Volt AC power supply and back-up battery required (each sold separately)
    Buy now and take advantage of our low prices and great services for HAI 21A03-1 Firmware Upgrade Chip for the Omni LT - Replaces Part 21A031UPG.

    Specifications:

    HAI Product No.: 21A03-1
    Compatibility: OmniLT
    Version: 2.5
    HAI 21A07-2 Mounting Plate for Omni LT
    HAI 21A072 Mounting Plate for Omni LT. Mounting plate hardware kit & instructions. Used to mount Omni LT controllers in Leviton and "open house" type structured wiring enclosures. For use with an Omni LT home control system.

    Specifications:

    Household Size: up to 2000
    Thermostats: 2
    Consoles: 4
    Scenes: 16
    Lighting: 16
    Security: 8
    Expanded Security: 24
    User Codes: 8
    Programming Line: 100
       
     
     
     

    Enter your email for a chance to WIN $100 Amex Gift Card.

    Please Enter Your Email Address

    *One entry per household please