You are here: Home > Shop Brands > ESL Electro Signal Lab > Notification Appliances
We found 1 results matching your criteria.

McAfee Secure sites help keep you safe from identity theft, credit card fraud, spyware, spam, viruses and online scams

Notification Appliances

Sort By:
Page of 1
GE ESL 13-475 - Horn/Strobe, Red 15/75Cd, 30/120Cd,24Vdc

GE Interlogix Horn/Strobe Series is designed to comply with the Americans with Disability Act (ADA) and meet UL standard 1971 requirements for emergency signaling devices for the hearing impaired. The horn/strobe series features a unique candela intensity field selector switch for alternating the candela output from 15cd to 30cd (75cd on axis). The horn provides two different field selectable tones, and a High/Low output setting that can be achieved with the use of mini jumpers located on back of the unit. The strobe housing is clearly labeled with vertical “FIRE” lettering and is polarized for connecting to supervised fire alarm circuits. The strobe is designed with a xenon flashtube and provides a candela intensity field selector switch for maximum performance. The horn/strobe series is available in red and white housing 24VDC models. These models can be synchronized by using the 13–472 Sync Module to comply with NFPA recommendations concerning photosensitive epilepsy when installing 2 or more visual appliances within the field of view. The strobe signals are listed for indoor use, wall mount, under UL 1971 Standard.

The audible and visual alarm indicating appliance is GE Interlogix model number 13–475 or 13–476. The strobe is listed under UL 1971 Standard for signaling devices for the hearing impaired and is approved for fire protective service. The candela output is field selectable, having a dual setting of 15cd or 30cd output. The horn provides two different field selectable tones and a High and Low field selectable sound output setting. The signaling horn/strobe operates on 24VDC from a non-coded regulated DC supply or full-wave rectified, unfiltered supply. The signaling strobe is designed to produce a signal flash of one flash per second (1 Hz) with continuously applied minimum voltage. The horn/strobe is capable of WALL mounting to a universal backbox. Visual signaling devices are mounted 80” above the highest floor point or 6” below ceiling; (whichever is lowest) and are to be installed as per plans and specifications.

Standard Features
Screw terminal capacity up to 12 AWG
Universal mounting plate included with each unit
24VDC strobe with two field selectable settings
15cd or 30cd
Horn field selectable tones:
3000 Hz interrupted or Electro-mechanical
Temporal or Non-temporal
High or Low dBA output
Tamper-proof candela selector switch
Available in red or white housing
Designed to meet or exceed NFPA/ANSI Standards
and ADA Accessibility Guidelines
UL listed for wall mounting
Polarized strobes with wide listed voltage ranges
using filtered DC or unfiltered FWR input voltage.
Meets ADA guidelines for minimum one flash
per/sec (1 Hz).


Enter your email for a chance to WIN $100 Amex Gift Card.

Please Enter Your Email Address

*One entry per household please