4 Channel - 2 Zone - VOX - Mute - MOH - Phone Interface
DMA 2015 - 15 Watt RMS DMA 2030 - 30 Watt RMS DMA 2060 - 60 Watt RMS DMA 2120 - 120 Watt RMS
Phantom Power - Phantom Power is provided on all Inputs set asMicrophone.
Stereo Summing - Two separate RCA Jacks are providedfor Input 3 and 4 (Left and Right). A Stereo signal connectedto either Input is buffered and internally summed toMono.
Input 3 & 4 Attenuators - When the Inputs are set as AUX 1 andAUX 2 the input sensitivity may be varied by a rear panel VariableAttenuator. This feature allows to set the output level of Programsoriginating from different sources (CD, Satellite Receiver, etc.).
Phone Paging - A separate input is provided to interface with aPhone System. Input Impedance is 600 ohm, TransformerBalanced. A level control is available on the front panel.
Module Port - Por t accepts standard plug-in module.Module Level Control is provided on the front panel. See listof modules available from PASO.
MIX BUSS - This Input/Output may be utilized to parallel twoamplifiers or as an input for a Microphone Mixer or otheraudio source. When used as an Input the Amplifier Level andEqualization Controls have no effect.
Line Out - 600 ohm, 1.5 Volt Line Output.
Remote Volume Control - The AUX 1 Input Volume maybe adjusted from a remote location. The Remote VolumeInput utilizes a 10K Pot and is immune to Audio Interference(DC Operation).
Addressable Dual VOX System - The Dual VOX System canbe individually selected to operate independently on allInputs by means of jumpers . Any Input may be set to activateeither VOX 1 or VOX 2.
Addressable Dual Muting System - The Dual VOX Systemcan be individually selected to operate independently withall Inputs by means of jumpers . Any Input may be set toactivate either MUTE 1 or MUTE 2.
MUTE 2 Adjustable Delay - A rear panel control adjusts theMUTE 2 Time Delay (the time the MUTE 2 stays activated)from 3 Sec. to 60 Sec. Particularly useful to control thelength of time that an Input mutes another (for example AUX1 over AUX 2).
Music on Hold - Output Channel 1 - Channel 1 provides a1 Volt, 600 ohm balanced output and a 2 Watt, 8 ohm outputfor Music/Message on Hold or Zone 1 Speaker Output.Internal Jumper selects the source from either AUX 1, AUX2 or Input Module. Level Control is provided.
Output Channel 2 - Channel 2 provides a 2 Watt, 8 ohmoutput for Zone 2 Speaker Output. Internal Jumper selectsthe source from either AUX 1, AUX 2 or Input Module. LevelControl is provided.
EQ LINK - EQ Link (Preamp Out) (Power Amp In) jacks areprovided for External Equalizer. Activated by the EQ LinkSwitch.
Tone By-Pass Switch - The Tone by-pass switch defeatsthe setting of the Treble and Bass Controls. Should be usedwhen an External Equalizer is utilized.
24 VDC Supply Output - A 24 Volt DC, 250 mA regulatedPower Supply is provided for external accessories UL 6500 Listed (US - CANADA)
Telephone Paging Interface VOX - Voice Activated Muting MOH - 600 ohm balanced Music on Hold Output Phantom Power On Mic Selectable Mute Priority 1 Mic - 2 Aux 1 Watt, 8 ohm, 2nd Zone Output Mute/Unmute
Enter your email for a chance to WIN $100 Amex Gift Card.
Please Enter Your Email Address
*One entry per household please