You are here: Home > Napco Security - Old > Residential / Commercial
We found 2 results matching your criteria.
Sort By:
Page of 1
Napco IQPROFILER - Hardwired Pet-Immune PIR w/ Quick-Catch Napco IQVISION - Hardwired Pet-Immune PIR w/ Quick-Catch
IQ Profiler
  • 50 lb. pet immunity (22.7kg) & superior false alarm discrimination with unique dual focal lenses.
  • Installation in a snap with patented Quick-Mount and Quick-Wire terminals
  • Maximum range: 50 x 50 feet
  • New & improved Quick-Catch mode
  • Advanced microprocessor-based circuitry with proprietary NAPCO detection algorithms for optimal protection from false alarms without compromising catch
  • Bi-optic contour case and dual focal lenses provide exceptional distance profiling:
  • Far field lens allows for detection of large objects and ignores small targets nearby
  • Near field lens allows for discrimination of small targets nearby pet and rodent immunity
  • Shielded high-performance aspheric lenses
  • Look down/creep zones provide coverage beneath sensor
  • Sensor chamber prevents insect, draft, and dust interference.
  • Utilizes analog to digital signal conversion
  • Vertical aiming capabilities
  • Flat or corner mountable to 8.5’ (2.6m)
  • Wall mount and corner mount
  • Swivel aiming with optional SVL2 swivel bracket
  • Advanced microprocessor-based circuitry with built-in profiles of common false alarm sources:
  • 20v/m RF-shielded circuitry
  • Operating Temperature: 14°F to 122°F (-10° to +50°C)
  • Mounting: Wall or corner, 6.5’ to 8.5’ max. (2 x 2.6m, max.)
  • Alarm Output: Normally-Closed Form-A Relay (Form C Option)
  • Contact Ratings: 100mA, 24VDC with internal 10 Ohm current-limiting resistor
  • Power-Supply Requirements: Intended for operation from a power source that provides a 4-hour battery backup in event of power failure
  • Filtered DC: 10.6 to 16VDC nominal with battery backup from control panel
  • Current Drain: 28mA (idle or alarm) at 12VDC (nominal); 33mA (idle or alarm) at 16VDC (nominal)
  • Dimensions: 4.5” x 2.5” x 1.8” (11.4 x 6.4 x 4.6cm) (H x W x D)
  • Shipping Weight: 6 oz. (170.1g)
    		• IQ VISION Advanced PIR with IQ Look
    With its advanced ASIC PIR technology and so many innovative features, the IQ Vision is sure to be a reliable component in any security system, large or small. Among its innovative features is a range of 40’ x 40’, and 30lb. pet immunity, which is great for false alarm protection for small pets, like cats and dogs. The IQ Vision also has a sealed sensor chamber to prevent insects, and dust from interfering with the sensor. With an attractive two-tone bi-optic case, the IQ Vision adds designer appeal to match any location. The IQ Vision will greatly reduce false alarms, and is an asset to any alarm system.
  • 40’ x 40’ (12.2m x 12.2m) range
  • 30lb pet immunity
  • Advanced ASIC PIR technology
  • Attractive two-tone bi-optic case
  • Excellent EMI-/RMI-/lightning protection with resilient SMD circuitry
  • Sealed sensor chamber prevents insect/draft interference
  • Features look-down/creep zone
  • SSP™ (Signal Selective Processing) for the easiest and most stable of installations
  • Auto Temp compensation
  • Advanced, EZ-Aim fresnel lenses for optimum detection performance
  • Conventional wall or corner mounting
  • Tamper supervised
  • Form A relay (Form “C” option)
  • Operating Temperature: 14°F to 122°F (-10°C to +50°C)
  • Traditional Mounting: Wall or corner (hardware supplied)
  • Alarm Output: Normally closed from A relay
  • Contact Ratings: 100ma, 24VDC with internal 10 Ohm current-limiting resistor
  • Power Supply Requirements: Unit is intended to operate from a power source that provides a 4 hr battery backup in the event of a power failure
  • Filtered DC: 10.6 to 16 VDC with a battery back-up from control panel
  • Current Drain: 16 mA @ 12 VDC nominal
  • Dimensions: 4.5” x 2.5” x 1.8” (11.4 x 6.4 x 4.6cm) (H x W x D)
  • Shipping Weight: 6 oz. (170.1g)
    •