|
|
|
|
|
|
|
|
|
The Elk UltraProx Wiegand Reader is a compact, technically advanced external proximity reader with 26 bit Wiegand output for use with a separate controller. Compatible with Elk M1 control panels and most other access controllers. Ideal for higher security installations and as an alternative to remembering PIN codes.
Features: Compatible with ELK M1 controllers (use ELK-W035A wiring harness) Compatible with most access controllers 26-bit Wiegand Output Slimline waterproof housing with epoxy potted electronics User configurable inputs for the onboard buzzer and green LED Compatible with Clamshell Style (Credit Card size) Proximity Cards (ELK-M1PRC) Compatible with Keychain Style Proximity Fobs (ELK-M1PRF) Substitutes for User Code Pin Entry
Specifications: Reader Format: 26 bit Wiegand Operating Voltage: 12 VDC Current Draw: 50 mA. Size: 1.9 W x 3.2" H x .9" D
|
Multipurpose enclosure to house M1EZ8 control. Works well as kit box for power supplies and other peripherals. Box is surface mountable and has knockouts on top, bottom, and sides to accommodate 1/2" conduit. Can be used to house "special projects. Knockouts for 1/2" conduit
Hinged Cover with camlock |
Overall Box:
Metal Gauge:
Color | 12 W x 12 H x 3.5 D
20 gauge.
Appliance White |
|
|
|
|
|
|
|
|
|
|
|
|
|
This special cable is needed for connecting the M1 Gold or M1EZ8 Control to the Computer whenever the Computer does not have a conventional RS-232 9-pin serial port. Most modern laptops and many desktop computers are only equipped with USB ports.
|
For connecting external 26 Bit Weigand proximity reader or keypad to ELK-M1KP or for connecting Caddx Wireless Receiver to M1Gold and M1EZ8.
|
|
|
|
|
|
|
|
|
|
|
|
|
ELK W039A - Cable for connecting external 26 Bit Weigand proximity reader or keypad to ELK-M1KP2
|
ELK W040A - For Connecting M1Gold or M1EZ8 main serial port to the ELK-M1XEP Ethernet Interface
|
|
|
|
|
|
|
|
|
|
|
|
|
Two Way Listen-In Interface for ELK-M1EZ8plus a two-way speaker/microphone (ELK-M1TWS). Adds up to three (3) zones of two way listen-in to M1 Gold Control. This can be used by the Central Station to verify an alarm. Up to 12 microphones (M1TWS) may be connected. INTERFACE FEATURES: -
Adds Listen-in Microphones to the M1EZ8 -
Adds Amplified Talk-back Speaker Output with Adjustable Volume Control -
Powers Microphones and Performs Switching -
Provides 3 Separate Microphone Zones -
Each Listen-in Zone Can Have Up to 4 Mics INTERFACE SPECIFICATIONS: -
Operating Voltage: 12 Volts D.C. -
Speaker (Output) Load: 2 to 16 Ohms -
Current Draw: 50mA to 80mA (depending on load and volume setting) -
Housing Dimensions:
4.375" x 3.0" x 1.125" -
Circuit Board Dimensions: 3.5" x 2.75"
M1 Two Way Speaker/Microphone
FEATURES: SPECIFICATIONS: -
Operating Voltage:
Powered from M1TWI or M1EZ8TWI -
Current Draw. 5mA each -
Speaker Impedance: 8 ohms -
Speaker Rating: 20 Watts Nominal -
Size: 4.25" x 4.25" x 2.13" -
Color: White
|
FEATURES: SPECIFICATIONS: -
Operating Voltage:
Powered from M1TWI or M1EZ8TWI -
Current Draw. 5mA each -
Speaker Impedance: 8 ohms -
Speaker Rating: 20 Watts Nominal -
Size: 4.25" x 4.25" x 2.13" -
Color: White
|
|
|
|
|
|
|
|
|
|
|
|
|
Adds 16 voltage outputs to M1 Gold or M1EZ8 Controls. Provides 2 plug-in, 8-pin flying lead connectors for triggering low current devices (50 mA max. each such as: LEDs, relays, piezos, etc. Operates from 4-wire data bus. Up to 12 Output Expanders may be used for a total of 208 outputs. The voltage outputs can be converted to relays (8 or 16) using (1 or 2) M1RB Relay Board(s). FEATURES: -
16 Voltage Outputs -
Operates on the 4-Wire Data Bus -
DIP Switch Address Settings -
Flash Memory for Firmware Updating -
Two (2) - Twelve (12) Conductor "Flying Lead" Wire Harnesses -
Voltage Outputs may be converted to Relays using M1RB Relay Boards -
Status LED with Diagnostic Display -
Mounts in Enclosure using ELK-SWG Glides, SWP3 Structured Wire Plate, or Double Sided Foam Tape SPECIFICATIONS: -
Outputs: 12 VDC @ 50 mA each -
Wire Harness Length: 12" -
Operating Power Range: 9 to 14 VDC -
Current Draw: 65 mA Nom., 330 mA Max. -
Size: 6" x 3.25" x .75" H
|
The ELK-M1XZW is a radio transceiver interface designed to allow an M1 Controller to interface with Z-Wave enabled devices. Z-Wave technology is a wireless bi-directional communications network consisting of devices such as: Plug-in Dimmer Modules, Wall Mount Switches and Dimmers, Plug-in Appliance Modules, Motion/Occupancy Sensors, and HVAC Thermostats. The M1XZW interface functions as a Z-Wave Secondary Controller OR as a Z-Wave Static Update Controller (SUC) for holding the Z-Wave system setup programming. The interface connects to the M1 RS-485 data bus and is enrolled and identified as a Type 5 Expander. As such, it may be remotely located anywhere along the RS-485 data bus within the maximum stated distance limits. The housing is designed for wall mounting and includes mounting screws and anchors. Z-Wave is a trademark of Zensys, Inc.
M1 Controllers can be programmed to control Z-Wave network devices based on any number of events using the powerful rules engine. These events include, but are not limited to:
-Time
-Alarm System Arm Status
-Status of Alarm System Sensors such as door contact, motion sensors, etc.
-Task Activation
-Sunrise /Sunset Light/Dark
And More...
M1 Controllers can also control Z-wave network devices remotely. The M1Gold Control features a built-in, telephone remote control. With the M1XEP Ethernet Interface, both the M1Gold and M1EZ8 can control Z-Wave enabled devices over the internet, without the need for a dedicated, "24/7" server.
FEATURES: -
Flash Memory for Firmware Updating -
Connects to the M1 Data Bus - RS-485 -
LED Indicators for Status and Programming -
Push Button "Copy" Program Switch -
For Indoor Use Only SPECIFICATIONS: -
Signal (Frequency): 908.42 MHz -
Range: Up to 100 feet (line of sight) to closest Z-Wave enabled product -
Operating Voltage: 12 Volts D.C. -
Operating Temperature Range: 32-105 degrees F
(0 - 40 degrees C) -
Current Draw: approx. 60 mA -
Housing Dimensions: 4.25" x 6.375" x 2.125" -
Circuit Board Dimensions: 2.25" x 3.95"
|
|
|
|
|
|
|
|
|
|
|
|
The ELK-TS07 is a 7" touchscreen that operates with M1 or EZ8 controls. It features a bright TFT display, powerful microprocessor, and built-in ElkRM Remote Management Software to satisfy the most discriminating taste. The easy to use graphical interface is designed to simplify the operation of both automation and security. As a Windows CE device, the TS07 is actually a small computer. It has a CAT5 modular Ethernet port connector on the back which allows it to be connected directly to a LAN (local area network) router/switch. Connection to an ELK-M1 or M1EZ8 Control panel is accomplished by the addition of an ELK-M1XEP Ethernet Interface (separate purchase) which installs between the controls main serial port and the LAN. For ultimate ease of installation, the TS07 features PoE (Power over Ethernet) compliance. All thats needed is a PoE compliant LAN router/switch or a mid span injector device to be able to power the touchscreen directly through the same CAT5 Ethernet cable that connects it to the network! Just think, no more wasted time hunting for a convenient AC outlet or running additional DC power wires! Mid span injectors and router/switches with PoE technology are the latest innovation and can be bought at most computer supply stores. For cases where PoE is not readily available, the TS07 is packaged with a plug-in 110VAC to 12VDC 4 Amp Power Supply. When connected to a LAN that has high speed Internet service, the TS07 is fully capable of internet browsing. Internet Explorer is pre-installed as part of the Windows CE operating system. Think about it, you can surf the web just like a standard PC, and, with the built-in ElkRM software, you can set up "Links" for easy access to frequently visited websites. Out of the box the TS07, with the ElkRM software, allows you to view video imagery from certain brands* of IP accessible cameras and DVR recorders, with no additional hardware to purchase! You can even access up to date information on weather, traffic, stocks, and more! *Supported IP Accessible Cameras and DVR's |
| | FEATURES: -
Dimmable Backlight -
Built-in Microphone and Speaker -
On-board, compact flash memory
socket for expansion -
1 Ethernet 10/100 Port, accepts
Power over Ethernet (PoE),
IEEE 8002af compliant -
1 RS-232 Port -
1 USB "Host" Accessory Port -
Ships with ElkRM Remote
Management Software
SPECIFICATIONS: -
Overall Size: 9.375" W x 7.1" H x .695" D -
Screen Size: 7" Diagonal -
Screen Type: Full TFT, Color, Super
Bright Display -
Resolution: 800 x 480 Wide VGA -
Operating System: Windows CE -
Processor Type: Arm 920 -
Processor Speed: 200mHz -
Memory: 64MB SD RAM, 32 MB Flash -
Bezel color: White |
|
ELK-TS071P 7" LCD Color Touchscreen Total Control at Your Fingertips
Includes Power Injector and Power Splitter (ELK-POE12K)
The ELK-TS071 is an
in-wall mount 7 LCD color touchscreen designed to operate with
the M1Gold and M1EZ8 controls. It features a super bright TFT
display, powerful microprocessor, and includes Elks Remote
Management Software (RMS) The easy to use graphical interface is
designed to simplify the operation of both security and
automation. Its low profile design satisfies the most
discriminating taste.
This touchscreen
connects to an M1Gold or M1EZ8 control over a local network via
its on-board Ethernet port (ELK-M1XEP required to connect the
M1Gold or M1EZ8 control to network). When connected to a LAN that
has high speed internet service, the TS071 is fully capable of
internet browsing. Internet Explorer is pre-installed as part of
the Windows CE operating system.
The RMS software
allows control of many aspects of the system including security,
lighting, climate, outputs, audio etc. The software also permits
viewing of video imagery from certain brands of IP access cameras
and DVRs*, with no additional equipment to purchase! RMS also
allows access to up-to-date weather and traffic information and
provides "Links" for easy access to frequently visited
websites. The TS071 is the
successor to the older TS07 touchscreen and utilizes a smaller
rough opening, [7.5 x 5.38] vs. [8 x 6.31]. A small
quantity of TS07 units are available
while supplies last. IMPORTANT NOTE: The ELK-TS071 cannot be used directly with a POE switch or hub. To power via POE over network cabling, order the
ELK-TS071P which includes a PoE injector and splitter, or purchase the POE injector and splitter separately (ELK-POE12K).
|
|
|
