You are here: Home > Shop Brands > Caddx > Power Modules
We found 11 results matching your criteria.
Sort By:
Page of 1
Caddx 60-679 - Class II Transformer 16.5Vac 50Va Caddx 60-711 - BATTERY ALKALINE 12 VOLT 6 PACK
Caddx 60-679 - Class II Transformer 16.5Vac 50Va Special Order Item Caddx 60-711 - Battery Alkaline 12V 6-Pack
Caddx 60-713 - Battery Replacement 9V Lith. ULtralife Caddx 60-813-09 - BATTERIES 3.6V 1/2 AMP HOUR LITHIUM 9 PACK

Caddx 60-713 - Battery Replacement 9V Lith. ULtralife

3.6VDC Size AA Lithium Battery for Water-Resistant Pendant Panic Sensors and Double/Single-Button Panic Sensors, 9-Pack
Caddx 60-898-ITI - Simon 3 Class Ii Transformer Caddx 60-961 - Power Supply Replacement Kit - Includes Careguard Transformer W/ Molded-In Power Cord and Attached Connectors for Easy Installation

Caddx 60-898-ITI - Simon 3 Class Ii Transformer

Includes a CareGard transformer with molded-in power cord and attached connectors for easy installation. Enables dealers to repair a CareGard with a damaged power cord or transformer.
Caddx 60-972 - Line Carrier (X10) Power Supply Replacement Kit Caddx 600-1019 - SUPERBUS 2000 2 AMP POWER SUPPLY
Includes CareGard Line Carrier Transformer with molded-in power cord. Enables addition of X10 modules that flash lamps during medication reminders and no activity warnings. GE 2 Amp Supervised Power Supply For The Concord 4
Description

The power supply provides an additional 12 VDC, 2 amps (current limited) for Concord 4 system devices and is supervised via the SuperBus� 2000 digital data bus.

Note: For 24 hour backup, external power drain is limited to 95mA (during normal standby conditions) using a 4.5 Ah battery, or 190mA continuous using a 7.0 Ah battery.

The power supply uses a 24 VAC, 50 VA power transformer. In case of an AC power failure, a 12 VDC, 4.5 or 7 Ah backup battery (not included) provides power to connected devices. The battery is tested by the power supply on power up, every two minutes afterward, and whenever the panel tests its own backup battery.

The power supply also includes a hardwire zone input that accepts normally open (NO) or normally closed (NC) intrusion detection devices. The power supply can be located inside the Concord 4/Concord Express V4 cabinet or it can be mounted in a separate Concord Residential Enclosure (444-1700 and 444-1711 ordered as a separate kit) or Concord Commercial Expansion Enclosure (444-1391 ordered as 60-816). See Mounting inside panel cabinet on page 2, Mounting inside Concord residential enclosure on page 2, and Mounting inside Concord Commercial enclosure on page 3 for more information on mounting in a separate enclosure.

For UL installations, the +12V OUT is not fully supervised for open circuits. Therefore, sirens cannot be connected directly to the output. � For large installations with long wire runs, power supply location is important. The total system wiring length (all partitions) for all bus devices connected to a Concord 4/ Concord Express V4 panel must not exceed 4,000 feet. This not only includes the power supply bus and power connections to the panel, but also any bus devices you may connect to the power supply. For example, touchpads and other bus devices in a remote partition should be connected to the power supply rather than running the wires all the way to the panel (Figure 2). Table 1. Maximum +12V OUT wire length Wire Gauge Maximum wire length from power supply +12V OUT terminal 22 100 feet 18 200 feet 16 350 feet 14 550 feet.

Features

  • Ties Into Keypad Bus For Supervision
  • Needs Seperate Transformer And Battery Not Included
  • 24VAC 50VA Transformer Is Required XF2450C Description

    The power supply provides an additional 12 VDC, 2 amps (current limited) for Concord 4 system devices and is supervised via the SuperBus� 2000 digital data bus.

    Note: For 24 hour backup, external power drain is limited to 95mA (during normal standby conditions) using a 4.5 Ah battery, or 190mA continuous using a 7.0 Ah battery.

    The power supply uses a 24 VAC, 50 VA power transformer. In case of an AC power failure, a 12 VDC, 4.5 or 7 Ah backup battery (not included) provides power to connected devices. The battery is tested by the power supply on power up, every two minutes afterward, and whenever the panel tests its own backup battery.

    The power supply also includes a hardwire zone input that accepts normally open (NO) or normally closed (NC) intrusion detection devices. The power supply can be located inside the Concord 4/Concord Express V4 cabinet or it can be mounted in a separate Concord Residential Enclosure (444-1700 and 444-1711 ordered as a separate kit) or Concord Commercial Expansion Enclosure (444-1391 ordered as 60-816). See Mounting inside panel cabinet on page 2, Mounting inside Concord residential enclosure on page 2, and Mounting inside Concord Commercial enclosure on page 3 for more information on mounting in a separate enclosure.

    For UL installations, the +12V OUT is not fully supervised for open circuits. Therefore, sirens cannot be connected directly to the output. � For large installations with long wire runs, power supply location is important. The total system wiring length (all partitions) for all bus devices connected to a Concord 4/ Concord Express V4 panel must not exceed 4,000 feet. This not only includes the power supply bus and power connections to the panel, but also any bus devices you may connect to the power supply. For example, touchpads and other bus devices in a remote partition should be connected to the power supply rather than running the wires all the way to the panel (Figure 2). Table 1. Maximum +12V OUT wire length Wire Gauge Maximum wire length from power supply +12V OUT terminal 22 100 feet 18 200 feet 16 350 feet 14 550 feet.

    Features

    • Ties Into Keypad Bus For Supervision
    • Needs Seperate Transformer And Battery Not Included
    • 24VAC 50VA Transformer Is Required XF2450C
Caddx 600-1024 - TRANSFORMER CLASS 2 16.5 VOLT 40VA WITH LINE CARRIER Caddx 600-1025-01-95R - SB2000 Transceiver, 319.5 MHz SAW

Caddx 600-1024 - TRANSFORMER CLASS 2 16.5 VOLT 40VA WITH LINE CARRIER

Caddx 600-1025-01-95R - SB2000 Transceiver, 319.5 MHz SAW

Caddx 6001029 - TRANSEIVER ENCLOSURE KIT FOR NX448E
Caddx 6001029 - Transceiver Enclosure Kit for NX448E - FOR CANADA USE I9-6001029
   
 
 
 

Enter your email for a chance to WIN $100 Amex Gift Card.

Please Enter Your Email Address

*One entry per household please