You are here: Home > Shop Brands > Caddx > Control Panel
We found 55 results matching your criteria.
Sort By:
Page of 5
Caddx 60-874-95R - ALLEGRO CONTROL PANEL KIT WITH KEYPAD Caddx 600-1040 - Concord 4 Commercial panel
Overview
Allegro is an economical addition to the GE Interlogix family of
security systems. Allegro offers up to 20 zones of burglary and fire
protection. With a built-in keypad and siren that is capable of 85 dB,
Allegro is well-suited for multi-family buildings, such as apartments.
Outstanding
Features

The panel comes standard with 20 zones, one of which can be a
hardwired supervised zone. The built-in radio receiver works with
most Crystal or SAW Learn Mode sensors.
Enhanced
Monitoring

The Dialog Telephone Interface Module (DTIM) is a battery
operated communication link between the control panel and the
central monitoring station. The DTIM receives radio signals from the
panel, then uses the phone line to report security system events to
the central monitoring station.
The DTIM provides added security by separating the telephone
interface from the panel. If the panel is damaged during a break-in or
fire, the DTIM can still report to the central monitoring station.
The DTIM is a supervised device that transmits supervisory signals
every hour for the panel to receive. When the battery is low, the
module transmits a low battery signal.
Effortless
Programming

System programming can be done on-site from the panel using the
built-in keypad, or off-site using ToolBox downloader software
(version 5.7 and later).

Standard Features
  • One supervised hardwire zone
  • Up to 20 sensors
  • Supports Crystal and SAW Learn Mode sensors
  • 4 user programmable access codes
  • SIA or CID central station reporting formats
  • Event buffer with time and date stamp
  • Built-in radio receiver/transmitter
  • Built-in siren capable of 85 dB @ 3 m
  • Built-in panel keypad
  • Liquid Crystal Display (LCD)
  • On-site or remote programming
  • Concord 4 is a full-featured security system for intrusion and fire detection that complies with false alarm standards. Easy to install and simple to use, Concord’s modular design and advanced software provide outstanding system flexibility to meet the needs of virtually any residential or commercial security application. The panel comes with eight hardwire zone inputs, including a 2-wire smoke detector loop that can handle up to 20 detectors. A built-in RF receiver with 96-zone capacity provides instant compatibilty with the complete line of GE Security Learn Mode sensors. Two programmable outputs can be set up to activate external devices during an alarm or other system event.

    Standard Features


    • Six partitions and eight built-in hardwire zones—96 zones maximum as either hardwire, wireless, or combination
    • Two onboard programmable outputs
    • Compatible with GE Security crystal and
    • SAW Learn Mode sensors
    • SIA CP-01 False Alarm Reduction Standard compliant
    • 2- and 4-wire smoke detector compatibility
    • Panel auxiliary power provides 1A
    • Built-in 12-watt siren driver
    • 230 access codes with programmable authority levels
    • Latchkey numeric paging with optional keychain touchpad activation
    • Audio verification in partition 1 with VOX mode (requires Interrogator® 2000)
    • 250-event history buffer viewable from any alphanumeric keypad, Downloader, or automation device
    • Keyswitch arming using a hardwire or wireless zone

    Caddx 80-518 - F01 STARTER PACKAGE WITH KEYPADS Caddx NX-4 - 4 to 8 zone Control Panel (NX4)


    Concord Express provides integrated hardwire/wireless security, delivering up to 24 zones of burglary and fire protection. For residential buyers - both old and new construction - Concord Express is an important and affordable security choice. Its modular design provides elasticity for creating personal system plans. Concord Express is install-friendly, even easier to actually use, and complies strictly with SIA False Alarm Standards

    The Standard Kit Includes:

    • Express Alarm Panel
    • Integrated 16 Zone Wireless Receiver
    • LCD Alpha-Numeric 2x16 Touchpad
    • Transformer
    • Installation & Programming Guide

    High Standards:
    Typical configuration of Concord Express includes 6 hardwired zone inputs, one built-in radio receiver with 16 wireless zone capacity and 2 programmable outputs. Of the hardwire zones, one can be used as a 2-wire smoke detector loop for up to as many as 10 detectors. The 16 included built-in wireless zones allow for easy and cost-efficient addition of wireless panics and remote keychain touchpads. Integrated wireless provides installation versatility to match the neccessities of your customers and your installers. The integral outputs can be programmed to energize external devices during an alarm or other system procedures. Encrypted Learn Mode technology secures every single keychain touchpad transmission.

    Easy Expansion:
    SnapCards™ bring the system's hardwire zone input and output capabilities a level higher. The 8Z Hardwire Input SnapCard allows for 6 regular hardwire zones and 2 two-wire smoke loops. The 4Z/2 Output SnapCard adds another four regular hardwire inputs and also 2 programmable output relays. Connecting easily to the panel circuit board inside the cabinet for a clutter-free, professional installation, each panel has one card to make the connection.

    Advanced Features:
    With 16 owner-programmable access codes, residential customers can give liberal access privileges to seperate users. Numeric paging notify users about latchkey and system status.

    Effortless Programming:
    Run through fast and easy on-site programming with alphanumeric touchpads and even a menudriven text interface with shortcut menu numbers.

    Features

    • 6 hardwire and 16 standard wireless zones; can use up to 24 zones in any wireless or hardwired setup
    • Twin onboard programmable outputs
    • 4- and 2- wire smoke detector compatibility
    • Compatable with all wireless ITI Learn Mode™ sensors
    • 16 user-programmable access codes with authority level recognition
    • Has latchkey numeric paging
    • 50-event remenbrance history buffer
    • False Alarm SIA Reduction features

    Specifications
    Color: Belgian Gray
    Dimensions: 9.0" wide, 11.0" high, 3.0" deep
    Power Supply: Class II, 16.5 VAC, 25 VA, 60 Hz
    Auxiliary Power Output: 750 mA continuous power; 1.25 amps at alarm output
    Installation: Wall mounting
    Programming: SuperBus 2000 Alphanumeric Touchpads.
    Reporting: SIA Digital II or Contact ID
    Compatibility: All ITI Learn Mode crystal and SAW sensors

    The NX-4 brings sophisticated security with an economical appeal to the NetworX family of control/communicators. Capable of supporting virtually any of the powerful expander modules from the NetworX family, the NX-4 expands the universe of options available to the smaller system user.

    Features:

    • 4 fully programmed zones
    • Zone doubling options
    • Hardwire/wireless hybrid
    • All zones programmable as fire and burglary
    • 20 customizable pre-configured zone types
    • 8 user codes
    • 1 duress code
    • Up/downloadable with competitor lockout
    • Modular design with slide in PC boards
    • Swinger shutdown
    • Siren supervision
    • Automatic arming with auto retry
    • Fire alarm verification
    Caddx NX-4-BO-FG - NX4 PANEL BOARD ONLY Caddx NX-4-FP - NX-4 Fastpack With NX-1308E Keypad

    Caddx NX-4-BO-FG - NX4 PANEL BOARD ONLY

    The NetworX NX-4 is a feature-rich, entry level security system. The NX-4 uses advanced technology for burglary, fire and environmental detection without the high cost of similar controls.

    Standard Features


    • Flash memory microprocessor
    • Expanded event log
    • Early open/late close reporting
    • Programmable loop response
    • Full data reporting
    • Expandable to 8 fully programmable hardwire and/or wireless zones
    • Maximum of 8 keypads
    • 8 user codes
    • 512-event history log that p
    Caddx NX-4-FP-LM - NX-4 Fastpack With NX-1308E Keypad Less Motion Sensor Caddx NX-4-KIT-4 - NX-4 Kit With NX-1308E Keypad & Transformer
    The NetworX NX-4 is a feature-rich, entry level security system. The NX-4 uses advanced technology for burglary, fire and environmental detection without the high cost of similar controls.

    Standard Features


    • Expandable to 8 fully programmable hardwire and/or wireless zones
    • Maximum of 8 keypads with 1 partition
    • Eight user codes
    • 185-event history log that provides date, time, event and user number
    • Wireless technology with up to 8 supervised zones
    • Hardwire expan

    The NetworX NX-4 is a feature-rich, entry level security system. The NX-4 uses advanced technology for burglary, fire and environmental detection without the high cost of similar controls.

    Standard Features


    • Expandable to 8 fully programmable hardwire and/or wireless zones
    • Maximum of 8 keypads with 1 partition
    • Eight user codes
    • 185-event history log that provides date, time, event and user number
    • Wireless technology with up to 8 supervised zones
    • Hardwire expansion up to 8 zones

    Caddx NX-4-KIT-7 - NX-4 Kit With NX-148E Keypad & Transformer Caddx NX-4-KIT-7-RF - NX-4 Kit With NX-148E-RF LCD Keypad, T-0001 Transformer.
    The NetworX NX-4 is a feature-rich, entry level security system. The NX-4 uses advanced technology for burglary, fire and environmental detection without the high cost of similar controls.

    Standard Features


    • Expandable to 8 fully programmable hardwire and/or wireless zones
    • Maximum of 8 keypads with 1 partition
    • Eight user codes
    • 185-event history log that provides date, time, event and user number
    • Wireless technology with up to 8 supervised zones
    • Hardwire expansion up to 8 zones

    The NetworX NX-4 is a feature-rich, entry level security system. The NX-4 uses advanced technology for burglary, fire and environmental detection without the high cost of similar controls.

    Standard Features


    • Expandable to 8 fully programmable hardwire and/or wireless zones
    • Maximum of 8 keypads with 1 partition
    • Eight user codes
    • 185-event history log that provides date, time, event and user number
    • Wireless technology with up to 8 supervised zones
    • Hardwire expansion up to 8 zones

    Caddx NX-4-KIT-8 - NX-4 Kit With NX-1448E Keypad & Transformer Caddx NX-4-KIT-APT - NX-4 Kit With Apartment Software
    The NetworX NX-4 is a feature-rich, entry level security system. The NX-4 uses advanced technology for burglary, fire and environmental detection without the high cost of similar controls.

    Standard Features


    • Expandable to 8 fully programmable hardwire and/or wireless zones
    • Maximum of 8 keypads with 1 partition
    • Eight user codes
    • 185-event history log that provides date, time, event and user number
    • Wireless technology with up to 8 supervised zones
    • Hardwire expansion up to 8 zones

    The NetworX NX-4 is a feature-rich, entry level security system. The NX-4 uses advanced technology for burglary, fire and environmental detection without the high cost of similar controls.

    Standard Features


    • Flash memory microprocessor
    • Expanded event log
    • Early open/late close reporting
    • Programmable loop response
    • Full data reporting
    • Expandable to 8 fully programmable hardwire and/or wireless zones
    • Maximum of 8 keypads
    • 8 user codes
    • 512-event history log that pr
       
     
     
     

    Enter your email for a chance to WIN $100 Amex Gift Card.

    Please Enter Your Email Address

    *One entry per household please