You are here: Home > Shop Brands > Visonic > Transmitters
We found 33 results matching your criteria.
Sort By:
Page of 3
USP US-90SPBR Micro Magnetic Contact (Brown) USP US-90SPGY Micro Magnetic Contact (Gray)

Micro Magnetic Contact

  • 1"x1/4"x3/16"
  • Closed circuit
  • .6" gap
  • Brown
  • Micro Magnetic Contact

  • 1"x1/4"x3/16"
  • Closed circuit
  • .6" gap
  • Gray
  • USP US-90SPWH Micro Magnetic Contact (White) Visonic  MCT-211 Waterproof PowerCodeâ„¢ Wrist Transmitter

    Micro Magnetic Contact

  • 1"x1/4"x3/16"
  • Closed circuit
  • .6" gap
  • White
  • The MCT-211 is a PowerCode™ miniature waterproof wrist-worn transmitter, designed for personal emergency signaling and other applications where the transmitter needs to be within easy reach at all times.

    The transmitter is waterproof and suitable for wearing even in a shower or in other wet environments such as factories, hospitals, gardens, pools and rain conditions. Attractive ergonomic design makes the MCT-211 as convenient to wear on a regular basis as any wristwatch.

    When a button is pressed and transmission is initiated, the MCT-transmits a unique, factory programmed, 24-bit digital alarm code. This code is randomly selected from 16 million possible codes and is therefore unique and virtually impossible to accidentally reproduce.

    The MCT-211 uses a coin-type 3-Volt long life lithium battery. To ensure continuous reliable operation, when the battery charge is low, an LED lights during transmission and a low-battery alert is sent to the target receiver.

    The MCT-211 is compatible with PowerMax™ and all Visonic PowerCode™ wireless panels and receivers. It supports various frequency bands according to international standards, and is approved for use in most countries.

    MCT-211 Features:
  • Easy to wear as a wristband.
  • Superior transmission range.
  • Attractive, comfortable, ergonomic, waterproof design.
  • PowerCode™ ID factory-selected from 16 million possible combinations.
  • 3 Volt coin-type lithium battery.
  • Visible and transmitted low battery indications.
  • Available in several optional frequencies in compliance with international standards.
  • Compatible with PowerMax™ and all Visonic PowerCode™ wireless panels and receivers.
  • Visonic 09912A Replacement Battery 12V for MCT201/MCT201WP Visonic 09912M POWERMAX PLUS Rechargeable Battery Pack of 6
    Visonic 09912A Replacement Battery 12V for MCT201/MCT201WP Visonic 09912M POWERMAX PLUS Rechargeable Battery Pack of 6
    Visonic AMBER-NAE Control Panel and Waterproof Wristband/Pendant Transmitter English. Visonic AMBER-NAF Control Panel and Waterproof Wristband/Pendant transmitter French
    AMBERNAE Control Panel and Waterproof Wristband/Pendant Transmitter - English. AMBERNAF Control Panel and Waterproof Wristband/Pendant transmitter - French
    Visonic AMBER-NAS Control Panel and Waterproof Wristband/Pendant Transmitter Spanish VISONIC MCT-100 Powercode Universal Transmitter With 2 Inputs - VISONIC MCT100
    AMBERNAS Control Panel and Waterproof Wristband/Pendant Transmitter - Spanish. VISONIC MCT-100 Powercode Universal Transmitter With 2 Inputs - VISONIC MCT100


    The MCT-100 is a fully supervised, two-input PowerCode™ wireless transmitter designed for protecting doors, windows or other objects and for use in a variety of security and control applications. This highly reliable top-performance wireless device is easy to install and operate in a wide range of residential and commercial environments
    The MCT-100 transmitter is compatible with virtually any normally open (NO) or normally closed (NC) device connected to its two end-of-line (EOL) protected inputs: pushbuttons, sensors, contacts, switches and other detection devices
    When activated, each input initiates an individual 24-bit PowerCode™ ID message, which identifies it to the target receiver as a separate transmitter. Each ID code is randomly selected from 16 million possible combinations, and is therefore unique and virtually impossible to accidentally reproduce. A smart anti-collision algorithm prevents signal jamming by simultaneous transmission from multiple devices. Periodic transmission of supervision signals is used to confirm system connectivity at all times. This unique universal device is available in several optional frequencies in compliance with European, U.S. and other international standards. It is powered by a standard long-life lithium battery, which is constantly monitored, with automatic reporting to the receiver when the battery needs to be replaced

    VISONIC MCT-201 WP Powercode Waterproof Pendant Transmitter - VISONIC MCT201WP VISONIC MCT-234 Powercode Four Button Keyfob For Powermax - VISONIC MCT234
    VISONIC MCT-201 WP Powercode Waterproof Pendant Transmitter - VISONIC MCT201WP


    The MCT-201WP is a miniature pendent PowerCode™ wireless transmitter designed for emergency and control applications in wireless security systems, and home automation and remote control systems. Fully water-resistant, the pendant is suitable for operation in wet environments such as factories, hospitals, gardens, rain conditions, etc
    When activated, the MCT-201WP initiates a PowerCode™ transmission sequence of a 24-bit ID command code, which is selected from 16 million possible combinations and is therefore unique and virtually impossible to accidentally reproduce. A smart anti-collision algorithm prevents signal jamming by simultaneous transmission from multiple devices
    This comfortable, attractive miniature pendent is available in several optional frequencies in compliance with European, U.S. and other international standards. It is powered by a standard long-life Lithium battery, and features visible and transmitted low battery indications when the battery needs to be replaced. For maximum wearing flexibility, the MCT-201WP pendant is supplied with a neck-chain and a key-ring clip

    VISONIC MCT-234 Powercode Four Button Keyfob For Powermax - VISONIC MCT234


    The MCT-234 is a 4-button miniature wireless CodeSecure™ keyfob transmitter designed for arming and disarming of wireless security systems, and for emergency signaling, access control, home automation and remote control applications
    When activated, each button initiates a CodeSecure™ transmission of a unique 28-bit (rolling code) ID command, selected from over 100 million possible combinations. To prevent "code grabbing" by potential intruders trying to defeat the security system, the next time the button is activated, the transmitter sends out a different CodeSecure™ ID, which is selected by a proprietary code encryption algorithm and which can be recognized only by the target receiver
    This attractive miniature keyfob is available in several optional frequencies in compliance with European, U.S and other international standards. It is powered by a standard alkaline battery and features visible and transmitted low battery indications when the battery needs to be replaced

       
     
     
     

    Enter your email for a chance to WIN $100 Amex Gift Card.

    Please Enter Your Email Address

    *One entry per household please