|
ACTi 's new entry level 1-channel video decoder, ACD-3100 is equipped with newly developed SoC (System on Chip). The advantages of ACD-3100 includes shorter video latency, less video jitter, shorter time in switching channels by URL command, support of Multi-Channel connect UI, lower operating temperature, less power consumption, and support of Two-Way Audio. Main Features Full D1 MPEG-4 video decoding at 30/25 FPS Digital time code retrieved Two way audio supported Hardware motion detection, Digital Input / Output
Video
Decompression MPEG-4 ASP, SP decompresssion
Picture Resolution Full D1 (720x480 in NTSC, 720x576 in PAL)
Bit Rate 28 K ~ 3 M bps
Image Frame Rate 30 fps at full D1 resolution (NTSC);
25 fps at full D1 resolution (PAL)
Video Output
CVBS, 1.0Vp-p with 75 Ω loading, BNC
connector;
Y/C, 1.0Vp-p with 75 Ω loading/0.286Vp-p
with 75 Ω loading, S connector
Audio Input
Compression 8kHz, Mono, PCM
Audio Line Input Unbalanced, 1.4 Vp-p, 1Vrms, 3.5 mm
Phone Jack
Audio Output
Compression 8kHz, Mono, PCM
Audio Line Output Unbalanced, 1.4 Vp-p, 1Vrms, 3.5 mm
Phone Jack
Alarm
Input 2, TTL, terminal block
Output 2, TTL, terminal block
Remote Control
Serial Port
RS-485: half duplex, terminal block
RS-422: full duplex, terminal block
RS-232: full duplex, terminal block
External I/O
Reset Button Factory default
LED System status
Network
Ethernet Port Ethernet (10/100Base-T), RJ-45 connector
Protocol TCP, UDP, IP, HTTP, DHCP, PPPoE, RTP,
RTSP, DNS, DDNS, ICMP, ARP
Software
Web Browser Microsoft Internet Explorer 6.0 or above
SDK URL command
Security Password protection: confi gured by the
administrator
Operating
Temperature 0 ºC ~ 50 ºC (32 ºF ~ 122 ºF)
Power
Power Requirement DC 12 V ±10%
Power Consumption 3.8 W
Physical
Dimensions 112 mm x 37.2 mm x 119 mm
(4.41” x 1.46” x 4.68”)
Weight 350 g (0.66 lb)
|
The SED-3300/SED-3320 is a high resolution, Ethernet (LAN and WAN) ready digital video transcoder with bi-directional audio supported(SED-3320). Via an Ethernet network such as LAN or WAN, the SED-3300/SED-3320 takes a MPEG-4 stream from a specific ACTi IP camera or video server, and converts it in real-time with high quality analog video signals and audio signals. This allows analog video devices such as TV system, analog monitors or existing analog video switches to be connected to an ACTi IP-base video system. Main Features: - Up to full D1 MPEG-4 Video decoding at 30/25 FPS
- QoS enabled (L3) video streaming
- Dual MPEG-4 video stream input via LAN or WAN (PPPoE supported) ports at the same time
- Digital time code retrieved
- Analog image decoded from up to 16 different ACTi devices can be displayed or set for patrol
- Bi-directional audio supported
Compression: MPEG-4 ASP decoding
Picture Resolution: Full D1 (720 x 480 in NTSC, 720 x 576 in PAL); CIF (352 x 240 in NTSC, 352 x 288 in PAL)
Image Frame Rate: 30 fps at full D1 resolution (NTSC); 25 fps at full D1 resolution (PAL)
Composite Output: CVBS, 1.0Vp-p with 75 Ω loading, BNC connector;
Y/C, 1.0Vp-p with 75 Ω loading/0.286Vp-p with 75 Ω loading, S connector
Compression: 8 kHz, Mono, PCM
Audio Line Input: Unbalanced, 1.4 Vp-p, 1Vrms, 3.5 mm Jack
Compression: 8 kHz, Mono, PCM
Audio Line Output: Unbalanced, 1.4Vp-p, 1Vrms, 3.5 mm Jack
Input: 2, TTL, terminal block
Output: 2, TTL, terminal block
Serial Port: RS-485: half duplex, terminal block; RS-422: full duplex, terminal block; RS-232: full duplex, terminal block
Reset Button: Factory default
LED: System status
LAN Port: Ethernet(10/100 Base-T), RJ-45 connector
WAN Port: Ethernet(10/100 Base-T), RJ-45 connector
Protocol: TCP, UDP, IP, HTTP, DHCP, PPPoE, RTP, RTSP, FTP, SMTP
Web Browser: Microsoft Internet Explorer 6.0 or above
SDK: ActiveX control, C SDK
Security: Password Protection : configured by the administrator
Temperature: 5 ~ 50 °C (40 ~ 122 °F)
Power Requirement: DC 12 V ±10%
Power Consumption: 7.5 W
Dimensions (WxHxD): 112 mm x 37.2 mm x 119 mm (4.41” x 1.46” x 4.68”)
Weight-Net: 350 g (0.66lb)
|
