You are here: Home > Shop Brands > Camden Door Controls > Door Activation Devices > Mounting Options /Enclosures > Mounting Posts
We found 4 results matching your criteria.
Sort By:
Page of 1
Camden CM-42BSUBRZ (CM-42-BSU-BRZ) Dark Bronze, Single Gang Prep Mounting Post Camden CM-42BSUCLR (CM-42-BSU-CLR) Single Gang Switch Prep Mounting Post - Clear Anodized Finish

CM-42-BSU-BRZ Dark Bronze, Single Gang Prep Mounting Post

CAMDEN DOOR CONTROLS CM-42 Series mounting posts are extremely rugged bollards designed for mounting push switches, keypads, card readers or other door activation devices. Constructed of thick-walled 6" square anodized aluminum, the posts will accommodate any size Camden switch or keypad. The assembly includes an acrylic post cap, which permits clear radio frequency (RF) transmission, or the switch may be hard-wired through the sturdy steel base. The post may also be secured using the optional in-ground mounting base.

Camden mounting posts offer a superior method of mounting a switch, keypad, card reader, or other door activation device, when mounting adjacent to the door is difficult or unsuitable. The various preps allow for use with virtually any switch or door activation device. Available in two anodized colors or mill finish to blend with any décor. The mounting post has provisions to be hard-wired, or for wireless operation utilizing Camden radio controls.

All mounting posts are complete ready-to-install assemblies and include weather resistant fasteners and instructions. Shipping weight is 20 lbs. (9.14 kg).

  • Supplied with acrylic cap and stainless steel mounting hardware
  • Designed for use with RF controls
  • Optional in-ground mounting base
  • Clear aluminum, dark bronze, or mill finish
  • Single gang cut-out is standard.  No cut-out is also available.
  • CM-42-BSU-CLR Single Gang Switch Prep Mounting Post - Clear Anodized Finish

    CAMDEN DOOR CONTROLS CM-42 Series mounting posts are extremely rugged bollards designed for mounting push switches, keypads, card readers or other door activation devices. Constructed of thick-walled 6" square anodized aluminum, the posts will accommodate any size Camden switch or keypad. The assembly includes an acrylic post cap, which permits clear radio frequency (RF) transmission, or the switch may be hard-wired through the sturdy steel base. The post may also be secured using the optional in-ground mounting base.

    Camden mounting posts offer a superior method of mounting a switch, keypad, card reader, or other door activation device, when mounting adjacent to the door is difficult or unsuitable. The various preps allow for use with virtually any switch or door activation device. Available in two anodized colors or mill finish to blend with any décor. The mounting post has provisions to be hard-wired, or for wireless operation utilizing Camden radio controls.

    All mounting posts are complete ready-to-install assemblies and include weather resistant fasteners and instructions. Shipping weight is 20 lbs. (9.14 kg).

  • Supplied with acrylic cap and stainless steel mounting hardware
  • Designed for use with RF controls
  • Optional in-ground mounting base
  • Clear aluminum, dark bronze, or mill finish
  • Single gang cut-out is standard.  No cut-out is also available.
  • Camden CM-42CSUCLR (CM-42-CSU-CLR) No Switch Prep Mounting Post - Clear Anodized Finish Camden CM-42IG (CM-42-IG) In-Ground Base with Rebar Mounting Post

    CM-42-CSU-CLR No Switch Prep Mounting Post - Clear Anodized Finish

    CAMDEN DOOR CONTROLS CM-42 Series mounting posts are extremely rugged bollards designed for mounting push switches, keypads, card readers or other door activation devices. Constructed of thick-walled 6" square anodized aluminum, the posts will accommodate any size Camden switch or keypad. The assembly includes an acrylic post cap, which permits clear radio frequency (RF) transmission, or the switch may be hard-wired through the sturdy steel base. The post may also be secured using the optional in-ground mounting base.

    Camden mounting posts offer a superior method of mounting a switch, keypad, card reader, or other door activation device, when mounting adjacent to the door is difficult or unsuitable. The various preps allow for use with virtually any switch or door activation device. Available in two anodized colors or mill finish to blend with any décor. The mounting post has provisions to be hard-wired, or for wireless operation utilizing Camden radio controls.

    All mounting posts are complete ready-to-install assemblies and include weather resistant fasteners and instructions. Shipping weight is 20 lbs. (9.14 kg).

  • Supplied with acrylic cap and stainless steel mounting hardware
  • Designed for use with RF controls
  • Optional in-ground mounting base
  • Clear aluminum, dark bronze, or mill finish
  • Single gang cut-out is standard.  No cut-out is also available.
  • CM-42-IG In-Ground Base with Rebar Mounting Post

    CAMDEN DOOR CONTROLS CM-42 Series mounting posts are extremely rugged bollards designed for mounting push switches, keypads, card readers or other door activation devices. Constructed of thick-walled 6" square anodized aluminum, the posts will accommodate any size Camden switch or keypad. The assembly includes an acrylic post cap, which permits clear radio frequency (RF) transmission, or the switch may be hard-wired through the sturdy steel base. The post may also be secured using the optional in-ground mounting base.

    Camden mounting posts offer a superior method of mounting a switch, keypad, card reader, or other door activation device, when mounting adjacent to the door is difficult or unsuitable. The various preps allow for use with virtually any switch or door activation device. Available in two anodized colors or mill finish to blend with any décor. The mounting post has provisions to be hard-wired, or for wireless operation utilizing Camden radio controls.

    All mounting posts are complete ready-to-install assemblies and include weather resistant fasteners and instructions. Shipping weight is 20 lbs. (9.14 kg).

  • Supplied with acrylic cap and stainless steel mounting hardware
  • Designed for use with RF controls
  • Optional in-ground mounting base
  • Clear aluminum, dark bronze, or mill finish
  • Single gang cut-out is standard.  No cut-out is also available.
  •    
     
     
     

    Enter your email for a chance to WIN $100 Amex Gift Card.

    Please Enter Your Email Address

    *One entry per household please