You are here: Home > Shop Brands > Keri Systems Inc. > NXT & Doors NetXtreme
We found 9 results matching your criteria.
Sort By:
Page of 1
Keri Systems Inc.  NXT-4D  A 4-Door Access Controller 05350-001 Keri Systems Inc.  NXT-4DNE  A 4-Door Access Controller 05350-001
The NXT-4D Xtreme 4 Door Controller is built for todays IT environments. With all Ethernet functionality built directly into the controller, Keris proprietary MAC address allows for reliable hardware discovery and true 1 button autoconfiguration.

Networking between NXT-4D controllers and/or its sister NXT-2D Xtreme 2 Door Controller also utilize peer to peer Ethernet standards. The NXT-4D is designed to be extremely intelligent with little reliance on network traffic for decision making allowing it to be extremely thrifty with any networks valuable bandwidth.

To expand the systems capabilities, up to four companion 4 x 4 Input/Output boards (NXT-4X4) can be added - one to each of the controllers RS-485 trunks (busses). Customers can choose between Keris new line of highly secure, 4-wire NXT Proximity Readers with reader supervision, and any reader with a standard Wiegand output or Keris MS Series Proximity Readers via the NXT-RM Reader Interface Module.

To manage the system, Doors NetXtreme software has much of the same look and feel as Keris acclaimed original DoorsTM software, but with the added functionality of Client/Server architecture.

Features

  • 4 Door Controller for Keris Doors NetXtreme product line
  • On-board TCP/IP - no network adapters required
  • Ethernet (TCP/IP) network architecture between controllers (true peer-to-peer) and to Host Server
  • Utilize existing LAN/WAN/Ethernet or pull your own dedicated CAT-5 Network
  • Embedded MAC Address for One button AutoConfiguration
  • Built-In Tamper Input
  • Standard 4 PIN Block and RJ Jack built-in for network connection
  • Re-assignable Inputs and Outputs
  • Flash Memory for easy firmware upgrades
  • Up to 256 Controllers (1024 doors) and 4096 auxiliary I/O points per network
  • 50,000 Cardholders, 10,000 Selectable Event Buffer per controller
  • Locking Metal Enclosure (optional without)
  • 96 Bit Encryption
  • The NXT-4DNE Xtreme 4 Door Controller is built for todays IT environments. With all Ethernet functionality built directly into the controller, Keris proprietary MAC address allows for reliable hardware discovery and true 1 button autoconfiguration.

    Networking between NXT-4DNE controllers and/or its sister NXT-2D Xtreme 2 Door Controller also utilize peer to peer Ethernet standards. The NXT-4DNE is designed to be extremely intelligent with little reliance on network traffic for decision making allowing it to be extremely thrifty with any networks valuable bandwidth.

    To expand the systems capabilities, up to four companion 4 x 4 Input/Output boards (NXT-4X4) can be added - one to each of the controllers RS-485 trunks (busses). Customers can choose between Keris new line of highly secure, 4-wire NXT Proximity Readers with reader supervision, and any reader with a standard Wiegand output or Keris MS Series Proximity Readers via the NXT-RM Reader Interface Module.

    To manage the system, Doors NetXtreme software has much of the same look and feel as Keris acclaimed original DoorsTM software, but with the added functionality of Client/Server architecture.

    Features

  • 4 Door Controller for Keris Doors NetXtreme product line
  • On-board TCP/IP - no network adapters required
  • Ethernet (TCP/IP) network architecture between controllers (true peer-to-peer) and to Host Server
  • Utilize existing LAN/WAN/Ethernet or pull your own dedicated CAT-5 Network
  • Embedded MAC Address for One button AutoConfiguration
  • Built-In Tamper Input
  • Standard 4 PIN Block and RJ Jack built-in for network connection
  • Re-assignable Inputs and Outputs
  • Flash Memory for easy firmware upgrades
  • Up to 256 Controllers (1024 doors) and 4096 auxiliary I/O points per network
  • 50,000 Cardholders, 10,000 Selectable Event Buffer per controller
  • Locking Metal Enclosure (optional without)
  • 96 Bit Encryption
  • Keri Systems Inc. NXT-2D - 2 Door Controller Keri Systems Inc. NXT-4x4 - I/O  Local Door Control Module
    The NXT-2D Xtreme 2 Door Controller is built for todayís IT environments. With all Ethernet functionality built directly into the controller, Keriís proprietary MAC address allows for reliable hardware discovery and true 1 button autoconfiguration.

    Networking between NXT-2D controllers and/or its sister NXT-4D Xtreme 4 Door Controller also utilize peer to peer Ethernet standards. The NXT-2D is designed to be extremely intelligent with little reliance on network traffic for decision making allowing it to be extremely thrifty with any networkís valuable bandwidth.

    To expand the systemís capabilities, up to four companion 4 x 4 Input/Output boards (NXT-4X4) can be added - one to each of the controllerís RS-485 trunks (busses). Customers can choose between Keriís new line of highly secure, 4-wire NXT Proximity Readers with reader supervision, and any reader with a standard Wiegand output or Keriís MS Series Proximity Readers via the NXT-RM Reader Interface Module.

    To manage the system, Doors NetXtreme software has much of the same look and feel as Keriís acclaimed original DoorsTM software, but with the added functionality of Client/Server architecture.

    Features

  • 2 Door Controller for Keriís Doors NetXtreme product line
  • On-board TCP/IP - no network adapters required
  • Ethernet (TCP/IP) network architecture between controllers (true peer-to-peer) and to Host Server
  • Utilize existing LAN/WAN/Ethernet or pull your own dedicated CAT-5 Network
  • Embedded MAC Address for one button Auto-Configuration
  • Standard 4 PIN Block and RJ Jack built-in for network connection
  • Re-assignable Inputs and Outputs
  • Flash Memory for easy firmware upgrades
  • Quick Disconnect Connectors
  • Flash Memory for easy firmware upgrades
  • Up to 256 Controllers (1024 doors) and 4096 auxiliary I/O points per network
  • 50,000 Cardholders, 10,000 Selectable Event Buffer per controller
  • Built-In Tamper Input
  • Locking Metal Enclosure (optional without)
  • The NXT-4X4 Input/Output Expansion Module provides functionality to any Doors NetXtreme access control system by adding auxiliary I/O that can be used for additional access control functionality, monitoring non-reader doors or other devices, and creating powerful action sequences by linking input triggers to outputs.

    The module can be connected anywhere along the RS-485 trunk, most commonly at the controller or near a reader. One module can be added per trunk, allowing up to an extra 8 inputs and 8 outputs on an NXT-2D Controller and an extra 16 inputs and outputs on an NXT-4D controller.

    The moduleís relays are re-assignable and interchangeable with the main controllerís relays. The module can be mounted next to the door providing local door control and local door alarm functions while minimizing the cable bundle from door to controller. The unit also has a port to plug in a reader interface module (NXT-RMX) to allow Keri MS reader signals to be sent down the RS-485 line.

    Features

  • 4 auxiliary Inputs and 4 auxiliary Outputs per module
  • Up to 4 modules (16 Inputs and Outputs) can be added per NXT-4D, up to 2 modules (8 Inputs and Outputs) per NXT-2D
  • Re-assignable/Interchangeable with controllerís door I/O
  • 4-State Supervision on Inputs
  • Can be used for Door Forced and Door Held Open Alarms as well as Auxiliary REX Inputs,
  • Latch Integrity, Bond Sensor or other general purpose functions
  • Flash Memory for easy upgrades
  • Powered from Controller
  • Status Indicator LEDs for power, communication, and relay position
  • Dedicated Tamper Input
  • Quick Disconnect Connectors
  • Locking Metal Enclosure (optional without)
  • Keri Systems Inc. NXTADD NETXTREME Additional Client/Server - Each Add'l License Keri Systems Inc. NXTBADGE Badging Software & License for NXT Platform
    Keri Systems Inc. NXTADD NETXTREME Additional Client/Server - Each Add'l License Keri Systems Inc. NXTBADGE Badging Software & License for NXT Platform
    Keri Systems KPS-5-1 KPS51 12VDC 2.5Amp Power Supply With Enclosure -  KF-KPS51 Keri Systems NXT-RM3 - Reader Interface Module
    Keri Systems KPS-5-1 KPS51 12VDC 2.5Amp Power Supply With Enclosure -  KF-KPS51 Interface for Keri MS series and 26-bit Wiegand readers on NXT controller.
    The PSK-3 is a member of Keri's Pyramid Series Proximity line of OEM readers, cards, and tags for access control.

    The PSK-3 is one of the one of the smallest, most durable proximity credentials available. Designed to be carried on a key ring, the PSK-3 is permanently marked with a date code and ID number, includes a brass eyelet for added strength, and is backed by a lifetime warranty - all at a very competitive price.

    The PSK-3 is available with standard sequential encoding, and can be programmed in any custom Wiegand format, as well as industry standard 26-bit Wiegand.

    Users have found the PSK-3 especially convenient for building entrances where the user still has their car keys in hand. If the system has many interior doors that are secured with Keri Pyramid Series proximity readers, users often attach the tag to a necklace for easy carrying, especially if their clothing does not have pockets.

    Within the Pyramid Series Proximity line, the PSK-3 may be used interchangeably with any other Keri credential or reader, including the P-300 Cascade Reader, the P-400 Gibraltar Reader, the P-500 Alps Reader, and the P-600 Rocky Reader and Keypad. The Pyramid Series readers are all single piece design, offer lifetime warranties and industry standard Wiegand or magnetic stripe interfaces, and feature potted weather and vandal resistant construction, as well as optional HID compatibility.
       
     
     
     

    Enter your email for a chance to WIN $100 Amex Gift Card.

    Please Enter Your Email Address

    *One entry per household please