You are here: Home > Shop Brands > On-Q / Legrand > Entertainment Products > Home Enhanced Video Modules
We found 13 results matching your criteria.
Sort By:
Page of 2
On-Q / Legrand 363468-02 2x6 Enhanced Video Module On-Q / Legrand 364271-03 Video Power Transformer RPA
DISTRIBUTES A CATV OR ANTENNA SIGNAL, plus 1 modulator signal, to up to 6 television outlets. Features an integrated amplifier and power LED. 6" H x 6.5" W.

  • Distributes CATV signals for up to 6 television outlets
  • Supports digital satellite installation through a dual LNB satellite antenna feedthrough
  • Supports modulated video signal distribution from security and baby room cameras or VCR/DVD players
  • Two-way transmission with reverse path amplification supports addressable set-top boxes and future Internet services
  • Engineered to have zero signal strength loss (unity gain)
  • Integrated power LED
  • Simple and quick installation with the patented On-Q/Legrand mounting system
  • 10V DC, 400 mA transformer for the 2x6 (363468-02) or the 3x8 (363469-02) Enhanced Video Modules. Can also be used with the Video Engine (364219-01) or 2x16 Enhanced Video Module (364522-01s)

    Wheelock SP4-LOC-KIT - HVAC Emergency Shutoff Switch Kit Wheelock SP4-RMX - Remote Microphone Expansion Module
    Description:
    The SP4-LOC Remote Microphone and Local Operator Console is designed for indoor use with the SafePath4 SP40/2 and the SP40S panels for mass notification applications.
    The SP4-LOC contains the SafePath4 SPRM Remote Microphone module and eight black push on/push off buttons which provide a contact closure used to activate the SP40/2 or SP40S digital messages in the ON position. The buttons change color from black in the OFF position to green in the ON position. A message name plate holder is located above the pushbuttons.
    An optional HVAC Emergency Shutoff red, mushroom type cutoff pushbutton and labeling is available as a seperate kit.
    The Remote Microphone module (SPRM) incorpoates a Push-To-Talk (PTT) microphone and system status LED indicators. The SPRM provides a microphone override for any tone generation, digitak voice module prerecorded message, background music, or telephone paging. It is equipped with a keyed lock that, when activated, allows the use of the module. The SPRM is fully supervised from the SP40/2 or the SP40S panel and contains front panel LEDs for remote indications of System Normal, System Trouble, and Alarm conditions. Voice frequency response shall be 275 Hz-6.5 kHz +/- 2.4 dB. Power requirements shall be 24VDC and will be supplied by the SP40/2 or SP40S. Input current for standby mode shall be 26mA and 38mA in the alarm mode. Shielded 6-wire cable shall be used. Approvals for the system shall include; UL Standard 864, UL Standard 1711, FCC Part 15, and CSFM. The panel shall be OSHA 1910.165 and ADA compliant.
    The SP4-LOC is available in two models. The flush mount model has a 1/2 inch skirt around the door section, while the surface mount model door section is flush with the back box. Both models use the same white 4 inch deep backbox with a single 1/2 inch/ 3/4 inch double knockout on the back center, and top and bottom of the backbox.
    The flush mount door section has exterior dimensions of 15-1/2 inches wide and 16-1/4 inches high. The surface mount model has dimensions of 14-1/2 inches wide, 15-1/2 inches high and 4 inches deep. Both models have a pull slam latch to open the continuous hinged door. Both models are available in white.
    The SP4-LOC can be installed up to 2,000 feet from the SP40/2 or SP40S panel using 14-18 AWG wiring. Shielded wire is only required for the 1Vrms output from the SPRM.

    Features:
    • All message wiring is pre-wired to a terminal block
    • Internal terminal block accepts up to 16 AWG wiring for filed wiring
    • Built-in SPRM requires 24VDC, supplied by the SP40/2 or SP40S
    • SPRM Input current: Standby: 26mA Alarm: 38mA
    • All output circuitry is Power Limited
    • SP4 LOC is available in flush and surface models
    • Backbox for both models are identical with knockout mounting holes in the sides and back
    • Backbox contains three (3) double knockouts for 1/2” or 3/4” conduit fittings. Knockouts are located in the center top and bottom and one in the center top back
    • Optional HVAC Emergency Shutoff mushroom pushbutton kit
    • Can be mounted up to 2,000 feet away from the SP40/2 or SP40S
    • Remote microphone usage disengages background music and general paging
    • Eight (8) push on/push off pushbuttons that provide a contact closure in the ON position. Pushbuttons are balck in the OFF position and green in the ON position.


    Applications:
    • Expands one remote microphone (SPRM) from the
    SP40S or SP40/2 to three remote microphones
    • Two SP4-RMX modules can be cascaded together
    to provide up to six remote microphones from the
    SP40S or SP40/2
    • Provides for an auxiliary input for connection of an
    external VoiceLink message repeater for additional
    messages

    Features:
    • The SP4-RMX will provide the capability of connecting
    up to (3) three Remote Microphone Stations (SPRM)
    • When connected to the SP40S or SP40/2, two SP4-
    RMX units can be cascaded together to provide up to
    six remote microphones
    • Provides for an auxiliary input for connection of an
    external message repeater, for additional messages
    • Can accept a line level input for broadcasting of other
    information
    • When the SP4-RMX is connected to the SP40S or
    SP40/2, the entire system benefits from the additional
    microphone capability
    • Can be connected to Audio Boosters for general (nonalarm)
    paging with use of SPRM-GP
    • UL Standard 864 listed
    • OSHA 1910.165, ADA and UFC compliant
    • Multiple on board diagnostics with 3 status conditions:
    standby, alarm, and trouble
    • Operates on 24 VDC, supplied by the SP40S,
    SP40/2, SPB-80/4, SPB-160, SPB-320
    • The SP4-RMX is an external module

    Enclosure dimensions: 13”H x 7.6”W x 2.15”D
    Color: Black
    Wall mountable

    Winland Electronics Inc. EA20012 -  Dual Zone Monitoring Alarm (12 VDC Power Option) Winland Electronics Inc. EA20024 - Dual Zone Monitoring Alarm (24 VDC Power Option)
    [PN# EA20012 & EA20024]

    Monitor four zones with any combination of a remote temperature, humidity or water sensing probe. If temperatures and humidity deviate from the preset limits or water forms a bridge between the contacts on the WaterBug® sensor the designated relay for each zone will activate an alarm, dialer, transmitter, etc.

    Features:

    • Simultaneous operation of both zones
    • Defrost time delay up to 120 minutes
    • Easy to read large LCD display
    • Eight event alarm memory with time and date
    • Auxiliary output relay for local audible alarm
    • Auxiliary alarm silence feature with 10 minute timer
    • Each zone has offset calibration adjustment
    • Temperature & humidity Hi / Lo set points
    • Output relays can be configured to be initially energized or de-energized
    • Tamper proof lock setting
    • Snap fit mounting base with main housing for easy access
    • Plug in terminal strip connectors for easier wire termination
    • Zones being monitored are displayed every few seconds
    • Display F°, C°, % (Humidity) or Water Drop icon
    • Zone configuration retained in memory if power is lost



    Specifications:

    • Dimensions: 6.0” x 4.75 x 1.25
    • Weight: .55 lb
    • Lo & Hi Limit Adjust Range: -58 to 299° F
    • Input Voltage: 12 VDC @ <200mA
    • Number of sensor inputs: 1
    • Unit Operating Range: +32 to 122° F
    • Alarm Outputs: 2 - SPDT Relays (Configurable)
    • Auxiliary Audible Alarm Output: 1 - SPDT Relays
      (Non-configurable)
    • Case Material: ABS
    [PN# EA20012 & EA20024]

    Monitor four zones with any combination of a remote temperature, humidity or water sensing probe. If temperatures and humidity deviate from the preset limits or water forms a bridge between the contacts on the WaterBug® sensor the designated relay for each zone will activate an alarm, dialer, transmitter, etc.

    Features:

    • Simultaneous operation of both zones
    • Defrost time delay up to 120 minutes
    • Easy to read large LCD display
    • Eight event alarm memory with time and date
    • Auxiliary output relay for local audible alarm
    • Auxiliary alarm silence feature with 10 minute timer
    • Each zone has offset calibration adjustment
    • Temperature & humidity Hi / Lo set points
    • Output relays can be configured to be initially energized or de-energized
    • Tamper proof lock setting
    • Snap fit mounting base with main housing for easy access
    • Plug in terminal strip connectors for easier wire termination
    • Zones being monitored are displayed every few seconds
    • Display F°, C°, % (Humidity) or Water Drop icon
    • Zone configuration retained in memory if power is lost



    Specifications:

    • Dimensions: 6.0” x 4.75 x 1.25
    • Weight: .55 lb
    • Lo & Hi Limit Adjust Range: -58 to 299° F
    • Input Voltage: 12 VDC @ <200mA
    • Number of sensor inputs: 1
    • Unit Operating Range: +32 to 122° F
    • Alarm Outputs: 2 - SPDT Relays (Configurable)
    • Auxiliary Audible Alarm Output: 1 - SPDT Relays
      (Non-configurable)
    • Case Material: ABS
    Winland Electronics Inc. EA40012 -  Four Zone Monitoring Alarm (12 VDC Power Option) Winland Electronics Inc. EA40024 -  Four Zone Monitoring Alarm (24 VDC Power Option)
    [PN# EA40012 & EA40024]

    Monitor four zones with any combination of a remote temperature, humidity or water sensing probe. If temperatures and humidity deviate from the preset limits or water forms a bridge between the contacts on the WaterBug sensor the designated relay for each zone will activate an alarm, dialer, transmitter, etc.

    Features:

    • Simultaneous operation of all four zones
    • Defrost time delay up to 120 minutes
    • Easy to read large LCD display
    • Eight event alarm memory with time and date
    • Auxiliary output relay for local audible alarm
    • Auxiliary alarm silence feature with 10 minute timer
    • Each zone has offset calibration adjustment
    • Temperature & humidity Hi / Lo set points
    • Output relays can be configured to be initially energized or de-energized
    • Tamper proof lock setting
    • Snap fit mounting base with main housing for easy access
    • Plug in terminal strip connectors for easier wire termination
    • Zones being monitored are displayed every few seconds
    • Display F, C, % (Humidity) or Water Drop icon
    • Zone configuration retained in memory if power is lost



    Specifications:

    • Dimensions: 6.0 x 4.75 x 1.25
    • Weight: .60 lb
    • Lo & Hi Limit Adjust Range: -58 to 299 F
    • Input Voltage: 12 VDC @ <200mA
    • Number of sensor inputs: 4
    • Unit Operating Range: +32 to 122 F
    • Alarm Outputs: 4 - SPDT Relays (Configurable)
    • Auxiliary Audible Alarm Output: 1 - SPDT Relays (Non-configurable)
    • Case Material: ABS
    [PN# EA40012 & EA40024]

    Monitor four zones with any combination of a remote temperature, humidity or water sensing probe. If temperatures and humidity deviate from the preset limits or water forms a bridge between the contacts on the WaterBug® sensor the designated relay for each zone will activate an alarm, dialer, transmitter, etc.

    Features:

    • Simultaneous operation of all four zones
    • Defrost time delay up to 120 minutes
    • Easy to read large LCD display
    • Eight event alarm memory with time and date
    • Auxiliary output relay for local audible alarm
    • Auxiliary alarm silence feature with 10 minute timer
    • Each zone has offset calibration adjustment
    • Temperature & humidity Hi / Lo set points
    • Output relays can be configured to be initially energized or de-energized
    • Tamper proof lock setting
    • Snap fit mounting base with main housing for easy access
    • Plug in terminal strip connectors for easier wire termination
    • Zones being monitored are displayed every few seconds
    • Display F°, C°, % (Humidity) or Water Drop icon
    • Zone configuration retained in memory if power is lost



    Specifications:

    • Dimensions: 6.0” x 4.75 x 1.25
    • Weight: .60 lb
    • Lo & Hi Limit Adjust Range: -58 to 299° F
    • Input Voltage: 12 VDC @ <200mA
    • Number of sensor inputs: 4
    • Unit Operating Range: +32 to 122° F
    • Alarm Outputs: 4 - SPDT Relays (Configurable)
    • Auxiliary Audible Alarm Output: 1 - SPDT Relays (Non-configurable)
    • Case Material: ABS
    On-Q / Legrand 363469-02 3x8 Enhanced Video Module On-Q / Legrand 364522-01 2x16 Enhanced Video Module
    Distributes a CATV or Antenna Signal, plus two modulator signals, to up to eight television outlets Supports digital satellite systems with dual LNB connections Features reverse path amplification for set-top box transmission Distributes video from security/baby room cameras or VCR/DVD players 6" H x 65" W The On-Q Legrand 364522-01 is an enhanced video module that supports modulated video signal distribution from security and baby room cameras or VCR/DVD players The 364522-01 distributes CATV signal for up to 16 television outlets Features an integrated power LED and reverse-path amplification for set top-box transmission Dimensions: 89"H x 625"W x 325"D.
    On-Q/Legrand VM7632 Bi-Directional Amplifier Video Module On-Q/Legrand VM7640 1X1 Bi-Directional Video Amplifier Module
    Amplifies signals to up to 16 television locations and provides up to eight internal connections when installed with a video module. 2X2 Enhanced bi-directional video amplifier module. The On-Q/Legrand 1x1 Bi-Directional Video Amplifier amplifies video signals and, when coupled with a passive video distribution module, distributes them to TVs throughout the home. The VM7640 video amplifier is a simple solution that creates a flexible and scalable amplified video system. This affordable module makes it cost-effective to add amplification to every structured wiring installation. The new and improved bay style brackets save space and simplify wire management. And by including the bracket with the module, ordering is fast and convenient with "out-of-the-box" simplicity.
       
     
     
     

    Enter your email for a chance to WIN $100 Amex Gift Card.

    Please Enter Your Email Address

    *One entry per household please