|
|
|
|
|
|
|
|
|
|
Combines dual LNB connections from the satellite dish with a cable TV or antenna signal for distribution via a single coaxial cable to up to four receivers. 6” H x 6.5” W. Note: Consult On-Q Home Technical Support for satellite network service provider compatibility. Built-in diplex filter Ability to show digital satellite programming on up to 4 TV’s independently High-performance digital satellite connections (Formerly OnQ Technologies)
|
Combines dual LNB connections from the satellite dish with a cable TV or antenna signal for distribution via a single coaxial cable to up to four receivers. 6” H x 6.5” W. Note: Consult On-Q Home Technical Support for satellite network service provider compatibility. Built-in diplex filter Ability to show digital satellite programming on up to 4 TV’s independently High performance digital satellite connections (Formerly OnQ Technologies)
|
|
|
|
|
|
|
|
|
|
|
|
|
SUPPORTS INSTALLATION of a Spaun SMS 580NF Multi-switch in an On-Q Enclosure. Features: On-Q Mounting Plates provide a clean and organized solution for installing third-party security controllers into On-Q Enclosures. Provide a security connection point for telephone line seizure.
|
The Advanced 5x8 Four LNB Multi-Switch is designed for DIRECTV ™ installations. It allows up to eight satellite receivers to be connected to a Quad LNB Dish (four LNB connections total). This multi-switch has a non-amplified antenna (or cable) input to facilitate combining of terrestrial and satellite information over a single RG6 coaxial cable run. Unique wire management is utilized through integrated lacing bars built into the switch, from which wiring can be secured. All modules support DirecTV® digital satellite service Cost-effective distribution of the CATV/off-air antenna and DBS signal over one cable Ability to support up to 8 satellite receivers High-performance fittings to ensure high-quality connections Easily relocate satellite services from room to room Quick and easy installation with the patented On-Q Home mounting system Ability to distribute digital satellite up to eight satellite receivers Designed for DirecTV® applications Integrated lacing bars for improvedwire management Built-in Diplex Filter Technical Specifications: Input bands Satellite: 950-2150 MHz
Terrestrial: 54-850 MHz
Noise Figure Satellite: 6dB
Terrestrial: 4dB
Output Return Loss: 14dB
Control Voltage: 13/17 VDC between left and right polarization
Control Signals: 22KHz Between Satellites
Cross Polar Isolation: 30dB
24 VDC Power Supply (Formerly OnQ Technologies)
|
|
|
|
|
|
|
|
|
|
|
|
|
The On-Q Home Satellite Surge Suppressor protects the satellite receiver, multi-switch and television monitor from harmful voltage. If an incoming satellite signal would take a hit from a nearby lightning spike, this surge suppressor would dissipate harmful energy before it reaches any electronic components down the line. In this instance, this device would suppress the voltage spike before it makes it to any On-Q Home multi-switches or video amplifiers with satellite inputs. (Formerly OnQ Technologies)
|
Combines dual LNB connections from the satellite dish with a cable TV/antenna signal for distribution via a single coaxial cable to up to two receivers.
|
|
|
|
|
|
|
|
|
|
|
|
|
Used at the satellite receiver to split the DBS signal and the cable TV or antenna signal from a Diplex Filter Module or Digital Satellite Multi Switch for DirecTV service
|
Up to Four Coax Feeds From Satellite Dishes: The 1X4 Satellite Distribution Module combines an antenna, CATV, and/or an internal network to any combination of satellite installations using up to 4 coaxial feeds from satellite dishes (LNB's). Whether it's HDTV, satellite, interactive TV, or DVDs, On-Q TV and Video Solutions let you get the most out of all the hottest video-based technologies with rock solid signals and the sharpest pictures.
|
|
|
|
|
|
|
|
|
|
|
|
The NEW Wheelock Series E60 Ceiling Speakers and Speaker Strobes are designed for high efficiency sound output, with dual voltage (25/70 VRMS) capability and field selectable taps from 1/8 to 2 watts. These E60 Multi-Candela ceiling appliances are part of the new family of ceiling mount strobe appliances that will also be available on strobes, horns and horn/strobes. Optional Extender (E60 Ext) is for mounting to 4" backboxes with no extension ring.
The Series E60 Speaker Strobe models incorporate the Low Current draw Series RSS Strobes. These ceiling mount round models are available in Wheelock patented MCC multi-candela ceiling strobe with field selectable intensities of 15/30/75/95cd or the high intensity MCCH strobe with field selectable 115/177cd.
Series E60 Speakers and Speaker Strobes provide high audio output with clear audibility and are designed to meet the critical needs of the life safety industry for effective emergency voice communications, tone signaling and visible signaling to alert the hearing impaired.
The low profile design incorporates a speaker mounting plate for faster and easier installation. Each model has a built-in level adjust-ment feature and snap-on cover with no visible mounting screws.
The strobe portion of all Series E60 Speaker Strobes may be synchronized when used in conjunction with the Wheelock SM, DSM Sync Modules or the Wheelock PS-24-8MC Power Supply with Patented Sync Protocol. Wheelock synchronized strobes offer an easy way to comply with ADA recommendations concerning photosensitive epilepsy.
Series E60 Speaker Strobes are UL Listed for indoor use under Standard 1971 (Signaling Devices for the Hearing-Impaired) and Standard 1480 (Speaker Appliances), and use a Xenon flashtube with solid state circuitry enclosed in a rugged Lexan lens to provide maximum reliability for effective visual signaling. All inputs are supervised and employ IN/OUT wiring terminals for fast installation using #12 to #18 AWG wiring.
Color options for the Series E60 Speakers and Speaker Strobes are red and white.
|
The NEW Wheelock Series E60 Ceiling Speakers and Speaker Strobes are designed for high efficiency sound output, with dual voltage (25/70 VRMS) capability and field selectable taps from 1/8 to 2 watts. These E60 Multi-Candela ceiling appliances are part of the new family of ceiling mount strobe appliances that will also be available on strobes, horns and horn/strobes. Optional Extender (E60 Ext) is for mounting to 4" backboxes with no extension ring.
The Series E60 Speaker Strobe models incorporate the Low Current draw Series RSS Strobes. These ceiling mount round models are available in Wheelock patented MCC multi-candela ceiling strobe with field selectable intensities of 15/30/75/95cd or the high intensity MCCH strobe with field selectable 115/177cd.
Series E60 Speakers and Speaker Strobes provide high audio output with clear audibility and are designed to meet the critical needs of the life safety industry for effective emergency voice communications, tone signaling and visible signaling to alert the hearing impaired.
The low profile design incorporates a speaker mounting plate for faster and easier installation. Each model has a built-in level adjust-ment feature and snap-on cover with no visible mounting screws.
The strobe portion of all Series E60 Speaker Strobes may be synchronized when used in conjunction with the Wheelock SM, DSM Sync Modules or the Wheelock PS-24-8MC Power Supply with Patented Sync Protocol. Wheelock synchronized strobes offer an easy way to comply with ADA recommendations concerning photosensitive epilepsy.
Series E60 Speaker Strobes are UL Listed for indoor use under Standard 1971 (Signaling Devices for the Hearing-Impaired) and Standard 1480 (Speaker Appliances), and use a Xenon flashtube with solid state circuitry enclosed in a rugged Lexan lens to provide maximum reliability for effective visual signaling. All inputs are supervised and employ IN/OUT wiring terminals for fast installation using #12 to #18 AWG wiring.
Color options for the Series E60 Speakers and Speaker Strobes are red and white.
|
|
|
|
|
|
|
|
|
|
The NEW Wheelock Series E60 Ceiling Speakers and Speaker Strobes are designed for high efficiency sound output, with dual voltage (25/70 VRMS) capability and field selectable taps from 1/8 to 2 watts. These E60 Multi-Candela ceiling appliances are part of the new family of ceiling mount strobe appliances that will also be available on strobes, horns and horn/strobes. Optional Extender (E60 Ext) is for mounting to 4" backboxes with no extension ring.
The Series E60 Speaker Strobe models incorporate the Low Current draw Series RSS Strobes. These ceiling mount round models are available in Wheelock patented MCC multi-candela ceiling strobe with field selectable intensities of 15/30/75/95cd or the high intensity MCCH strobe with field selectable 115/177cd.
Series E60 Speakers and Speaker Strobes provide high audio output with clear audibility and are designed to meet the critical needs of the life safety industry for effective emergency voice communications, tone signaling and visible signaling to alert the hearing impaired.
The low profile design incorporates a speaker mounting plate for faster and easier installation. Each model has a built-in level adjust-ment feature and snap-on cover with no visible mounting screws.
The strobe portion of all Series E60 Speaker Strobes may be synchronized when used in conjunction with the Wheelock SM, DSM Sync Modules or the Wheelock PS-24-8MC Power Supply with Patented Sync Protocol. Wheelock synchronized strobes offer an easy way to comply with ADA recommendations concerning photosensitive epilepsy.
Series E60 Speaker Strobes are UL Listed for indoor use under Standard 1971 (Signaling Devices for the Hearing-Impaired) and Standard 1480 (Speaker Appliances), and use a Xenon flashtube with solid state circuitry enclosed in a rugged Lexan lens to provide maximum reliability for effective visual signaling. All inputs are supervised and employ IN/OUT wiring terminals for fast installation using #12 to #18 AWG wiring.
Color options for the Series E60 Speakers and Speaker Strobes are red and white.
|
|
|
