You are here: Home > Shop Brands > Camden Door Controls > Door Activation Devices > Push/Exit Buttons > Vandal Resistant Switches > Single Gang
We found 7 results matching your criteria.
Sort By:
Page of 1
Camden CM-9080 Vandal Resistant Exit Switch - Single Gang Faceplate, DPDT Momentary Camden CM-9080E DPDT Momentary Single Gang Switch with "Exit" Engraved

Vandal Resistant Exit Switch - Single Gang Faceplate, DPDT Momentary

Camden Manufacturing CM-9000 Series exit switches are vandal resistant pushbuttons, especially designed and manufactured for high traffic or vandal prone applications. The buttons are an all-metal construction, and will withstand extreme attacks of all types. The buttons are countersunk in a heavy duty, 1⁄4 ” thick brushed aluminum faceplate, in single gang (2 3⁄4 ”) or narrow stile (1 3⁄4 ”) widths. Optional US40 (duranodic), finish is also available. The DPDT switches are UL/CSA approved, rated 6 amps @ 125V AC in either momentary or maintained configurations.

Camden vandal-resistant exit switches are ideal for high traffic, vandal-prone areas such as building front entrances and exits, schools, and correctional facilities. May also be used in hospitals and other institutions where a low profile, discreet activating device is required.

Camden exit switches are designed to control overhead doors, electric locks, electromagnetic locks, electric strikes, automatic doors, and handicap operators. They may also be used for shunting, bypassing alarms, request to exit, timed functions, and many other applications. The switches are made for high frequency usage, in an indoor or outdoor environment.

• ALL METAL, VANDAL RESISTANT CONSTRUCTION
• STEEL BUTTON WILL WITHSTAND EXTREME ATTACKS OF ALL TYPES
• BUTTON IS COUNTERSUNK IN HEAVY 1⁄4 ” THICK ALUMINUM PLATE
• SINGLE GANG PLATE
• INDOOR OR OUTDOOR APPLICATIONS
• UL/CSA APPROVED DPDT SWITCHES, RATED 6 AMPS AT 125V AC.
• COLOR CODED 18 AWG LEADS, WITH SPADE CONNECTORS
• BRUSHED ALUMINUM FINISH

DPDT Momentary Single Gang Switch with "Exit" Engraved

Camden Door Controls CM-9000 Series exit switches are vandal resistant pushbuttons, especially designed and manufactured for high traffic or vandal prone applications.

The buttons are an all-metal construction, and will withstand extreme attacks of all types. The buttons are countersunk in a heavy duty, 1⁄4 ” thick brushed aluminum faceplate, in single gang (2 3⁄4 ”) or narrow stile (1 3⁄4 ”) widths. Optional US40 (duranodic), finish is also available.

The DPDT switches are UL/CSA approved, rated 6 amps @ 125V AC in either momentary or maintained configurations.

Camden vandal-resistant exit switches are ideal for high traffic, vandal-prone areas such as building front entrances and exits, schools, and correctional facilities. May also be used in hospitals and other institutions where a low profile, discreet activating device is required.

Camden exit switches are designed to control overhead doors, electric locks, electromagnetic locks, electric strikes, automatic doors, and handicap operators. They may also be used for shunting, bypassing alarms, request to exit, timed functions, and many other applications. The switches are made for high frequency usage, in an indoor or outdoor environment.

All CM-9000 series vandal resistant exit switches come with a 9⁄1 6 “ round, all-metal button, DPDT switch, brushed aluminum faceplate, 2 socket/slotted screws, and 2 tamperproof screws.

Features:
  • 4 3/8" by 2 3/4"
  • Indoor or outdoor applications
Camden CM-9090 DPDT Maintained Single Gang Switch Winland Electronics Inc. EA20012 -  Dual Zone Monitoring Alarm (12 VDC Power Option)

DPDT Maintained Single Gang Switch

Camden Door Controls CM-9000 Series exit switches are vandal resistant pushbuttons, especially designed and manufactured for high traffic or vandal prone applications.

The buttons are an all-metal construction, and will withstand extreme attacks of all types. The buttons are countersunk in a heavy duty, 1⁄4 ” thick brushed aluminum faceplate, in single gang (2 3⁄4 ”) or narrow stile (1 3⁄4 ”) widths. Optional US40 (duranodic), finish is also available.

The DPDT switches are UL/CSA approved, rated 6 amps @ 125V AC in either momentary or maintained configurations.

Camden vandal-resistant exit switches are ideal for high traffic, vandal-prone areas such as building front entrances and exits, schools, and correctional facilities. May also be used in hospitals and other institutions where a low profile, discreet activating device is required.

Camden exit switches are designed to control overhead doors, electric locks, electromagnetic locks, electric strikes, automatic doors, and handicap operators. They may also be used for shunting, bypassing alarms, request to exit, timed functions, and many other applications. The switches are made for high frequency usage, in an indoor or outdoor environment.

All CM-9000 series vandal resistant exit switches come with a 9⁄1 6 “ round, all-metal button, DPDT switch, brushed aluminum faceplate, 2 socket/slotted screws, and 2 tamperproof screws.

Features:
  • 4 3/8" by 2 3/4"
  • Indoor or outdoor applications
[PN# EA20012 & EA20024]

Monitor four zones with any combination of a remote temperature, humidity or water sensing probe. If temperatures and humidity deviate from the preset limits or water forms a bridge between the contacts on the WaterBug® sensor the designated relay for each zone will activate an alarm, dialer, transmitter, etc.

Features:

  • Simultaneous operation of both zones
  • Defrost time delay up to 120 minutes
  • Easy to read large LCD display
  • Eight event alarm memory with time and date
  • Auxiliary output relay for local audible alarm
  • Auxiliary alarm silence feature with 10 minute timer
  • Each zone has offset calibration adjustment
  • Temperature & humidity Hi / Lo set points
  • Output relays can be configured to be initially energized or de-energized
  • Tamper proof lock setting
  • Snap fit mounting base with main housing for easy access
  • Plug in terminal strip connectors for easier wire termination
  • Zones being monitored are displayed every few seconds
  • Display F°, C°, % (Humidity) or Water Drop icon
  • Zone configuration retained in memory if power is lost



Specifications:

  • Dimensions: 6.0” x 4.75 x 1.25
  • Weight: .55 lb
  • Lo & Hi Limit Adjust Range: -58 to 299° F
  • Input Voltage: 12 VDC @ <200mA
  • Number of sensor inputs: 1
  • Unit Operating Range: +32 to 122° F
  • Alarm Outputs: 2 - SPDT Relays (Configurable)
  • Auxiliary Audible Alarm Output: 1 - SPDT Relays
    (Non-configurable)
  • Case Material: ABS
Winland Electronics Inc. EA20024 - Dual Zone Monitoring Alarm (24 VDC Power Option) Winland Electronics Inc. EA40012 -  Four Zone Monitoring Alarm (12 VDC Power Option)
[PN# EA20012 & EA20024]

Monitor four zones with any combination of a remote temperature, humidity or water sensing probe. If temperatures and humidity deviate from the preset limits or water forms a bridge between the contacts on the WaterBug® sensor the designated relay for each zone will activate an alarm, dialer, transmitter, etc.

Features:

  • Simultaneous operation of both zones
  • Defrost time delay up to 120 minutes
  • Easy to read large LCD display
  • Eight event alarm memory with time and date
  • Auxiliary output relay for local audible alarm
  • Auxiliary alarm silence feature with 10 minute timer
  • Each zone has offset calibration adjustment
  • Temperature & humidity Hi / Lo set points
  • Output relays can be configured to be initially energized or de-energized
  • Tamper proof lock setting
  • Snap fit mounting base with main housing for easy access
  • Plug in terminal strip connectors for easier wire termination
  • Zones being monitored are displayed every few seconds
  • Display F°, C°, % (Humidity) or Water Drop icon
  • Zone configuration retained in memory if power is lost



Specifications:

  • Dimensions: 6.0” x 4.75 x 1.25
  • Weight: .55 lb
  • Lo & Hi Limit Adjust Range: -58 to 299° F
  • Input Voltage: 12 VDC @ <200mA
  • Number of sensor inputs: 1
  • Unit Operating Range: +32 to 122° F
  • Alarm Outputs: 2 - SPDT Relays (Configurable)
  • Auxiliary Audible Alarm Output: 1 - SPDT Relays
    (Non-configurable)
  • Case Material: ABS
[PN# EA40012 & EA40024]

Monitor four zones with any combination of a remote temperature, humidity or water sensing probe. If temperatures and humidity deviate from the preset limits or water forms a bridge between the contacts on the WaterBug sensor the designated relay for each zone will activate an alarm, dialer, transmitter, etc.

Features:

  • Simultaneous operation of all four zones
  • Defrost time delay up to 120 minutes
  • Easy to read large LCD display
  • Eight event alarm memory with time and date
  • Auxiliary output relay for local audible alarm
  • Auxiliary alarm silence feature with 10 minute timer
  • Each zone has offset calibration adjustment
  • Temperature & humidity Hi / Lo set points
  • Output relays can be configured to be initially energized or de-energized
  • Tamper proof lock setting
  • Snap fit mounting base with main housing for easy access
  • Plug in terminal strip connectors for easier wire termination
  • Zones being monitored are displayed every few seconds
  • Display F, C, % (Humidity) or Water Drop icon
  • Zone configuration retained in memory if power is lost



Specifications:

  • Dimensions: 6.0 x 4.75 x 1.25
  • Weight: .60 lb
  • Lo & Hi Limit Adjust Range: -58 to 299 F
  • Input Voltage: 12 VDC @ <200mA
  • Number of sensor inputs: 4
  • Unit Operating Range: +32 to 122 F
  • Alarm Outputs: 4 - SPDT Relays (Configurable)
  • Auxiliary Audible Alarm Output: 1 - SPDT Relays (Non-configurable)
  • Case Material: ABS
Winland Electronics Inc. EA40024 -  Four Zone Monitoring Alarm (24 VDC Power Option)
[PN# EA40012 & EA40024]

Monitor four zones with any combination of a remote temperature, humidity or water sensing probe. If temperatures and humidity deviate from the preset limits or water forms a bridge between the contacts on the WaterBug® sensor the designated relay for each zone will activate an alarm, dialer, transmitter, etc.

Features:

  • Simultaneous operation of all four zones
  • Defrost time delay up to 120 minutes
  • Easy to read large LCD display
  • Eight event alarm memory with time and date
  • Auxiliary output relay for local audible alarm
  • Auxiliary alarm silence feature with 10 minute timer
  • Each zone has offset calibration adjustment
  • Temperature & humidity Hi / Lo set points
  • Output relays can be configured to be initially energized or de-energized
  • Tamper proof lock setting
  • Snap fit mounting base with main housing for easy access
  • Plug in terminal strip connectors for easier wire termination
  • Zones being monitored are displayed every few seconds
  • Display F°, C°, % (Humidity) or Water Drop icon
  • Zone configuration retained in memory if power is lost



Specifications:

  • Dimensions: 6.0” x 4.75 x 1.25
  • Weight: .60 lb
  • Lo & Hi Limit Adjust Range: -58 to 299° F
  • Input Voltage: 12 VDC @ <200mA
  • Number of sensor inputs: 4
  • Unit Operating Range: +32 to 122° F
  • Alarm Outputs: 4 - SPDT Relays (Configurable)
  • Auxiliary Audible Alarm Output: 1 - SPDT Relays (Non-configurable)
  • Case Material: ABS
   
 
 
 

Enter your email for a chance to WIN $100 Amex Gift Card.

Please Enter Your Email Address

*One entry per household please