You are here: Home > Shop Brands > Camden Door Controls > Industrial Door & Gate Controls > Exterior Use - Push Button Control Stations
We found 4 results matching your criteria.
Sort By:
Page of 1
Camden CM-CI3BXL (CI-3BXL) 3 Button, Open/Close/Stop, NEMA 4, UL/CSA Rated, 3 AMP @ 240V AC with Key Lockout EDWARDS 125LEDSA24D 125 LED STEADY; AMBER 24VDC  - ED-125LEDSA2 - 125LED Series Standard LED Beacons for NEMA 4X Applications

CI-3BXL 3 Button, Open/Close/Stop, NEMA 4, UL/CSA Rated, 3 AMP @ 240V AC with Key Lockout

CAMDEN DOOR CONTROLS PUSH BUTTON STATIONS meet the stringent requirements of industrial door applications. They are available in outdoor and indoor versions. They provide output contacts capable of carrying up to 5 Amps at 240 VAC. Outdoor controls meet NEMA 4 standards when installed with liquid tight conduit. Indoor controls are NEMA 1 compliant. UL Rated and CSA Approved.

Camden CI series of industrial door controls are designed for use in factories, warehouses, and other industrial applications. Models are UL Listed and CSA approved. Outdoor controls are NEMA 4 rated for use in wet environments. These controls are ideal for activating overhead doors, storefront grills, shutters and gates.

Features:
  • Indoor (NEMA 1) / Outdoor (NEMA 4) Applications
  • 3 Buttons for Open, Close and Stop
  • Outputs:
    3 Single Pole, Momentary Contact, 2 N.O., 1-N.C., 2-Form A, 1-Form B Contacts
  • High Power Output Contacts
  • UL Rated, CSA Certified


The Edwards 125 Class Standard LED beacons are UL and cUL listed signaling appliances. Two versions of 125 Class Standard LED Beacons are available: Flashing 65 FPM (125LEDF) and Steady-On (125LEDS). Both versions feature a corrosion resistant Type 4X enclosure and can be panel or conduit mounted. The base is manufactured from a 33% glass filled nylon, providing high resistance to heat and high chemical resistivity. The lens is made of shatter resistant polycarbonate. Both the Flashing LED and Steady-On LED beacons are available with either a black or gray base, and amber, blue, green or red lens.



  • Available in 24V DC or 120V AC

  • Available with gray or black base

  • Option for panel or conduit mounting

  • Available in Flashing LED or Steady-On LED versions

  • Available with amber, blue, green or red lens

  • Immune to shock and vibration

  • -31F to 150F (-35C to 66C) operating temperature

  • Protective wire guard available, Cat. No. 125GRD



The 125 Class Standard LED beacons can be mounted on 1/2" or 3/4" NPT conduit using a 1/2" internal or 3/4" external conduit hub that comes with the unit. It can also be panel mounted using the mounting gasket provided with the unit. When panel mounting the 125 Class Standard LED, the surface and construction details of the panel must be taken into consideration to ensure the integrity of the outdoor, NEMA 4X rating is fully maintained.

EDWARDS 125LEDSA24D 125 LED STEADY; RED 24VDC  - ED-125LEDSA2 - 125LED Series Standard LED Beacons for NEMA 4X Applications Wheelock RSS-24MCCR-FR Ceiling-Mount Strobe Round Red


The Edwards 125 Class Standard LED beacons are UL and cUL listed signaling appliances. Two versions of 125 Class Standard LED Beacons are available: Flashing 65 FPM (125LEDF) and Steady-On (125LEDS). Both versions feature a corrosion resistant Type 4X enclosure and can be panel or conduit mounted. The base is manufactured from a 33% glass filled nylon, providing high resistance to heat and high chemical resistivity. The lens is made of shatter resistant polycarbonate. Both the Flashing LED and Steady-On LED beacons are available with either a black or gray base, and amber, blue, green or red lens.



  • Available in 24V DC or 120V AC

  • Available with gray or black base

  • Option for panel or conduit mounting

  • Available in Flashing LED or Steady-On LED versions

  • Available with amber, blue, green or red lens

  • Immune to shock and vibration

  • -31F to 150F (-35C to 66C) operating temperature

  • Protective wire guard available, Cat. No. 125GRD



The 125 Class Standard LED beacons can be mounted on 1/2" or 3/4" NPT conduit using a 1/2" internal or 3/4" external conduit hub that comes with the unit. It can also be panel mounted using the mounting gasket provided with the unit. When panel mounting the 125 Class Standard LED, the surface and construction details of the panel must be taken into consideration to ensure the integrity of the outdoor, NEMA 4X rating is fully maintained.

These Wheelock multi-candela strobes provide intensities of 15 cd, 30 cd, 75 cd, 95 cd (ceiling-mount), and 110 cd (wall-mount).

They can be synchronized when used with the SM (single) and DSM (dual) Synchronization Modules or a compatible control panel. Synchronized strobes can eliminate possible restrictions on the number of strobes in the field of view. When synchronized, these strobes comply with ADA requirements concerning photosensitive epilepsy and meet the requirements of NFPA 72.
   
 
 
 

Enter your email for a chance to WIN $100 Amex Gift Card.

Please Enter Your Email Address

*One entry per household please