You are here: Home > Shop Brands > Camden Door Controls > Industrial Door & Gate Controls > Interior Use - Push Button Control Stations
We found 10 results matching your criteria.
Sort By:
Page of 1
Camden CM-CIPBU3 (CI-PBU3) 3 Button, Open/Close/Stop, NEMA 1, Surface Mount, 5 AMP @ 240V AC Camden CM-PBS3 (CI-PBS3) 3 Button, Open/Close/Stop, NEMA 1, 3 AMP @ 250V AC, Stainless Faceplate, Flush or Surface Mount

CI-PBU3 3 Button, Open/Close/Stop, NEMA 1, Surface Mount, 5 AMP @ 240V AC

CAMDEN DOOR CONTROLS PUSH BUTTON STATIONS meet the stringent requirements of industrial door applications. They are available in outdoor and indoor versions. They provide output contacts capable of carrying up to 5 Amps at 240 VAC. Outdoor controls meet NEMA 4 standards when installed with liquid tight conduit. Indoor controls are NEMA 1 compliant. UL Rated and CSA Approved.

Camden CI series of industrial door controls are designed for use in factories, warehouses, and other industrial applications. Models are UL Listed and CSA approved. Outdoor controls are NEMA 4 rated for use in wet environments. These controls are ideal for activating overhead doors, storefront grills, shutters and gates.

Features:
  • Indoor (NEMA 1) / Outdoor (NEMA 4) Applications
  • 3 Buttons for Open, Close and Stop
  • Outputs:
    3 Single Pole, Momentary Contact, 2 N.O., 1-N.C., 2-Form A, 1-Form B Contacts
  • High Power Output Contacts
  • UL Rated, CSA Certified

CI-PBS3 3 Button, Open/Close/Stop, NEMA 1, 3 AMP @ 250V AC, Stainless Faceplate, Flush or Surface Mount

CAMDEN DOOR CONTROLS PUSH BUTTON STATIONS meet the stringent requirements of industrial door applications. They are available in outdoor and indoor versions. They provide output contacts capable of carrying up to 5 Amps at 240 VAC. Outdoor controls meet NEMA 4 standards when installed with liquid tight conduit. Indoor controls are NEMA 1 compliant. UL Rated and CSA Approved.

Camden CI series of industrial door controls are designed for use in factories, warehouses, and other industrial applications. Models are UL Listed and CSA approved. Outdoor controls are NEMA 4 rated for use in wet environments. These controls are ideal for activating overhead doors, storefront grills, shutters and gates.

Features:
  • Indoor (NEMA 1) / Outdoor (NEMA 4) Applications
  • 3 Buttons for Open, Close and Stop
  • Outputs:
    3 Single Pole, Momentary Contact, 2 N.O., 1-N.C., 2-Form A, 1-Form B Contacts
  • High Power Output Contacts
  • UL Rated, CSA Certified
On-Q/Legrand EN2860 28" Modular Enclosure Door - Premium-Hinged HAI 1101A PESM Programmable Energy Saver Module
On-Q/Legrand EN2860 28" Modular Enclosure Door - Premium-Hinged The PESM (Programmable Energy Saver Module) is used to override existing thermostats for set-back control. It also may be used for sensing and controlling other temperatures, such as attic fans, garage fans, greenhouses, basements, wine coolers, humidors, etc. It may also be used to control spa heaters with remote temperature sensor. The PESM reports temperatures to the home control system, and has a low voltage relay and LED indicator for control. The PESM doubles as a freeze sensor, which can cause the controller to dial out in the event of a furnace failure. For the Lumina, Lumina Pro, Omni LT, Omni II, Omni IIe, or OmniPro II home control systems.

Specifications:

Dimensions: 2.75W x 2.75H x 1D
Temperature Range: 0F - 120F
Current Consumption: 14mA maximum
HAI 14A00-8 Water Temperature Sensor HAI 23A00-1 Surface Mount Remote Indoor Temperature Sensor
The 14A00-8 is a temperature sensor used to monitor the temperature of pools, spas, aquatic ponds, and greenhouses. The temperature sensing device is potted in a stainless steel probe. It is designed specifically to monitor water temperature from the return/source and then report that information back to an HAI Omni Family controller. If the temperature gets too high or low, the controller can then take the appropriate programmed action to bring the temperature back to the desired level. The temperature can also be displayed on the console, in PC Access, in Web-Link II, and spoken over the telephone. The 14A00-8 electronics are mounted in a plastic enclosure and are coated with a sealant to withstand outdoor moisture.

Specifications:

HAI Product No.: 14A00-8
Temperature Range: 0F - 120F
Current Consumption: 10mA max
Dimensions: 2" (W) x 1.5" (H) x 1" (D)
Add remote temperature sensing capabilities to your HAI Omni-series system or RC-series thermostats! Connect this indoor sensor to your RC-series thermostat and you can sense temperature from a remote location. As an add-on sensor, it can display the remote location's temperature on the thermostat's display. As a replacement sensor, you can use it to hide the thermostat in a closet or other location while keeping the sensor in an optimum location for temperature sensing.
HAI 23A00-2 Flush Mount Remote Indoor Temperature Sensor HAI 29A00-1 Omnistat RC-80B Relay Isolation Module
The Model 23A00-2 is a flush mount temperature sensor that can be installed on an Omnistat2 thermostat to monitor the temperature of a remote location, can be combined with the onboard temperature sensor for the average temperature of two locations, or can be used to monitor the outdoor temperature for dual fuel heat pump installations.
When used indoors, the remote sensor allows a customer to monitor the temperature of an area without having a visible thermostat. The thermostat, or group of thermostats, could be in a different location offering the customer complete control of temperatures.

Specifications:

Manufacturer: HAI
Manufacturer Product No.: 23A00-2
Compatibility: Use with HAI Omnistat Thermostats
Dimensions: 1 1/2" diameter
Use this Thermostat Isolation Module when continuous 24V power is not available from the HVAC system. It completely isolates your HAI thermostat from the heating and cooling system and allows a separate 24VAC transformer (sold separately) to power the thermostat.

Specifications:

Manufacturer: HAI
Manufacturer Product No.: 29A00-1
Power Supply: 24VAC transformer (not included)
Compatibility: For use with HAI Omnistat Thermostats
HAI 31A00-7 Extended Range Indoor/Outdoor Temperature Sensor HAI 31A00-8 Extended Range Indoor/Outdoor Temperature & Humidity Sensor
The Model 31A00-7 Extended Range Temperature Sensor is used for sensing temperatures from -40 F - 120 F. When connected to an HAI Home Control System with Firmware Version 2.8 or higher. It features a new, high accuracy temperature sensor. The temperature can be used to activate programs for controlling temperatures indoors and in attics, garages, greenhouses, basements, wine cellars, coolers, and freezers. The temperature can be displayed on the console or touchscreen, or spoken over the telephone. It can also report, log, alert, or generate an alarm if the temperature reaches freeze conditions or if the temperature goes above the high setpoint or drops below the low setpoint programmed in the system. When used outdoors, the Model 31A00-7 should be mounted under an overhang to protect it from direct sunlight and rain. It is coated with a sealant to withstand outdoor moisture. The outdoor temperature can be displayed on a console or touchscreen, spoken over the telephone, or displayed on an HAI communicating thermostat. Automation programs, macros, and indoor appliances can be controlled based on the outdoor temperature.

Specifications:

Manufacturer: HAI
Manufacturer Product No.: 31A00-7
Dimensions: 2.75W x 2.75H x 1D
Temperature Range: -40 F - 120 F
Current Consumption: 15mA maximum
The Model 31A00-8 Extended Range Temperature and Humidity Sensor is used for sensing temperatures from -40 F - 120 F. When connected to an HAI Home Control System with Firmware Version 2.8 or higher. It can also be used for reporting the relative humidity from 0 to 100 percent. The Model 31A00-8 features a new, high accuracy temperature sensor. The temperature can be used to activate programs for controlling temperatures in attics, garages, greenhouses, basements, wine cellars, coolers, and freezers. The temperature can be displayed on the console or touchscreen, or spoken over the telephone. It can also report, log, alert, or generate an alarm if the temperature reaches freeze conditions or if the temperature goes above the high setpoint or drops below the low setpoint programmed in the system. High and low humidity limits can be set for taking action (i.e. turning on the bathroom vent fan, running a/c in de-humidification mode, turning on humidifier in heating mode, etc.) or reporting high or low humidity conditions in homes, greenhouses, wine cellars, coolers, humidors, etc. Controlling humidity is particularly helpful in combating the growth of mold in vulnerable areas of the home, such as bathrooms, basements, attics, etc. When used outdoors, the Model 31A00-8 should be mounted under an overhang to protect it from direct sunlight and rain. It is coated with a sealant to withstand outdoor moisture. The outdoor temperature and/or humidity can be displayed on the console or touchscreen, or spoken over the telephone. Furthermore, the outdoor temperature can be displayed on an HAI communicating thermostat. Automation programs, macros, and indoor appliances can be controlled based on the outdoor temperature and/or humidity.

Specifications:

HAI Product No.: 31A00-8
Dimensions: 2.75" W x 2.75" H x 1" D
Temperature Range: -40 F to 120 F
Humidity Range: 0% to 100% relative humidity
Current Consumption: 15mA maximum
   
 
 
 

Enter your email for a chance to WIN $100 Amex Gift Card.

Please Enter Your Email Address

*One entry per household please