You are here: Home > Shop Brands > Camden Door Controls > Electrified Locks, Relays & Timers > Relays and Timers > Lock-Out Relays
We found 42 results matching your criteria.
Sort By:
Page of 4
Camden CM-CXPC3 (CX-PC-3) Lock Out Relay HAI 1101A PESM Programmable Energy Saver Module

CX-PC-3 Lock Out Relay

CAMDEN DOOR CONTROLS offers a Lock-Out Relay (L.O.R.) for any automatic door operator: EM-2 for spring close DC motors; PC-3 for power assist, handicap operators, or regular operators; and EH-4b for electro-hydraulic/pneumatic operators with AC motors/solenoids.

Camden EM2/PC-3/EH46 Lock-Out Relays are designed to be used with safety sensors such as Optex Model OA-601C.

Since the safety sensor would normally detect the door when it is closing, a relay lockout device is used to bypass the sensor in the closing cycle only.

The safety sensor is switched back into the circuit once the door comes to the fully closed position.

An added feature of our L.O.R.s is the ability to connect optional door beams. Should someone walk back into the path of the closing door, they would break the beam, which in turn would put the safety sensor back into circuit, turning on the operator safety.

This type of installation provides for maximum safety and is strongly recommended for swing doors.

Features:
  • Timer controlled lock-out is ideal for low-power handicap doors, or high speed doors
  • Also suitable for Power-assist-close operators
  • Motor input 20-90V DC
  • 12/24V AC/DC operation
  • Door beam input
  • LED indicator
  • 3- 30 second timer
  • Dimensions: 2" by 4" by 1"
The PESM (Programmable Energy Saver Module) is used to override existing thermostats for set-back control. It also may be used for sensing and controlling other temperatures, such as attic fans, garage fans, greenhouses, basements, wine coolers, humidors, etc. It may also be used to control spa heaters with remote temperature sensor. The PESM reports temperatures to the home control system, and has a low voltage relay and LED indicator for control. The PESM doubles as a freeze sensor, which can cause the controller to dial out in the event of a furnace failure. For the Lumina, Lumina Pro, Omni LT, Omni II, Omni IIe, or OmniPro II home control systems.

Specifications:

Dimensions: 2.75W x 2.75H x 1D
Temperature Range: 0F - 120F
Current Consumption: 14mA maximum
HAI 14A00-8 Water Temperature Sensor HAI 23A00-1 Surface Mount Remote Indoor Temperature Sensor
The 14A00-8 is a temperature sensor used to monitor the temperature of pools, spas, aquatic ponds, and greenhouses. The temperature sensing device is potted in a stainless steel probe. It is designed specifically to monitor water temperature from the return/source and then report that information back to an HAI Omni Family controller. If the temperature gets too high or low, the controller can then take the appropriate programmed action to bring the temperature back to the desired level. The temperature can also be displayed on the console, in PC Access, in Web-Link II, and spoken over the telephone. The 14A00-8 electronics are mounted in a plastic enclosure and are coated with a sealant to withstand outdoor moisture.

Specifications:

HAI Product No.: 14A00-8
Temperature Range: 0F - 120F
Current Consumption: 10mA max
Dimensions: 2" (W) x 1.5" (H) x 1" (D)
Add remote temperature sensing capabilities to your HAI Omni-series system or RC-series thermostats! Connect this indoor sensor to your RC-series thermostat and you can sense temperature from a remote location. As an add-on sensor, it can display the remote location's temperature on the thermostat's display. As a replacement sensor, you can use it to hide the thermostat in a closet or other location while keeping the sensor in an optimum location for temperature sensing.
HAI 23A00-2 Flush Mount Remote Indoor Temperature Sensor HAI 29A00-1 Omnistat RC-80B Relay Isolation Module
The Model 23A00-2 is a flush mount temperature sensor that can be installed on an Omnistat2 thermostat to monitor the temperature of a remote location, can be combined with the onboard temperature sensor for the average temperature of two locations, or can be used to monitor the outdoor temperature for dual fuel heat pump installations.
When used indoors, the remote sensor allows a customer to monitor the temperature of an area without having a visible thermostat. The thermostat, or group of thermostats, could be in a different location offering the customer complete control of temperatures.

Specifications:

Manufacturer: HAI
Manufacturer Product No.: 23A00-2
Compatibility: Use with HAI Omnistat Thermostats
Dimensions: 1 1/2" diameter
Use this Thermostat Isolation Module when continuous 24V power is not available from the HVAC system. It completely isolates your HAI thermostat from the heating and cooling system and allows a separate 24VAC transformer (sold separately) to power the thermostat.

Specifications:

Manufacturer: HAI
Manufacturer Product No.: 29A00-1
Power Supply: 24VAC transformer (not included)
Compatibility: For use with HAI Omnistat Thermostats
HAI 31A00-7 Extended Range Indoor/Outdoor Temperature Sensor HAI 31A00-8 Extended Range Indoor/Outdoor Temperature & Humidity Sensor
The Model 31A00-7 Extended Range Temperature Sensor is used for sensing temperatures from -40 F - 120 F. When connected to an HAI Home Control System with Firmware Version 2.8 or higher. It features a new, high accuracy temperature sensor. The temperature can be used to activate programs for controlling temperatures indoors and in attics, garages, greenhouses, basements, wine cellars, coolers, and freezers. The temperature can be displayed on the console or touchscreen, or spoken over the telephone. It can also report, log, alert, or generate an alarm if the temperature reaches freeze conditions or if the temperature goes above the high setpoint or drops below the low setpoint programmed in the system. When used outdoors, the Model 31A00-7 should be mounted under an overhang to protect it from direct sunlight and rain. It is coated with a sealant to withstand outdoor moisture. The outdoor temperature can be displayed on a console or touchscreen, spoken over the telephone, or displayed on an HAI communicating thermostat. Automation programs, macros, and indoor appliances can be controlled based on the outdoor temperature.

Specifications:

Manufacturer: HAI
Manufacturer Product No.: 31A00-7
Dimensions: 2.75W x 2.75H x 1D
Temperature Range: -40 F - 120 F
Current Consumption: 15mA maximum
The Model 31A00-8 Extended Range Temperature and Humidity Sensor is used for sensing temperatures from -40 F - 120 F. When connected to an HAI Home Control System with Firmware Version 2.8 or higher. It can also be used for reporting the relative humidity from 0 to 100 percent. The Model 31A00-8 features a new, high accuracy temperature sensor. The temperature can be used to activate programs for controlling temperatures in attics, garages, greenhouses, basements, wine cellars, coolers, and freezers. The temperature can be displayed on the console or touchscreen, or spoken over the telephone. It can also report, log, alert, or generate an alarm if the temperature reaches freeze conditions or if the temperature goes above the high setpoint or drops below the low setpoint programmed in the system. High and low humidity limits can be set for taking action (i.e. turning on the bathroom vent fan, running a/c in de-humidification mode, turning on humidifier in heating mode, etc.) or reporting high or low humidity conditions in homes, greenhouses, wine cellars, coolers, humidors, etc. Controlling humidity is particularly helpful in combating the growth of mold in vulnerable areas of the home, such as bathrooms, basements, attics, etc. When used outdoors, the Model 31A00-8 should be mounted under an overhang to protect it from direct sunlight and rain. It is coated with a sealant to withstand outdoor moisture. The outdoor temperature and/or humidity can be displayed on the console or touchscreen, or spoken over the telephone. Furthermore, the outdoor temperature can be displayed on an HAI communicating thermostat. Automation programs, macros, and indoor appliances can be controlled based on the outdoor temperature and/or humidity.

Specifications:

HAI Product No.: 31A00-8
Dimensions: 2.75" W x 2.75" H x 1" D
Temperature Range: -40 F to 120 F
Humidity Range: 0% to 100% relative humidity
Current Consumption: 15mA maximum
HAI 33A00-3 Omni Console Flush Mount Kit HAI 33A00-4 Omni Console with Speaker/Microphone
The Flush Mount Kit (HAI Part Number 33A00-3) (note that the console is not included) provides a painted backbox that mounts in the wall; the console then mounts into the backbox providing a professional, built-in look. This kit is designed specifically for HAI 33A00-1 consoles, and gives them a neat, clean, custom look, for just a few bucks.

Specifications:

Manufacturer: HAI
Manufacturer Product No.: 33A00-3
Compatibility: For use with Omni Controllers and LCD Console (each sold separately)
The Omni Console with Built-in Speaker/Microphone is a surface mount console with a slim design that can be flush mounted with an optional flush mount backbox (sold sep). This version of the Omni Console has a built-in speaker/microphone. For the speaker and microphone to work you must install a Two-Way Voice Module (HAI Part Number 10A11-1) in your home control system. sold sep.

Every Omni family home control system is required to use one of these Omni Console with Built-in Speaker/Microphone or an Omni Console (HAI Part Number 33A00-1). It features a 48 character cool blue backlight LCD display with menu operation, backlit keys, selectable keyclick, beeper functions and viewing angle. A two-color LED offers status at a glance: red for security armed, green when disarmed.

All control, security and programming functions can be accomplished using a console. It has Silk Screen with the menu options printed on the console face.

Benefits:

With the Omni Console with Built-in Speaker/Microphone you may broadcast automatic message announcements through the Console, such as Dad is home, Tonight is recycle night, or the automatic annunciation of an alarm and zone by voice, based upon system programmed events in your home control system. You can listen from on-premises or phone into your Omni family home control system to listen to your home through the console microphone or communicate through your console's speakers. This is particularly beneficial if your home control system has notified you that a certain event, such as the pushing of a panic button on the system, has occurred. This console allows two-way communication with a central station after an alarm. You can even leave a message for someone via the phone interface that is immediately and automatically announced when someone disarms its security system (OmniPro II only).
HAI 35A00-1 600 Watt Dimmer Switch HAI 35A00-1CS 600 Watt Dimmer Switch - Case of 12
The 600W switches use heavy duty components and UPB. UPB communication technology for professional strength, reliability, and the ability to be remotely controlled by UPB compatible home control systems. They work over existing house wiring for easy installation in renovations, retrofits, and upgrades and are UL-Listed. The HAI UPB 600W Switch is capable of storing up to 16 preset light levels to create powerful lighting scenes. It is capable of being set to a non-dimming mode (see Configuration Software below) in order to control loads, such as fluorescent lights, that do not belong on a dimming switch. The 600 Watt UPB Dimmer Switch works as a standalone switch or may be used with other HAI Products, including Room Controllers, House Controllers, and home control systems to provide sophisticated lighting control.

Specifications:

Manufacturer: HAI
Manufacturer Product No.: 35A00-1
Dimensions: 4.1" x 1.75" x 1.45"
Weight: 0.25 lb.
Power Maximum: 600 W
Current Maximum: 5A (non-dimming)
Connections: 18 GA
Mounting: Standard J box
Input Power: 120 +/- 12V AC
Input Frequency: 60 +/- 3 Hz
Operating Temperature: -40 F to 104 F
Compliance: UL and CE approved
The 600 Watt UPB Dimmer Switch is used for controlling and dimming lighting loads up to 600 Watts. It comes with a default white paddle, connectors, and instructions.

Requirements:

Requires a neutral (white) connection wire. If you are using an HAI home control system with your switch you must install a UPB PIM & cable (HAI Part Number 36A00-1). If you are using the HAI Upstart Configuration software you must install an UPB PIM & cable (HAI Part Number 36A00-1) and a cable to connect your PIM to a computer (HAI Part Number 36A05-2).

Recommendation:

HAI recommends that every HAI Lighting Control (HLC) installation include a Phase Coupler (HAI Part Number 39A00-1). All HLC products are UL Listed and use Universal Powerline Bus (UPB) a digital communications standard for lighting and home control that ensures superior reliability. UPB has been extensively tested and researched in residential environments and found to be 99.9 percent reliable. UPB works over existing wires in a home and does not require new wiring. The HAI UPB 600W Switch is capable of storing up to 16 preset light levels to create powerful lighting scenes. It is capable of being set to a non-dimming mode (see Configuration Software below) in order to control loads, such as fluorescent lights, that do not belong on a dimming switch.

Usage:

The 600 Watt UPB Dimmer Switch works as a standalone switch or may be used with other HAI Products, including Scene Switches, House Status Switches, and Home Control Systems to provide sophisticated lighting control. Our 600W switch has been engineered with less depth than our competitor's products; consequently, our switches are easier to install.

Switch LED:

The 600W switch comes with equipped with a multi-color LED indicator, which may be set to off, blue, red, or magenta. The default settings are as follows: Switch is off - LED is blue, Switch is on - LED is off

Colors:

This switch comes with a default white paddle, connectors, and instructions. Switch Color Change Kits (HAI Part Number 35A14-color codeCS) are available in in White (WH), Ivory (IV), Almond (AL), Light Almond (LTA), Brown (BR), Grey (GR), and Black (BL) colors. They are sold in case lots of 12 only.

Wallplate:

No Wallplate is included when you purchase this switch. With the exception of the 1500W and 2400W models, HLC switches accommodate standard Decora-style wallplates. Mix and match to easily add a personalized touch to any room.

Configuration Software:

When used with an HAI Home Control System HLC products automatically configure themselves, and outside software is not required. HAI offers HAI UPB UPStart Configuration software for professionals who desire to make advanced changes to our default setup. HAI UPB UPStart configuration software will allow you to change the function of this dimming switch to be non-dimming or vice-versa. This software also allows you to change the colors on the switch's LED and the rate that it brightens to fully on or dims to fully off.
   
 
 
 

Enter your email for a chance to WIN $100 Amex Gift Card.

Please Enter Your Email Address

*One entry per household please