|
|
|
|
|
|
|
|
|
|
CX-PS10UL Power Supply CAMDEN DOOR CONTROLS CX-PS Series power supplies converts 115 VAC/60 Hz input to individually protected 12 or 24 VDC outputs at 1.0, 2.5 Amps, or 6 Amps. The built-in battery charging circuits provide 400mA (CX-PS10UL) and 600mA (CX-PS30UL). The metal enclosures provide protection for the power supply and are large enough to accommodate 1 or 2 batteries. Camden Door Controls CX-PS Series power supplies are ideal for security alarm systems, access control systems, fire alarm systems, door controls, electromagnetic locks and many more applications. Features: - UL 294, CUL, NFPA101 and MEA listed
- Metal enclosure accommodates batteries
- Latching fire alarm tie-in with reset
- 12 or 24V DC selectable 1 amp output
- AC power and status indicators
- Short circuit and terminal protection
- 1 - 12V DC/7 AH battery or 2 - 12V DC/4 AH batteries
- Battery charger (400mA)
- 115V AC power input
- Enclosure dimensions: 8 1/2" by 7 1/2" by 3 1/2"
Specifications: - 12/24 VDC Output
- 1 AMP Output
- Battery Charger (400 MA)
- Enclosure Accommodates: One 12 VDC/7 AH Battery or two 12 VDC/4 AH Batteries
- 115 VAC input
- Enclosure Dimensions: 8 1/2” X 7 1/2” X 3 1/2”
|
DESIGNED SPECIFICALLY FOR RESIDENTIAL USE, the On-Q Wireless Access Point mounts flush in the ceiling and practically disappears when installed. No bigger than an in-ceiling speaker or smoke detector, the Wireless Access Point provides broad whole house coverage for surfing the Internet both indoors and outdoors. Features: Perfect for broad coverage or multiple localized hot spots Supports seamless roaming throughout the covered area Installs in standard plastic 3-gang switch box Power Over Cat 5e design requires only one cable for power & data Trouble-free configuration - plug 'n connect 802.11g; backwards compatible to 802.11b Supports data rates of up to 54 Mbps Integrated security features Ships with Power Over Cat 5e Injector & power supply
|
|
|
|
|
|
|
|
|
|
|
|
|
The same functionality as the Single Source Main Audio Input # F7398 with the additional benefit of “no leave-behind parts” because it mounts into the wall. Features: Simplifies the Installation with no “leave behind” parts at the job site Creates a Cleaner Multi-Room Audio Installation with no external components Includes adjustable gain control to adjust for higher or lower output device Works with all other lyriQ™ components - Use with Triple Source Input for a total of four input devices - Configurable for either Knob and Keypad modes AU1004-BK Black AU1004-LA Light Almond AU1004-WH White
|
The same functionality as the Single Source Main Audio Input # F7398 with the additional benefit of “no leave-behind parts” because it mounts into the wall. Features: Simplifies the Installation with no “leave behind” parts at the job site Creates a Cleaner Multi-Room Audio Installation with no external components Includes adjustable gain control to adjust for higher or lower output device Works with all other lyriQ™ components - Use with Triple Source Input for a total of four input devices - Configurable for either Knob and Keypad modes AU1004-BK Black AU1004-LA Light Almond AU1004-WH White
|
|
|
|
|
|
|
|
|
|
|
|
|
This attractive input device is built direclty into the wall and is used to quickly and easily connect input devices such as a home theater system, stereo receiver and an iPod. Features: Create a cleaner multi-room audio installation with no external components Includes adjustable gain control to adjust for higher or lower output device Use with a Flush Mount Single Source Input for a total of four input devices AU1011-BK Black AU1011-LA Light Almond AU1011-WH White
|
This attractive input device is built direclty into the wall and is used to quickly and easily connect input devices such as a home theater system, stereo receiver and an iPod. Features: Create a cleaner multi-room audio installation with no external components Includes adjustable gain control to adjust for higher or lower output device Use with a Flush Mount Single Source Input for a total of four input devices AU1011-BK Black AU1011-LA Light Almond AU1011-WH White
|
|
|
|
|
|
|
|
|
|
|
|
|
The lyriQ Local Source Input enables users to plug in devices like personal audio players locally for in-room entertainment. It automatically overrides the remote source music in the room and returns to the main source when the local source is turned off. It also includes a convenient RJ45 connection and adjustable gain control. Up to two local source inputs can be installed per zone, and it can be selected from the keypad or the On-Q remote. Features: Recommended for use with new lyriQ Keypads in Studio Design only (AU5009 and AU5010). Presented in new Studio Design for an enhanced look. Up to two inputs per zone. Product Specifications Voltage Requirements +24Vdc supplied by the Distribution Module Local Audio Input Signal 8.0vp-p ± 0.25vp-p max (Equip Line Level Signal) Audio Output Signal Gain Variable Range is approximately 0.5 to 5 Audio In RCA jacks, RJ45 connector Output Connections Audio Out: RJ45 connector Frequency Response 20 - 100 Hz ± 4 dB 100 - 20,000 Hz ± 2 dB IR Receive Frequency 10 KHz ± 5 KHz to 110 KHz ± 5 KHz Product Overall Dimensions 4.91" H x 1.65" W x 2.125" D Weight (Total Product) 0.644 lb (292g) max Operating Temperature 0 to 55 Degrees Celsius Storage Temperature -25 to +75 Degrees Celsius Humidity Up to 90% RH (non-condensing)
|
 - The lyriQ High Performance Keypad takes whole house audio and cranks it up a notch. Perfect for applications requiring superior power and fidelity, the keypad features enhanced performance over the standard lyriQ Keypad. It enables direct selection of the local source, as well as a convenient whole house button. The new keypad includes backlit buttons to indicate unit status, and an RJ45 connection for easy, Cat 5-based installation. Features: Featuring the Studio Design for an enhanced look. Enhanced performance with 20 W per channel (class D) power and active subwoofer support with an 80 Hz low pass filter. Direct selection of local source. Product Specifications Power Requirements +24 Vdc, +0/-6 Vdc, 1500m A max External Power Input +24-30 Vdc Speaker Impedance Load: 6 Ohm max Cat 5 Cable rating Cat 5 UTP, 4 pair solid conductor (24 AWG) Output and Line Out Connection 14-28 AWG Springcon Terminal Block AWG Output Impedance 8 Ohms per channel (1 pair of speakers) Frequency Response 20 - 20,000 Hz ± 1 dB IR Receive Frequency 10 KHz - 110 KHz IR Range On-Axis 25ft Max Overall Dimensions 4.14" H x 1.65" W x 2.25" D (105.2 x 42 x 61.8mm) Operating Temperature 0 to 55 Degrees Celsius Storage Temperature -25 to 75 Degrees Celsius
|
|
|
|
|
|
|
|
|
|
|
|
|
- The lyriQ High Performance Keypad takes whole house audio and cranks it up a notch. Perfect for applications requiring superior power and fidelity, the keypad features enhanced performance over the standard lyriQ Keypad. It enables direct selection of the local source, as well as a convenient whole house button. The new keypad includes backlit buttons to indicate unit status, and an RJ45 connection for easy, Cat 5-based installation. Features: Featuring the Studio Design for an enhanced look. Enhanced performance with 20 W per channel (class D) power and active subwoofer support with an 80 Hz low pass filter. Direct selection of local source. Product Specifications Power Requirements +24 Vdc, +0/-6 Vdc, 1500m A max External Power Input +24-30 Vdc Speaker Impedance Load: 6 Ohm max Cat 5 Cable rating Cat 5 UTP, 4 pair solid conductor (24 AWG) Output and Line Out Connection 14-28 AWG Springcon Terminal Block AWG Output Impedance 8 Ohms per channel (1 pair of speakers) Frequency Response 20 - 20,000 Hz ± 1 dB IR Receive Frequency 10 KHz - 110 KHz IR Range On-Axis 25ft Max Overall Dimensions 4.14" H x 1.65" W x 2.25" D (105.2 x 42 x 61.8mm) Operating Temperature 0 to 55 Degrees Celsius Storage Temperature -25 to 75 Degrees Celsius
|
- When installed with the lyriQ Audio System, the keypad delivers high-quality sound throughout the home and garden. It features enhanced performance with an efficient class D amplifier, as well as convenient backlit buttons to indicate unit status. The new keypad also enables direct selection of the local source, as well as a convenient whole house button and an RJ45 connection for easy Cat 5-based installation. Features: Presented in the elegant Studio Design. Select the local source input directly from the keypad. Integrates with current and future audio systems. Blends seamlessly with additional On-Q Studio products such as Selective Call Intercom, Cameras and LCD Console. Product Specifications Power Requirements +24 Vdc 6 Vdc, 500m A average External Power Input +24-30 Vdc Speaker Impedance Load 4 Ohm max Cat 5 Cable Rating Cat 5 UTP, 4 pair solid conductor (24 AWG) Output and Line Out Connection 14-28 AWG Springcon® Terminal Block AWG Output Impedance 8 Ohms (1 pair of speakers) Frequency Response 20 - 20,000 Hz 2 dB IR Receive Frequency 10 KHz - 110 KHz IR Range On-axis 25ft Max Overall Dimensions 4.14" H x 1.65" W x 2.25" D (105.2x42x61.8mm) Operating Temperature 0 to 55 Degrees Celsius Storage Temperature -25 to 75 Degrees Celsius
|
|
|
|
|
|
|
|
|
|
|
The OnQ legrand HA5201-LA Television Display Interface is a wall-mounted single gang decora style wall plate that displays the OnQ Camera System images or Unity Home Systems graphical user interface via your television display The kit includes an IR targ.
|
|
|
