You are here: Home > Shop Brands > Camden Door Controls > Door Activation Devices > All Active Switches > Double Gang Combo All Active Switches
We found 6 results matching your criteria.
Sort By:
Page of 1
Camden CM-2510 Combination Keyswitch/Push Switch Wheelock MT4-115-WH-VFR - MT4 STROBE HORN 115AC RED

Combination Keyswitch/Push Switch

CAMDEN DOOR CONTROLS CM-2510 Series combination switches are heavyduty, ADA-compliant door controls. The 4 1⁄2 " x 4 1⁄2 " rectangular faceplates are stainless steel or solid brass, and the assembly is designed for easy installation directly on a double gang electric box. The N.O. tubular switch is rated 3AMP @ 120 VAC and provides virtually silent operation. The keyswitch includes a SPST maintained switch standard, rated 6AMP @ 125 VAC.

Camden combination switches are designed for areas where an easy-to-activate, high-visibility switch is desired. Ideal for high-traffic areas, hospitals, handicap access, seniors’ residences, etc. They can be surface or flush mounted.

Camden combination switches are designed to control electric strikes, electromagnetic locks and automatic doors. The keyswitch may be used for “after hours” entry in an apartment application or to turn an automatic door ON/OFF. They may also be used for shunting, bypassing alarms, request to exit, timed functions and many other applications.

The switches are made for high frequency usage for both indoor and outdoor environments. Camden switches are versatile and can be supplied in various configurations and finishes to suit any commercial, industrial or residential application.

All CM-2510 series combination switches are complete ready-to-install assemblies. They are supplied with stainless steel screws and an Allen wrench for mounting. The push switch is momentary N/O while the key switch is maintained. Other switch configurations are also available.

Features:
  • Double gang combo includes SPST maintained key switch (on/off)
  • ADA compliant
  • Minimal actuation force
  • Key switch easily  enables/disables push switch

Description:


The Wheelock Series MT and MT Strobe Multitone electronic appliances offer a choice of eight (8) nationally and internationally recognized alerting sounds: Horn, Bell, March Time Horn, Code-3 Tone, Code-3 Horn, Slow Whoop, Siren or Hi/Lo Tone. The Code-3 Horn and tone patterns are engineered to comply with NFPA/ANSI Temporal Pattern specifications without requiring additional equipment. With MT and MT Strobe appliances, one alarm appliance meets most of your signaling needs. The MT strobes can be synchronized using the Wheelock SM, DSM Sync Modules or the PS-24-8MC Power Supply with the Wheelock patented Sync Protocol.
The MT Strobes are designed for ADA applications while meeting or exceeding the latest requirements of NFPA 72, ANSI 117.1, UFC and UL Standard 1971 as well as meeting ADA requirements concerning photosensitive epilepsy.
Each MT and MT Strobe appliance has two installer selective sound output levels: STANDARD dBA and HIGH dBA. Non-strobe versions provide selectable voltage capability in one unit, 12VDC or 24VDC. Strobe versions are specific for either 12VDC or 24VDC and all models may be used with filtered or unfiltered (full-wave-rectified) input voltages. Separate input terminals are available, shunt wires are provided to enable both tone and strobe to operate simultaneously from a single input.
The Series MT Multitone Strobe appliances are UL Listed for indoor wall mount applications under Standard 1971 for Signaling Devices for the Hearing Impaired and under Standard 464 for Audible Signaling Appliances.

Features:

• Approvals include: UL Standard 1971, UL Standard 464, California State Fire Marshal (CSFM), New York City (MEA), Factory Mutual (FM) and Chicago (BFP) See approvals by model in Specifications and Ordering Information
• Designed to meet or exceed ADA/NFPA/UFC/ANSI Standards and Accessibility Guidelines
• Complies with OSHA 29, Part 1910.165
• Series MT appliances have IN and OUT wiring terminations that accept two #12 to #18 American Wire Gauge (AWG) wires at each terminal. Inputs are polarized for compatibility with standard reverse polarity type supervision
• One alarm appliance with (8) eight selective signals to provide superior sound penetration for various ambient and wall conditions with two field selectable sound output levels
• Code-3 Horn and Tone meet ANSI/NFPA temporal pattern for standard emergency evacuation signaling
• Audible and strobe can operate from a single NAC circuit or from separate NAC circuits with any of the (8) eight audible sounds
• MT Strobe models are available with Wheelock patented MCW Multi-Candela strobes with field selectable c andela settings at 15/30/75/110cd or with single candela 1575cd strobes. The strobes can be synchronized using Wheelock sync modules or power supplies with built in Sync Protocol
• Selectable input voltage on non-strobe versions. Strobe versions are factory set for either 12 or 24VDC, with wide- Listed voltage range, filtered (DC) and FWR
• No additional trimplate required for flush mounting

Wheelock 126264 Horn Strobe 4 Wire 15/20/75/95 Candella Fire Red Wheelock MT-241575W-NW MT Strobe Horn 1575 CD 24 DC White
Review and buy the Wheelock 126264 - HORN STROBE 4 WIRE 15/20/75/95 CANDELLA FIRE RED made by Wheelock in our Audible Strobe Appliances section. Find other Audible Strobe Appliances products at SecurityStoreUSA.com The Wheelock Series MT and MT Strobe Multitone electronic appliances offer a choice of eight (8) nationally and internationally recognized alerting sounds: Horn, Bell, March Time Horn, Code-3 Tone, Code-3 Horn, Slow Whoop, Siren or Hi/Lo Tone. The Code-3 Horn and tone patterns are engineered to comply with NFPA/ANSI Temporal Pattern specifications without requiring additional equipment. With MT and MT Strobe appliances, one alarm appliance meets most of your signaling needs. The MT strobes can be synchronized using the Wheelock SM, DSM Sync Modules or the PS-24-8MC Power Supply with the Wheelock patented Sync Protocol.

The MT Strobes are designed for ADA applications while meeting or exceeding the latest requirements of NFPA 72, ANSI 117.1, UFC and UL Standard 1971 as well as meeting ADA requirements concerning photosensitive epilepsy.

Each MT and MT Strobe appliance has two installer selective sound output levels: STANDARD dBA and HIGH dBA. Non-strobe versions provide selectable voltage capability in one unit, 12VDC or 24VDC. Strobe versions are specific for either 12VDC or 24VDC and all models may be used with filtered or unfiltered (full-wave-rectified) input voltages. Separate input terminals are available, shunt wires are provided to enable both tone and strobe to operate simultaneously from a single input.

The Series MT Multitone Strobe appliances are UL Listed for indoor wall mount applications under Standard 1971 for Signaling Devices for the Hearing Impaired and under Standard 464 for Audible Signaling Appliances.
Wheelock MT-24MCW-AR Horn Strobe 24V With Agent Written Multi CD Red Wheelock MT-24MCW-NW Horn Strobe Multi Candella White 24 VDC No Wording
The Wheelock MT Series Multi-candela Electronic Appliances are audible and visual alarm-indicating devices engineered to comply with temporal pattern specifications without requiring an additional code mechanism. They have a selection of eight tone patterns, two sound output levels, and four light intensities (15 cd, 30 cd, 75 cd, or 110 cd). The temporal (Code-3) horn and tone patterns meet ANSI/NFPA/ISO requirements for standard emergency evacuation signaling. The extended temperature range satisfies all severe-weather outdoor applications. The option to silence the audible signal allows emergency personnel to communicate while maintaining the visual alarm condition, a requirement in some jurisdictions. The Wheelock MT Series Multi-candela Electronic Appliances are audible and visual alarm-indicating devices engineered to comply with temporal pattern specifications without requiring an additional code mechanism. They have a selection of eight tone patterns, two sound output levels, and four light intensities (15 cd, 30 cd, 75 cd, or 110 cd). The temporal (Code-3) horn and tone patterns meet ANSI/NFPA/ISO requirements for standard emergency evacuation signaling. The extended temperature range satisfies all severe-weather outdoor applications. The option to silence the audible signal allows emergency personnel to communicate while maintaining the visual alarm condition, a requirement in some jurisdictions.