You are here: Home > Shop Brands > Leviton > Decora Devices > Switches
We found 13 results matching your criteria.
Sort By:
Page of 2
Wheelock 43T-G10-115-R - 43T BELL 10 INCH RED 115VAC Wheelock 43T-G6-115-R - 43T BELL 6 INCH RED 115VAC
Description
The Wheelock Series 43T bells provide the durable operation and dependable performance required for life safety alarm systems.
A complete range of vibrating models is offered in 6” and 10” sizes for 115 or 24-volt AC operation in indoor or outdoor installations. All models provide high sound output with low power consumption. All models are provided with screw terminal inputs for secure in-out field wiring.

Features
• Approvals include: UL Standard 464, Factory Mutual (FM), California State Fire Marshal (CSFM), New York (MEA) and Chicago (BFP)
• Complies with OSHA 29,Part 1910.165
• High sound output with low current draw
• 6” and 10” shell sizes in 115 or 24 AC models
• Integral RFI suppression minimizes induced noise on alarm lines
• Semi-flush mounting to standard 4” square backboxes or surface mounting to Wheelocks surface backboxes
• Polarized for supervision of alarm lines with screw terminal inputs for fast and secure in-out field wiring of #12 to #18
AWG wire
• Attractive textured finish to enhance appearance and durability
• For combined audible (bell) and visual signaling, convenient retrofit assemblies (Series RSSP) are available with Multi- Candela or single candela strobes


 

Model Number

Shell Size

Input Voltage

Input Current

dBA @

10 Ft.

Mounting

Options *

43T-G6-24-R

6”

24 VAC

0.410

86

D,E,J,K,N,O,P,R,S

43T-G6-24-S

6”

24 VAC

0.410

86

43T-G6-115-R

6”

115 VAC

0.085

86

43T-G6-115-S

6”

115 VAC

0.085

86

43T-G10-24-R

10”

24 VAC

0.410

88

43T-G10-24-S

10”

24 VAC

0.410

88

43T-G10-115-R

10”

115 VAC

0.085

88

43T-G10-115-S

10”

115 VAC

0.085

88

 

 

 		Description
The Wheelock Series 43T bells provide the durable operation and dependable performance required for life safety alarm systems.
A complete range of vibrating models is offered in 6 and 10 sizes for 115 or 24-volt AC operation in indoor or outdoor installations. All models provide high sound output with low power consumption. All models are provided with screw terminal inputs for secure in-out field wiring.

Features
Approvals include: UL Standard 464, Factory Mutual (FM), California State Fire Marshal (CSFM), New York (MEA) and Chicago (BFP)
Complies with OSHA 29,Part 1910.165
High sound output with low current draw
6 and 10 shell sizes in 115 or 24 AC models
Integral RFI suppression minimizes induced noise on alarm lines
Semi-flush mounting to standard 4 square backboxes or surface mounting to Wheelocks surface backboxes
Polarized for supervision of alarm lines with screw terminal inputs for fast and secure in-out field wiring of #12 to #18
AWG wire
Attractive textured finish to enhance appearance and durability
For combined audible (bell) and visual signaling, convenient retrofit assemblies (Series RSSP) are available with Multi- Candela or single candela strobes


 

Model Number

Shell Size

Input Voltage

Input Current

dBA @

10 Ft.

Mounting

Options *

43T-G6-24-R

6”

24 VAC

0.410

86

D,E,J,K,N,O,P,R,S

43T-G6-24-S

6”

24 VAC

0.410

86

43T-G6-115-R

6”

115 VAC

0.085

86

43T-G6-115-S

6”

115 VAC

0.085

86

43T-G10-24-R

10”

24 VAC

0.410

88

43T-G10-24-S

10”

24 VAC

0.410

88

43T-G10-115-R

10”

115 VAC

0.085

88

43T-G10-115-S

10”

115 VAC

0.085

88

 

 
Wheelock 43T-G6-115-S - 43T BELL 6 INCH GRAY 115VAC Wheelock 43T-G6-24-R - 43T BELL 6 INCH RED 24VAC
Description
The Wheelock Series 43T bells provide the durable operation and dependable performance required for life safety alarm systems.
A complete range of vibrating models is offered in 6” and 10” sizes for 115 or 24-volt AC operation in indoor or outdoor installations. All models provide high sound output with low power consumption. All models are provided with screw terminal inputs for secure in-out field wiring.

Features
• Approvals include: UL Standard 464, Factory Mutual (FM), California State Fire Marshal (CSFM), New York (MEA) and Chicago (BFP)
• Complies with OSHA 29,Part 1910.165
• High sound output with low current draw
• 6” and 10” shell sizes in 115 or 24 AC models
• Integral RFI suppression minimizes induced noise on alarm lines
• Semi-flush mounting to standard 4” square backboxes or surface mounting to Wheelocks surface backboxes
• Polarized for supervision of alarm lines with screw terminal inputs for fast and secure in-out field wiring of #12 to #18
AWG wire
• Attractive textured finish to enhance appearance and durability
• For combined audible (bell) and visual signaling, convenient retrofit assemblies (Series RSSP) are available with Multi- Candela or single candela strobes


 

Model Number

Shell Size

Input Voltage

Input Current

dBA @

10 Ft.

Mounting

Options *

43T-G6-24-R

6”

24 VAC

0.410

86

D,E,J,K,N,O,P,R,S

43T-G6-24-S

6”

24 VAC

0.410

86

43T-G6-115-R

6”

115 VAC

0.085

86

43T-G6-115-S

6”

115 VAC

0.085

86

43T-G10-24-R

10”

24 VAC

0.410

88

43T-G10-24-S

10”

24 VAC

0.410

88

43T-G10-115-R

10”

115 VAC

0.085

88

43T-G10-115-S

10”

115 VAC

0.085

88

 

 

 		Description
The Wheelock Series 43T bells provide the durable operation and dependable performance required for life safety alarm systems.
A complete range of vibrating models is offered in 6” and 10” sizes for 115 or 24-volt AC operation in indoor or outdoor installations. All models provide high sound output with low power consumption. All models are provided with screw terminal inputs for secure in-out field wiring.

Features
• Approvals include: UL Standard 464, Factory Mutual (FM), California State Fire Marshal (CSFM), New York (MEA) and Chicago (BFP)
• Complies with OSHA 29,Part 1910.165
• High sound output with low current draw
• 6” and 10” shell sizes in 115 or 24 AC models
• Integral RFI suppression minimizes induced noise on alarm lines
• Semi-flush mounting to standard 4” square backboxes or surface mounting to Wheelocks surface backboxes
• Polarized for supervision of alarm lines with screw terminal inputs for fast and secure in-out field wiring of #12 to #18
AWG wire
• Attractive textured finish to enhance appearance and durability
• For combined audible (bell) and visual signaling, convenient retrofit assemblies (Series RSSP) are available with Multi- Candela or single candela strobes


 

Model Number

Shell Size

Input Voltage

Input Current

dBA @

10 Ft.

Mounting

Options *

43T-G6-24-R

6”

24 VAC

0.410

86

D,E,J,K,N,O,P,R,S

43T-G6-24-S

6”

24 VAC

0.410

86

43T-G6-115-R

6”

115 VAC

0.085

86

43T-G6-115-S

6”

115 VAC

0.085

86

43T-G10-24-R

10”

24 VAC

0.410

88

43T-G10-24-S

10”

24 VAC

0.410

88

43T-G10-115-R

10”

115 VAC

0.085

88

43T-G10-115-S

10”

115 VAC

0.085

88

 

 
Wheelock 43T-G6-24-S - 43T BELL 6 INCH GRAY 24VAC Wheelock CSX10-24-R - EXPLOSION PROOF SINGLE STROKE BELL 24DC RED - INDOOR
Description
The Wheelock Series 43T bells provide the durable operation and dependable performance required for life safety alarm systems.
A complete range of vibrating models is offered in 6” and 10” sizes for 115 or 24-volt AC operation in indoor or outdoor installations. All models provide high sound output with low power consumption. All models are provided with screw terminal inputs for secure in-out field wiring.

Features
• Approvals include: UL Standard 464, Factory Mutual (FM), California State Fire Marshal (CSFM), New York (MEA) and Chicago (BFP)
• Complies with OSHA 29,Part 1910.165
• High sound output with low current draw
• 6” and 10” shell sizes in 115 or 24 AC models
• Integral RFI suppression minimizes induced noise on alarm lines
• Semi-flush mounting to standard 4” square backboxes or surface mounting to Wheelocks surface backboxes
• Polarized for supervision of alarm lines with screw terminal inputs for fast and secure in-out field wiring of #12 to #18
AWG wire
• Attractive textured finish to enhance appearance and durability
• For combined audible (bell) and visual signaling, convenient retrofit assemblies (Series RSSP) are available with Multi- Candela or single candela strobes


 

Model Number

Shell Size

Input Voltage

Input Current

dBA @

10 Ft.

Mounting

Options *

43T-G6-24-R

6”

24 VAC

0.410

86

D,E,J,K,N,O,P,R,S

43T-G6-24-S

6”

24 VAC

0.410

86

43T-G6-115-R

6”

115 VAC

0.085

86

43T-G6-115-S

6”

115 VAC

0.085

86

43T-G10-24-R

10”

24 VAC

0.410

88

43T-G10-24-S

10”

24 VAC

0.410

88

43T-G10-115-R

10”

115 VAC

0.085

88

43T-G10-115-S

10”

115 VAC

0.085

88

 

 

 		Description:
Wheelock’s Series CVX/CSX Explosion-Proof Bells have earned the reputation for rugged, reliable performance over years of service in hazardous environments.
These bells are Listed for service in Division One applications — which means that they are designed to operate safely in atomo¬spheres that actually contain the explosive elements in free form (in contrast to Division Two environments, wherein the explosive elements are stored and protected).

Features:
• Approvals include: UL Standard, New York (MEA)
and California State Fire Marshal (CSFM)
• Rugged cast mechanism enclosure
• Available in single stroke and vibrating models
• Available in 24 VDC and 115 VAC versions
• High sound output with large 10” bell shell
• Outdoor models include protective hood and guard

Indoor Model Number

Order Code

Outdoor Model Number

Order Code

Shell Size

Input Volt.

Input Cur­rent

dBA @ 10 Ft

CSX10-115-R*

4715

CSXG10-115-R*

4929

10”

115VAC

0.125

87

CSX10-115-S*

166

CSXG10-115-S*

167

115VAC

0.125

CSX10-24-R

3582

CSXG10-24-R

3402

24VDC

0.5

CSX10-24-S

164

CSXG10-24-S

196

24VDC

0.5

 
Wheelock CVX10-115-R - EXPLOSION PROOF VIBRATING BELL 115AC RED Wheelock MB-G10-12-S - MB BELL 10 INCH 12 DC GRAY
Description:
Wheelock’s Series CVX/CSX Explosion-Proof Bells have earned the reputation for rugged, reliable performance over years of service in hazardous environments.
These bells are Listed for service in Division One applications — which means that they are designed to operate safely in atomo¬spheres that actually contain the explosive elements in free form (in contrast to Division Two environments, wherein the explosive elements are stored and protected).

Features:
• Approvals include: UL Standard, New York (MEA)
and California State Fire Marshal (CSFM)
• Rugged cast mechanism enclosure
• Available in single stroke and vibrating models
• Available in 24 VDC and 115 VAC versions
• High sound output with large 10” bell shell
• Outdoor models include protective hood and guard

Indoor Model Number

Shell Size

Input Volt.

Input Cur­rent

dBA @ 10 Ft.

CVX10-115-R*

10”

115VAC

0.22

90

CVX10-115-S*

10”

115VAC

0.22

90

 

 		Description
The Wheelock Series MB Motor Bells provide a better engineered motor bell for fire and life safety alarm systems. The Wheelock Series MB Bells include higher dBA, low current draw, built-in trimplate for semi-flush mounting, low frequency aluminum shells, and low RFI noise. The motor for Series MB Bells is a durable, high torque permanent magnet motor selected for its high performance and long life.
These DC vibrating Series MB Motor Bells are offered in 6” and 10” shell sizes in both 12 and 24 VDC models.
Series RSSP Sync/Non-Sync retrofit plates are used in conjunction with the Series MB Motor Bell when combination appliances are required. The Series RSSP retrofit plates are available with either Multi-Candela or single candela strobes and easily mount to a 4” square or Wheelock SBL-2 backbox. All Series RSSP strobe appliances meet or exceed the requirements of NFPA 72 (National Fire Alarm Code), ANSI 117.1 (American National Standard for Accessible and Usable Buildings and Facilities), ADA (Americans with Disabilities Act) and UL Standard 1971 (Signaling Devices for the Hearing Impaired).
The Series RSSP retrofit plates may be synchronized when installed with the Wheelock Series SM, DSM, Sync Modules or the PS-24-8MC Power Supply with Wheelock patented sync protocol. Wheelock synchronized strobes offer an easy way to comply with ADA requirements concerning photo-sensitive epilepsy.

Features
• Approvals include: UL Standard 464, Factory Mutual (FM), Califor nia State Fire Marshal (CSFM), New York (MEA) and Chicago (BFP)
• Meets OSHA 29 Part 1910.165
• High sound output with low current draw
• Low frequency aluminum shells for better audibility through walls, doors and other structures
• 6” and 10” shell sizes in 12 or 24 VDC models
• Integral RFI suppression to minimize included noise on the NAC circuit
• Mounting options for surface, semi-flush, outdoor, and concealed conduit installation
• Built-in trimplate makes semi-flush mounting simpler and less expensive
• Screw terminals permit fast in-out field wiring of #12 to 18 AWG wire
• Polarized for DC supervision of NAC circuits
• Operates on filtered or unfiltered DC
• For combined audible (bell) and visual signaling, convenient retrofit plate assemblies are available with Multi-Candela or Single candela strobes (Refer to Fire Alarm Products Catalog for Series RSSP Sync/Non-Sync Strobes specifications and technical information)

 

Model Number

Shell Size

Input Voltage (VDC)

Average RMS Current

UL Max*

dBA @ 10 Ft.

Mounting Options

MB-G6-12-R

6”

12

0.06

0.09

92

D,E,J,K,N,O,P,R,S

MB-G6-12-S

6”

12

0.06

0.09

MB-G6-24-R

6”

24

0.03

0.04

MB-G6-24-S

6”

24

0.03

0.04

MB-G10-12-R

10”

12

0.06

0.09

MB-G10-12-S

10”

12

0.06

0.09

MB-G10-24-R

10”

24

0.03

0.04

MB-G10-24-S

10”

24

0.03

0.04

 

 
Wheelock MB-G10-24-S - MB BELL 10 INCH 24 DC GRAY Wheelock MB-G6-12-S - MB BELL 6 INCH 12DC GRAY
Description
The Wheelock Series MB Motor Bells provide a better engineered motor bell for fire and life safety alarm systems. The Wheelock Series MB Bells include higher dBA, low current draw, built-in trimplate for semi-flush mounting, low frequency aluminum shells, and low RFI noise. The motor for Series MB Bells is a durable, high torque permanent magnet motor selected for its high performance and long life.
These DC vibrating Series MB Motor Bells are offered in 6” and 10” shell sizes in both 12 and 24 VDC models.
Series RSSP Sync/Non-Sync retrofit plates are used in conjunction with the Series MB Motor Bell when combination appliances are required. The Series RSSP retrofit plates are available with either Multi-Candela or single candela strobes and easily mount to a 4” square or Wheelock SBL-2 backbox. All Series RSSP strobe appliances meet or exceed the requirements of NFPA 72 (National Fire Alarm Code), ANSI 117.1 (American National Standard for Accessible and Usable Buildings and Facilities), ADA (Americans with Disabilities Act) and UL Standard 1971 (Signaling Devices for the Hearing Impaired).
The Series RSSP retrofit plates may be synchronized when installed with the Wheelock Series SM, DSM, Sync Modules or the PS-24-8MC Power Supply with Wheelock patented sync protocol. Wheelock synchronized strobes offer an easy way to comply with ADA requirements concerning photo-sensitive epilepsy.

Features
• Approvals include: UL Standard 464, Factory Mutual (FM), Califor nia State Fire Marshal (CSFM), New York (MEA) and Chicago (BFP)
• Meets OSHA 29 Part 1910.165
• High sound output with low current draw
• Low frequency aluminum shells for better audibility through walls, doors and other structures
• 6” and 10” shell sizes in 12 or 24 VDC models
• Integral RFI suppression to minimize included noise on the NAC circuit
• Mounting options for surface, semi-flush, outdoor, and concealed conduit installation
• Built-in trimplate makes semi-flush mounting simpler and less expensive
• Screw terminals permit fast in-out field wiring of #12 to 18 AWG wire
• Polarized for DC supervision of NAC circuits
• Operates on filtered or unfiltered DC
• For combined audible (bell) and visual signaling, convenient retrofit plate assemblies are available with Multi-Candela or Single candela strobes (Refer to Fire Alarm Products Catalog for Series RSSP Sync/Non-Sync Strobes specifications and technical information)

 

Model Number

Shell Size

Input Voltage (VDC)

Average RMS Current

UL Max*

dBA @ 10 Ft.

Mounting Options

MB-G6-12-R

6”

12

0.06

0.09

92

D,E,J,K,N,O,P,R,S

MB-G6-12-S

6”

12

0.06

0.09

MB-G6-24-R

6”

24

0.03

0.04

MB-G6-24-S

6”

24

0.03

0.04

MB-G10-12-R

10”

12

0.06

0.09

MB-G10-12-S

10”

12

0.06

0.09

MB-G10-24-R

10”

24

0.03

0.04

MB-G10-24-S

10”

24

0.03

0.04

 

 

 		Description
The Wheelock Series MB Motor Bells provide a better engineered motor bell for fire and life safety alarm systems. The Wheelock Series MB Bells include higher dBA, low current draw, built-in trimplate for semi-flush mounting, low frequency aluminum shells, and low RFI noise. The motor for Series MB Bells is a durable, high torque permanent magnet motor selected for its high performance and long life.
These DC vibrating Series MB Motor Bells are offered in 6” and 10” shell sizes in both 12 and 24 VDC models.
Series RSSP Sync/Non-Sync retrofit plates are used in conjunction with the Series MB Motor Bell when combination appliances are required. The Series RSSP retrofit plates are available with either Multi-Candela or single candela strobes and easily mount to a 4” square or Wheelock SBL-2 backbox. All Series RSSP strobe appliances meet or exceed the requirements of NFPA 72 (National Fire Alarm Code), ANSI 117.1 (American National Standard for Accessible and Usable Buildings and Facilities), ADA (Americans with Disabilities Act) and UL Standard 1971 (Signaling Devices for the Hearing Impaired).
The Series RSSP retrofit plates may be synchronized when installed with the Wheelock Series SM, DSM, Sync Modules or the PS-24-8MC Power Supply with Wheelock patented sync protocol. Wheelock synchronized strobes offer an easy way to comply with ADA requirements concerning photo-sensitive epilepsy.

Features
• Approvals include: UL Standard 464, Factory Mutual (FM), Califor nia State Fire Marshal (CSFM), New York (MEA) and Chicago (BFP)
• Meets OSHA 29 Part 1910.165
• High sound output with low current draw
• Low frequency aluminum shells for better audibility through walls, doors and other structures
• 6” and 10” shell sizes in 12 or 24 VDC models
• Integral RFI suppression to minimize included noise on the NAC circuit
• Mounting options for surface, semi-flush, outdoor, and concealed conduit installation
• Built-in trimplate makes semi-flush mounting simpler and less expensive
• Screw terminals permit fast in-out field wiring of #12 to 18 AWG wire
• Polarized for DC supervision of NAC circuits
• Operates on filtered or unfiltered DC
• For combined audible (bell) and visual signaling, convenient retrofit plate assemblies are available with Multi-Candela or Single candela strobes (Refer to Fire Alarm Products Catalog for Series RSSP Sync/Non-Sync Strobes specifications and technical information)

 

Model Number

Shell Size

Input Voltage (VDC)

Average RMS Current

UL Max*

dBA @ 10 Ft.

Mounting Options

MB-G6-12-R

6”

12

0.06

0.09

92

D,E,J,K,N,O,P,R,S

MB-G6-12-S

6”

12

0.06

0.09

MB-G6-24-R

6”

24

0.03

0.04

MB-G6-24-S

6”

24

0.03

0.04

MB-G10-12-R

10”

12

0.06

0.09

MB-G10-12-S

10”

12

0.06

0.09

MB-G10-24-R

10”

24

0.03

0.04

MB-G10-24-S

10”

24

0.03

0.04

 

 
Wheelock MB-G6-24-S - MB BELL 6 INCH 24 DC GRAY Wheelock MB-G6-6-R - MB BELL 6 INCH 6 DC RED
Description
The Wheelock Series MB Motor Bells provide a better engineered motor bell for fire and life safety alarm systems. The Wheelock Series MB Bells include higher dBA, low current draw, built-in trimplate for semi-flush mounting, low frequency aluminum shells, and low RFI noise. The motor for Series MB Bells is a durable, high torque permanent magnet motor selected for its high performance and long life.
These DC vibrating Series MB Motor Bells are offered in 6” and 10” shell sizes in both 12 and 24 VDC models.
Series RSSP Sync/Non-Sync retrofit plates are used in conjunction with the Series MB Motor Bell when combination appliances are required. The Series RSSP retrofit plates are available with either Multi-Candela or single candela strobes and easily mount to a 4” square or Wheelock SBL-2 backbox. All Series RSSP strobe appliances meet or exceed the requirements of NFPA 72 (National Fire Alarm Code), ANSI 117.1 (American National Standard for Accessible and Usable Buildings and Facilities), ADA (Americans with Disabilities Act) and UL Standard 1971 (Signaling Devices for the Hearing Impaired).
The Series RSSP retrofit plates may be synchronized when installed with the Wheelock Series SM, DSM, Sync Modules or the PS-24-8MC Power Supply with Wheelock patented sync protocol. Wheelock synchronized strobes offer an easy way to comply with ADA requirements concerning photo-sensitive epilepsy.

Features
• Approvals include: UL Standard 464, Factory Mutual (FM), Califor nia State Fire Marshal (CSFM), New York (MEA) and Chicago (BFP)
• Meets OSHA 29 Part 1910.165
• High sound output with low current draw
• Low frequency aluminum shells for better audibility through walls, doors and other structures
• 6” and 10” shell sizes in 12 or 24 VDC models
• Integral RFI suppression to minimize included noise on the NAC circuit
• Mounting options for surface, semi-flush, outdoor, and concealed conduit installation
• Built-in trimplate makes semi-flush mounting simpler and less expensive
• Screw terminals permit fast in-out field wiring of #12 to 18 AWG wire
• Polarized for DC supervision of NAC circuits
• Operates on filtered or unfiltered DC
• For combined audible (bell) and visual signaling, convenient retrofit plate assemblies are available with Multi-Candela or Single candela strobes (Refer to Fire Alarm Products Catalog for Series RSSP Sync/Non-Sync Strobes specifications and technical information)

 

Model Number

Shell Size

Input Voltage (VDC)

Average RMS Current

UL Max*

dBA @ 10 Ft.

Mounting Options

MB-G6-12-R

6”

12

0.06

0.09

92

D,E,J,K,N,O,P,R,S

MB-G6-12-S

6”

12

0.06

0.09

MB-G6-24-R

6”

24

0.03

0.04

MB-G6-24-S

6”

24

0.03

0.04

MB-G10-12-R

10”

12

0.06

0.09

MB-G10-12-S

10”

12

0.06

0.09

MB-G10-24-R

10”

24

0.03

0.04

MB-G10-24-S

10”

24

0.03

0.04

 

 

 		Description
The Wheelock Series MB Motor Bells provide a better engineered motor bell for fire and life safety alarm systems. The Wheelock Series MB Bells include higher dBA, low current draw, built-in trimplate for semi-flush mounting, low frequency aluminum shells, and low RFI noise. The motor for Series MB Bells is a durable, high torque permanent magnet motor selected for its high performance and long life.
These DC vibrating Series MB Motor Bells are offered in 6” and 10” shell sizes in both 12 and 24 VDC models.
Series RSSP Sync/Non-Sync retrofit plates are used in conjunction with the Series MB Motor Bell when combination appliances are required. The Series RSSP retrofit plates are available with either Multi-Candela or single candela strobes and easily mount to a 4” square or Wheelock SBL-2 backbox. All Series RSSP strobe appliances meet or exceed the requirements of NFPA 72 (National Fire Alarm Code), ANSI 117.1 (American National Standard for Accessible and Usable Buildings and Facilities), ADA (Americans with Disabilities Act) and UL Standard 1971 (Signaling Devices for the Hearing Impaired).
The Series RSSP retrofit plates may be synchronized when installed with the Wheelock Series SM, DSM, Sync Modules or the PS-24-8MC Power Supply with Wheelock patented sync protocol. Wheelock synchronized strobes offer an easy way to comply with ADA requirements concerning photo-sensitive epilepsy.

Features
• Approvals include: UL Standard 464, Factory Mutual (FM), Califor nia State Fire Marshal (CSFM), New York (MEA) and Chicago (BFP)
• Meets OSHA 29 Part 1910.165
• High sound output with low current draw
• Low frequency aluminum shells for better audibility through walls, doors and other structures
• 6” and 10” shell sizes in 12 or 24 VDC models
• Integral RFI suppression to minimize included noise on the NAC circuit
• Mounting options for surface, semi-flush, outdoor, and concealed conduit installation
• Built-in trimplate makes semi-flush mounting simpler and less expensive
• Screw terminals permit fast in-out field wiring of #12 to 18 AWG wire
• Polarized for DC supervision of NAC circuits
• Operates on filtered or unfiltered DC
• For combined audible (bell) and visual signaling, convenient retrofit plate assemblies are available with Multi-Candela or Single candela strobes (Refer to Fire Alarm Products Catalog for Series RSSP Sync/Non-Sync Strobes specifications and technical information)

 

Model Number

Shell Size

Input Voltage (VDC)

Average RMS Current

UL Max*

dBA @ 10 Ft.

Mounting Options

MB-G6-12-R

6”

12

0.06

0.09

92

D,E,J,K,N,O,P,R,S

MB-G6-12-S

6”

12

0.06

0.09

MB-G6-24-R

6”

24

0.03

0.04

MB-G6-24-S

6”

24

0.03

0.04

MB-G10-12-R

10”

12

0.06

0.09

MB-G10-12-S

10”

12

0.06

0.09

MB-G10-24-R

10”

24

0.03

0.04

MB-G10-24-S

10”

24

0.03

0.04

 

 
   
 
 
 

Enter your email for a chance to WIN $100 Amex Gift Card.

Please Enter Your Email Address

*One entry per household please