You are here: Home > Shop Brands > Pelco > Pelco CCTV Cameras & Lens Equipment > Camera Systems > Camclosure Integrated Camera Systems > ICS090 Series Camclosure Camera System
We found 16 results matching your criteria.
Sort By:
Page of 2
Fire-Lite MS-2 Two Zone Control Panel Fire-Lite MS-4 Four Zone Control Panel 4-Zone, 24 VDC
Two-zone conventional FACP; 120 VAC, 50/60Hz, 2.3 A.

The Fire-Lite MS-2 and MS-2E Fire Alarm Control Panels bring the latest in microprocessor technology to conventional fire controls. The MS-2 is compatible with the new i³ smoke detectors from System Sensor, and provides such advanced features as drift compensation, maintenance alert, and freeze warning. Automatic synchronization of audio/visual devices is provided, using three selections for manufacturer protocol. The NAC protocol includes the ability to silence audible devices while strobes continue to flash, using only a single pair of wires. The MS-2 also is compatible with conventional input devices such as two- and four-wire smoke detectors, pull stations, waterflow devices, tamper switches and other normally- open contact devices. For 240 VAC operation, order MS-2E. See the Fire•Lite Device Compatibility Document 15384 for a complete list of compatible devices. NOTE: Unless indicated otherwise, the term “MS-2” refers to both MS-2 and MS-2E models.

FEATURES
• Two Style B (Class B) IDCs (Initiating Device Circuits).
• One Style Y (Class B) NAC (Notification Appliance Circuit).
• 24 VDC.
• i³ Technology features:
— Drift compensation automatically adjusts detector sensitivity and increases resistance to false alarms caused by dust accumulation.
— Maintenance Alert LEDs (per zone) warn of excessive dirt accumulation, preventing false alarms (meets NFPA 72 requirements).
— Detector sensitivity is automatically measured by the detector, which automatically adjusts its sensitivity back to the factory settings when it becomes more sensitive due to contaminants settling in the chamber.
— Wireless handheld sensitivity meter eliminates the need for voltmeters, magnets and a physical connection to the detector. The reader displays sensitivity in terms of percent per foot obscuration and provides text status indication.
— Supervisory LED (per zone) provides warning if a detector senses temperature approaching freezing.
— Special test protocol and LED indication allows quick test of all detectors without need for a ladder.
• NAC synchronization features:
— Provides synchronization of standard ANSI audible signals as required by NFPA 72.
— Provides synchronization of ADA compliant strobes per NFPA 72.
— Selectable for System Sensor, Wheelock and Gentex protocols.
— Selective Silence feature allows manual silence of horns while strobes continue to flash on the same NAC.
• Silent or Audible Walk Test operation mode commanded from the front keypad, with automatic return to normal after one hour of inactivity.
• Alarm verification selectable per zone.
• Each zone may be programmed for supervisory or fire, with separate red and yellow LEDs.
• Disable switches provided per zone.
• NACs programmable for:
— Silence Inhibit
— Auto Silence
— Strobe Synchronization
— Selective Silence (horn-strobe mute)
— Temporal or Steady signal
— Silenceable or Nonsilenceable
• Form-C Alarm and Trouble relays.
• 3.0 amps total usable current.
• Optional dress panel (P/N DP-MS2/4).

REPLACES FL-MS4424

GENThe Fire•Lite MS-4 and MS-4E Fire Alarm Control Panels
 bring the latest in microprocessor technology to conventional fire controls. The MS-4 is compatible with the i³™ smoke detectors from System Sensor, and provide such advanced features as drift compensation, maintenance alert, and freeze warning. Automatic synchronization of audio/visual devices is provided, using three selections for manufacturer protocol. The NAC protocol includes the ability to silence audible devices while strobes continue to flash, using only a single pair of wires.

The MS-4 also is compatible with conventional input devices such as two- and four-wire smoke detectors, pull stations, waterflow devices, tamper switches and other normally-open contact devices. For 240 VAC operation, order MS-4E. See the Fire•Lite Device Compatibility Document 15384 for a complete list of compatible devices. NOTE: Unless indicated otherwise, the term “MS-4” refers to both MS-4 and MS-4E models.

FEATURES
• Four Style B (Class B) IDCs (Initiating Device Circuits).
• Two Style Y (Class B) NACs (Notification Appliance Circuits).
• Optional module that converts all four IDCs and two NACs
to Class A.
• 24 VDC.
• i³™ Technology features:
— Drift compensation automatically adjusts detector sensitivity and increases resistance to false alarms caused by dust accumulation.
— Maintenance Alert LEDs (per zone) warn of excessive dirt accumulation, preventing false alarms (meets NFPA 72 requirements).
— Detector sensitivity is automatically measured by the detector, which automatically adjusts its sensitivity back to the factory settings when it becomes more sensitive due to contaminants settling in the chamber.
— Wireless hand-held sensitivity meter eliminates the need for voltmeters, magnets and a physical connection to the detector. The reader displays sensitivity in terms of percent per foot obscuration and provides text status indication.
— Supervisory LED (per zone) provides warning if a detector senses temperature approaching freezing.
— Special test protocol and LED indication allows quick test of all detectors without need for a ladder.
• NAC synchronization features:
— Provides synchronization of standard ANSI audible signals as required by NFPA 72.
— Provides synchronization of ADA compliant strobes per NFPA 72.
— Selectable for System Sensor, Wheelock and Gentex protocols.
— Selective Silence feature allows manual silence of horns while strobes continue to flash on the same NAC.
• Silent or Audible Walk Test operation mode commanded from the front keypad, with automatic return to normal after one hour of inactivity.
• Programmable for combination tamper supervisory monitor and waterflow alarm on one zone.
• Alarm verification selectable per zone.
• Each zone may be programmed for supervisory or fire, with separate red and yellow LEDs.
• Disable switches provided per zone.
• NACs programmable for:
— Silence Inhibit
— Auto Silence
— Strobe Synchronization
— Selective Silence (horn-strobe mute)
— Temporal or Steady signal
— Silenceable or Nonsilenceable
• Form-C Alarm, Trouble and Supervisory relays.
• 3.0 A total usable current.
• 6.0 A total usable current available with optional second transformer.
• Optional dress panel (P/N DP-MS2/4).

REPLACES FL-MS4424 FL-MS4424B

Fire-Lite MS-5UD-3 Five Zone Fire Alarm Control Panel FireLite MS-9050UD 50-Point Intelligent Addressable Fire Alarm Control Panel

Fire-Lite MS-5UD-3 Five Zone Fire Alarm Control Panel


List Price: $699.95

Our Price : $621.99

You save $77.96!
UL 9th Edition Listed Panel Ideal for Small Applications Replaces MS-5012, MS-5024, MS-5024UD, MS-2410B and the MS-5210UD

Sophisticated Performance at Low Cost

The new Fire-Lite MS-5UD-3, five zone, and MS-10UD-7, ten zone, conventional fire control panels have features normally found in more expensive addressable systems.

Key features include:

  • Built-in keypad and 80 character LCD display; no need for external programmer
  • Compatible with the i3 smoke detectors from System Sensor
  • On-board digital communicator & removable terminals
  • Built-in library for zone labeling
  • New low-cost ANN-Bus annunciators
  • Simplified testing and maintenance
  • Programmable NACS with built-in sync for System Sensor, Wheelock, Gentex, Federal Signal, and Amseco devices

    FL-MS5UD3 / MS-5UD-3: Five-zone, 24-volt Fire Alarm Control Panel (includes backbox, FLPS-3 power supply, technical manual, and a frame & post operating instruction sheet).

  • The MS-9050UD Fire Alarm System offers easy installation, operation, and maintenance. The MS-9050UD is suited for stand-alone applications for smaller facilities such as apartment complexes, banks, cinemas, child care, department stores, food stores, places of worship, restaurants, small retail outlet stores, and other facilities requiring performance-based, sophisticated technology at reasonable cost.

    Sophisticated Performance at the Cost of a Conventional System.
    The MS-9050UD Fire Alarm Control Panel offers state-of-the-art technology with easy installation, operation, and maintenance. Suited for stand-alone applications, the MS-9050UD is ideal for smaller facilities such as apartment complexes, banks, cinemas, child care and elementary schools, department stores, food stores, places of worship, restaurants, small retail outlet stores, and other facilities requiring performance-based, sophisticated technology at reasonable cost.

    With capabilities such as remote upload/download programming and diagnostics, addressable point identification, drift compensation, built-in digital communication, and NAC synchronization, the MS-9050UD delivers features typically found only in more expensive, larger systems.

    High Performance with Remarkable Flexibility.
    The panel supports a wide range of addressable sensors, control outputs, and notification devices capable of meeting the most challenging design specifications. With support for up to 50 addressable points of any type on a single SLC loop, the MS-9050UD provides advanced addressable features at a price that competes with conventional systems.

    With an integrated Digital Alarm Communicator Transmitter (DACT) for off-premises monitoring and remote Upload/Download programming support, the MS-9050UD is a compact Fire Alarm Control Panel that provides large system technology with remarkable flexibility.

    Features
    • Low-cost, 50-point addressable FACP competes with conventional systems, and includes superior device identification
    • Easy to use and very intuitive. Allows programming without any additional hardware required and follows same model of programming found in larger Fire-Lite systems to eliminate learning curve.
    • Built-in programmable synchronization conforms to present day code requirements without need for additional hardware or labor.
    • Permits upload/download of system programming information as well as verification of system parameters, including detector sensitivity without having to leave your office.
    FireLite MS-9200UDL 198-Point Addressable Fire Alarm Control Panel Fire-Lite ACC-25/50 EVAC - Audio Command Center / Emergency Voice Evacuation Control Panel
  • Single SLC provides support for 198 addressable devices on twisted, unshielded fire wire
  • Built-in digital communicator for off-premises monitoring and remote up/download
  • 4 NACs with built-in synchronization for Gentex System Sensor and Wheelock
  • ACC-25/50: 25 watt, 25 VRMS, emergency Voice Evacuation Control Panel (VECP) with integral commercial microphone, digital message generator, and single-/dualchannel Class A or Class B speaker circuits.

    The Fire-Lite AUDIO-COMMAND-CENTER-25/50 (ACC-25/50) is a state-of-the-art, single- or dual-circuit (25 watts each) Emergency Voice Evacuation Control Panel (EVAC). The ACC-25/50 provides the ability to record five field-programmable messages (up to 60 seconds total message duration) with an integral commercial-grade emergency communications microphone or from an external audio source.

    Significant technological enhancements set the ACC-25/50 apart from other EVAC panels — these include full supervision in both active (alarm or music) and standby conditions, supervision of amplifier outputs, field wiring, message generator, all tone generators, and the microphone. The integral power supply is capable of charging up to 18 AH batteries, which can be housed in the ACC-25/50 cabinet.

    The ACC-25/50 is suitable for use as an adjunct (slave or stand-alone) to most UL-Listed Fire Alarm Control Panels (FACPs). An optional 25 watt, 25 VRMS audio amplifier is available for system expansion to 50 watts (providing dual 25-watt speaker circuits) or as a secondary amplifier in jurisdictions requiring such backup. A 70.7 VRMS converter is also available for independently converting amplifiers to meet retrofit needs. A host of field-programming options, including the capability of five custom messages (fire, tornado, evacuation, hazmat, non-fire, multi-language, etc.) make the ACC-25/50 the most versatile voice evacuation system available.

    Some Suitable Applications:
    Schools Auditoriums Dormitories Theatres
    Restaurants Places of Worship Lodging
    Office Buildings Factories

    STANDARD FEATURES
    • Integral 25 watt, 25 VRMS audio amplifier with single Style Z (Class A) or Style Y (Class B) speaker circuit (expandable to 50 watts using the ACC-AAM25).
    • Modular design for maximum system flexibility and ease of service.
    • Five Command Input Circuits (CMD) are available for activation by an FACP.
    • Two command input circuits can be independently field programmed for activation by a Notification Appliance Circuit (NAC) or contact closure.
    • Three command input circuits activate on contact closure.
    • Manual deactivation of speaker zones.
    • Command inputs allow:
    – One 60-second message.
    – Two 30-second messages.
    – Three 20-second messages.
    – Four 15-second messages.
    – Five 12-second messages.
    • Microphone time-out feature.
    • Nineteen different system and diagnostic LEDs.
    • Two Form-C trouble relays (System & AC Power Loss).
    • Optional equipment: second amplifier; local playback speaker; and remote microphone.
    • Integral digital message generator with standard, factory- prerecorded emergency evacuation message.

    Fire-Lite ACC-25/50ZS EVAC - Audio Command Center 25/50 Zone Splitter Voice Evacuation Control Panel
    ACC-25/50ZS: 25 watt, 25 VRMS, emergency Voice Evacuation Control Panel (VECP) with integral commercial microphone, digital message generator, zone splitter module (ACCZSM), zone page module with keypad (ACC-ZPMK).

    The Audio Command Center-25/50 Zoned System (ACC-25/50ZS) is a state-of-the-art Emergency Voice Evacuation
    Panel (EVAC) capable of splitting 25 or 50 watts of audio power into up to eight speaker circuits (i.e., zones). The ACC-25/50ZS provides the ability to record five field-programmable messages (up to 60 seconds total message duration) with an integral commercial-grade emergency communications microphone or from an external audio source. Significant technological enhancements set the ACC-25/50ZS apart from other EVAC panels these include full supervision in both active alarm and standby conditions, supervision of amplifier outputs, field wiring, message generator, all tone generators, and the microphone. The integral power supply is capable of charging up to 18 AH batteries, which can be housed in the ACC-25/50ZS cabinet.

    The ACC-25/50ZS is suitable for use as an adjunct (slave or stand-alone) to most UL-Listed Fire Alarm Control Panels (FACPs). An optional 25 watt, 25 VRMS audio amplifier is available for system expansion to 50 watts or as a secondary amplifier in jurisdictions requiring such backup. A 70.7 VRMS converter is also available for independently converting amplifiers to meet retrofit needs.

    The Zone Splitter Module (ACC-ZSM) divides the output of the Audio Amplifier Module(s) (ACC-AAM25) into up to eight speaker circuits (i.e., zones). The Zone Page Module with Keypad (ACC-ZPMK) provides full manual control of the speaker circuits, status indication of each of the speaker circuits, and automatic control by the FACP via the ACS serial link connection on the MS-9200UD and MS-9600 Addressable Panels. A host of field-programming options, including the capability of five custom messages (fire, tornado, evacuation, hazmat, nonfire, multi-language, etc.) make the ACC-25/50ZS the most versatile voice evacuation system available.

    Some Suitable Applications:

    1. Schools
    2. Auditoriums
    3. Dormitories
    4. Theatres
    5. Restaurants
    6. Places of Worship
    7. Lodging
    8. Office Buildings
    9. Factories

    STANDARD FEATURES
    25 watts of audio power can be divided into eight Style Y (Class B) or four Style Z (Class A) speaker circuits (zones), utilizing the zone splitter module (ACC-ZSM).
    Full manual control of all audio zones provided by zone page module with keypad (ACC-ZPMK).
    Activation by the FACP using the ACS serial link and/or the five Command (CMD) inputs.
    ACS serial link compatible with all FireLite FACPs, depending on function.
    FACP automatically directs the voice message to each or all audio zones.
    Paging by zone or All-Call.
    Full status indication (normal, active, fault) of each speaker circuit.
    Fault indication via ACS serial link and/or the two Form-C trouble relays (System and AC Power Loss).
    Integral 25 watt, 25 VRMS audio amplifier with single Style Z (Class A) or Style Y (Class B) speaker circuit (expandable to 50 watts using the ACC-AAM25).
    Modular design for maximum system flexibility and ease of service.
    Two command input circuits can be independently field-programmed for activation by a Notification Appliance Circuit (NAC) or contact closure.
    Three command input circuits activate on contact closure.

    MS4 REPLACEMENT BOARD
    FIRE-LITE ALARMS - U.S.
    HAI 17A00-9 16 Zone / 16 Output Expansion Board HAI 38A00-1CS UPB Room Controller 6 Button HLC - Case of 12
    The Model 17A00-9 Expansion Board adds sixteen voltage outputs for control and sixteen inputs for additional security/fire zones, auxiliary or temperature inputs. The 17A00-9 can be mounted up to 1000 feet from the main controller and requires its own power supply and battery. It reduces wiring use in larger installations. It is commonly used for sprinkler systems, control of pumps, motors, remote control circuit breakers, and additional security/fire zones. Control all lights in a room or area. Lights may be turned on or off, dimmed, brightened, and set to four different scenes. Setting a scene is as simple as pressing the scene button on the Scene Switch five times. Has infrared receiver for use with Scene Switch Remote Control. Includes White bezel, connectors, instructions. Color Change Kit and custom engraving available.
    HAI 38A00-2 UPB House Controller 8 Button HLC - Sold in Orders of 12 Only Wheelock A84337-001 Microphone Assembly For Voice Evacuation
    A House Controller acts as the master lighting control that shows the status for up to eight rooms. If any light is on in one of its rooms, the button for that room is illuminated. Pressing the House Controller button will turn all of the lights in that room on or off. The buttons may be custom laser engraved with their room names using HAI Part Number 38A06-2. The default color for a House Controller is White. House Controller Switch Color Change Kits (HAI Part Number 38A05-color code) are available in White (WH), Almond (AL), Black (BL), Ivory (IV), Brown (BR), and Grey (GR) colors. House Controllers may be used in an Omni family or Lumina family home control system as part of sophisticated lighting control. Adding a home control system gives you the ability to change your light settings by the time of day, a set schedule, by the triggering of events (including motion), via a telephone call, or by a computer connected to the Internet.

    Specifications:

    HAI Product No.: 38A00-2
    Dimensions: 4.1" x 1.7" x 1.5"
    Weight: 0.25 lb.
    Backlit Pushbuttons with LED Indicators: 8
    Connections: 18 GA
    Mounting: Standard J box
    Input Power: 120 ± 12 VAC
    Input Frequency: 60 ± 3 Hz
    UPB Transmission Attempts: 2
    Operating Temperature: -40° F to 104° F
    Approvals: UL listed
    Review and buy the Wheelock A84337-001 - Microphone Assembly For Voice Evacuation made by Wheelock in our Catalog section. Find other Catalog products at SecurityStoreUSA.com
       
     
     
     

    Enter your email for a chance to WIN $100 Amex Gift Card.

    Please Enter Your Email Address

    *One entry per household please