You are here: Home > Shop Brands > Leviton > Home Controls > Receivers
We found 14 results matching your criteria.
Sort By:
Page of 2
3M Macurco GD-21 Combustible Gas Detector FireLite MS-9050UDK 50-Point Fire Alarm Control Panel Kit with 2 Pull Stations & 12 Smokes
Special Order Item Macurco GD Series is built to order by Macurco, the lead time is 10 business days
General Information
The GD-21 is a 120VAC plug in type unit, with a self-contained alarm. The standard calibration is to 25% of LEL (Lower Explosive Level) of a mixture of Methane (natural gas) and air. The GD-21 will alarm at about 25% of LEL of Propane, Butane and LP Gas.

To detect the complete list of gases on the data sheet will normally require a special calibration, for a nominal charge. However, the following gases can be detected with the standard calibration: Acetylene, Gasoline fumes and Lacquer thinners. See the GD-21 data sheet for a list of other gases that can be detected, and other technical information.

Location
The unit on average can cover about 900 sq. ft. The coverage depends on air movement in the room or facility. Locate the unit high if the gas of concern is lighter than air, such as natural gas (methane). If the gas of concern is heavier than air; such as butane, propane, alcohols or gasoline; mount the detector relatively low. Extra detectors may be needed near any areas were people work or the air is stagnant.

The location selected should not be near a corner, as this can be dead air space. The location selected must also have a 120 VAC power outlet within nine feet. It is not suggested to locate gas detectors in kitchens or bathrooms, because of frequent unwanted alarms due to the normal use in those rooms of products containing combustible gases.

Features
  • Detects many combustible gases: Natural Gas, LP, Propane, Butane, and Gasoline Fumes.
  • Standard Calibration setting is 25% of LEL (Lower Explosive Limit) for natural gas.
  • Loud 85 dB Alarm (similar to a smoke alarm buzzer) wakes even heavy sleepers
  • Stand Alone Unit: Plug into any 120 VAC power outlet.
  • Ignition protected: Explosion Proof Design.
  • Maintenance free electronic sensor, supervised.
  • Small, compact, attractive white case.
  • Easy to install: Just hang unit on a screw or nail, and plug it in.
  • Special calibrations are available.

    Specifications
  • POWER: 120 VAC, 60 Hz
  • CURRENT: Less than 10 watts
  • SHIPPING WEIGHT: 1 lb
  • COLOR: White
  • ALARM SOUND: 88 dB @ 10 ft
  • ALARM SET POINT: 25% of LEL natural gas
  • SENSOR MAINTENANCE: none
  • SENSOR LIFE: 7 – 10 years
  • SIZE: 4¼ x 3½ x 1¾ inches
  • Kit contains:
  • 1 x FL-MS9050UD Fire Alarm Control Panel
  • 2 x FL-BG12LX Addressable Pull Stations
  • 12 x FL-SD355 Addressable Smoke Detectors

    The MS-9050UD Fire Alarm System offers easy installation, operation, and maintenance. The MS-9050UD is suited for stand-alone applications for smaller facilities such as apartment complexes, banks, cinemas, child care, department stores, food stores, places of worship, restaurants, small retail outlet stores, and other facilities requiring performance-based, sophisticated technology at reasonable cost.

    Sophisticated Performance at the Cost of Conventional System. The MS-9050UD Fire Alarm Control Panel offers state-of-the-art technology with easy installation, operation, and maintenance. Suited for stand-alone applications, the MS-9050UD is ideal for smaller facilities such as apartment complexes, banks, cinemas, child care and elementary schools, department stores, food stores, places of worship, restaurants, small retail outlet stores, and other facilities requiring performance-based, sophisticated technology at reasonable cost. With capabilities such as remote upload/download programming and diagnostics, addressable point identification, drift compensation, built-in digital communication, and NAC synchronization, the MS-9050UD delivers features typically found only in more expensive, larger systems.

    High Performance with Remarkable Flexibility. The panel supports a wide range of addressable sensors, control outputs, and notification devices capable of meeting the most challenging design specifications. With support for up to 50 addressable points of any type on a single SLC loop, the MS-9050UD provides advanced addressable features at a price that competes with conventional systems. With an integrated Digital Alarm Communicator Transmitter (DACT) for off-premises monitoring and remote Upload/Download programming support, the MS-9050UD is a compact Fire Alarm Control Panel that provides large system technology with remarkable flexibility.

    Features
    • Low-cost, 50-point addressable FACP competes with conventional systems, and includes superior device identification
    • Easy to use and very intuitive. Allows programming without any additional hardware required and follows same model of programming found in larger Fire-Lite systems to eliminate learning curve.
    • Built-in programmable synchronization conforms to present day code requirements without need for additional hardware or labor.
    • Permits upload/download of system programming information as well as verification of system parameters, including detector sensitivity without having to leave your office.

  • HAI 10A11-1 Two-Way Audio/Voice Alarm Module Leviton 6371I DHC 20 Amp, 250 Volt AC 60Hz, Double-Pole, Switch Receiver with , 1-Way Communication, Ivory
    The Model 10A11-1 Two-Way Audio/Voice Alarm Module allows two-way communication with a central station after an alarm, paging and listening from an on-premises or remote phone, annunciation of alarm and zone by voice, and voice messaging (not available on all systems). After an audible alarm, the module allows the central station to control the listen/talk mode. After a silent alarm, the module allows listen in only. Use with HAI Part Number 33A00-4 Omni Console with Built-In Speaker/Microphone, 33A00-20 Lumina Keypad with Built-In Speaker/Microphone, 28A00-1 Surface Speaker Microphone, or 28A00-2 Flush Speaker Microphone. The Model 10A11-1 may be used with Lumina, Lumina Pro, Omni LT, Omni, Omni II, Omni IIe, OmniPro and OmniPro II home control systems.

    Specifications:

    HAI Product No.: 10A11-1
    Dimensions: 6.75" x 3.25" x 1"
    Operating Voltage: 6 to 14 VDC
    Operating Current: 500 mA maximum
    Speaker Impedance: 8 ohm
    AGC Range: -22 dbm to +10 dbm
    Required Microphone Type: Condenser with built-in preamp
    DHC 20 Amp, 250 Volt AC 60Hz, Double-Pole, Switch Receiver with , 1-Way Communication, - Ivory
    Leviton 6386 Signal Test Receiver Leviton HXP151TW DHC 15 Amp, 120 Volt, NEMA 5-15R, Scene-Capable Plug-In Appliance Module Receiver, 2-Way Communication - White
    Measures command signal strength at individual module locations. Minimum signal strength required for proper DHC powerline carrier component operation is 100mV. For use with 6385 Signal Strength Indicator. The Decora Home Controls (DHC) Plug-in Appliance Receiver Module is ideal for any residential setting where ON/OFF switching of appliances, motors up to 1/2 HP, or free-standing lights, including incandescent, magnetic low-voltage, fluorescent and compact fluorescent loads is needed.

    Typical applications include switching of coffee/espresso makers, toasters and toaster ovens, stereos, TV’s, VCRs, fans and dehumidifiers. The HXP15-1TW Module also allows users to remotely turn ON/OFF free-standing lamps and incorporate them into scene lighting control applications.

    The HXP15-1TW utilizes existing 60Hz 120V AC house wiring for “No New Wires” installation. Leviton DHC products use the home’s power wiring to transmit command and control signals, providing networked home controls systems without the need for additional wiring to be present.

    FEATURES AND BENEFITS
  • Provides 15A-125V NEMA 5-15R grounding receptacle for use with a wide variety of lamps and appliances
  • Rated 1800W Incandescent, 1800VA Fluorescent, 15A Resistive and 1/2 HP Motor loads @ 125V AC
  • New One-Button Programming through address capturing for easy programming
  • Provides manual and remote ON/OFF switching of connected loads
  • 2-Way Communication with status-tracking-capable Controllers and Programmers when it is switched ON or OFF locally.
  • Provides Scene Control ON/OFF switching capability when used with the HCCS7-1TW DHC Seven-Scene Controller and the HCCPG-1TW DHC Toscana® Deluxe Programmer
  • Protected memory maintains ON/OFF status of connected loads and address programming during minor power fluctuations
  • Leviton’s patented Intellisense™ Technology greatly improves reliability and reduces false responses compared to other manufacturers’ products by virtually eliminating signal problems due to noise.
  • LED locator light
  • Button for ON/OFF manual control
  • Quiet relay switching
  • Macurco CM-S1 Fixed Carbon Monoxide Detector for Fire & Security Systems UL Listed Macurco CMP 12 VAC Transformer for GD2A Gas Detector
    Carbon monoxide fixed gas detector CM-S1 offers flush or surface mount options, 12-24 VDC operation, N.O. or N.C. alarm relay, visual display, and 85db buzzer. CM-S1 is MEA-approved and UL Listed to UL 2075.

    UL Listed to UL 2075 for use with systems. Flush mount, 12-24 VDC operation, N.O. or N.C. alarm relay, visual display, 85db Buzzer.

    CM-S1
    • SPDT alarm relay
    • LED for operating status
    • 12-24 VDC Power
    • Flush or surface mount
    • Long life sensor
    • All units individually calibrated

    FEATURES
    • Listed to UL Standard 2075 for carbon monoxide detectors.
    • Tested to UL Standard 2034 for carbon monoxide detectors.
    • Surface mounts to a wall using the supplied enclosure rear housing.
    • Flush mounts in a 2 X 4 (1-1/2 inch deep minimum ) single gang switch, or handy electrical box.
    • Small, low profile, attractive unit in a white plastic case.
    • Detector alarms at multiple levels of exposure to carbon monoxide based on time weighted averages of the gas present.
    • Inexpensive, easy to install. Microcomputer control allows mostly automatic operation.
    • Test & Reset switch conducts internal tests and actuates alarm relay.
    • Visual display: GREEN - Normal operation. FLASHING AMBER - Trouble Contact your installer or Macurco Tech Support RED - Danger! Move to fresh air (hazardous condition is present.)
    • Solid state sensor. No maintenance or periodic sensor replacement needed.
    • SPDT Relay to connect to Alarm Control Panels or switch external alarm devices.
    • Buzzer: Produces repeating loud tone bursts during alarm, and chirps if sensor trouble is found.

    Designed for residential and commercial use, the Macurco CM-S1 delivers unparalleled ease of installation with a simple three-step Speed Mount™ system and compatibility with both 12-volt security systems and 24-volt fire alarm systems. At Macurco, it’s simply the latest round of innovations that have made us the leader in our industry since 1972. When you turn to Macurco, you get the expertise of industry pioneers who have helped change the face of fixed gas detection and ventilation control equipment. Add the CM-S1, and you’ve added serious technology from visionaries collaborating under one roof to design, manufacture, test and distribute Macurco innovations. A phone call to Macurco is a direct line to engineers, assembly technicians and testing professionals who are ready to assist you to make your project a success. We manufacture all our units to strict quality standards. Each is 100 percent assembled, calibrated and tested from our headquarters in the greater Denver area. Today, Macurco supplies the finest gas detection devices to a range of industries, including Fire & Security, HVAC, Propane, Alternative Fuel and Telecommunications, for the most important projects anywhere. Namely, yours.

    Macurco CMP 12V Transformer for GD2A Gas Detector
    Wheelock 100524 - PULL STATION NORMALLY CLOSED CONTACT Wheelock 109215002 - PULL STATION BREAK GLASS CALL POINT EXPLOSION PROOF

    Wheelock 100524 - PULL STATION NORMALLY CLOSED CONTACT

    Wheelock 109215002 - PULL STATION BREAK GLASS CALL POINT EXPLOSION PROOF

    Wheelock MPS-100 Pull Station SPST Single Action Key Wheelock MPS-200 Pull Station SPST Double Action Key
    Wheelock Series MPS non-codes Manual Pull Stations are constructed of high quality, die-cast metal for long lasting performance and may be mounted on a single gang backbox.

    Available in either single or dual action configurations for indoor or outdoor use with SPST contacts and terminal strip connections. The normally open contact will close when the pull station is activated and is rated for 30VDC @ 1 amp and/or 120 VAC @ 1 amp. The contacts are gold plated to avoid the risk of corrosion.
    Wheelock Series MPS non-coded Manual Pull Stations are constructed of high quality, die-cast metal for long lasting performance and may be mounted on a single gang backbox.

    Available in either single or dual action configurations for indoor or outdoor use with SPST contacts and terminal strip connections. The normally open contact will close when the pull station is activated and is rated for 30 VDC @ 1 amp and/or 120 VAC @ 1 amp. The contacts are gold plated to avoid the risk of corrosion.

    The single action explosion-proof model Series MPS-400X is UL Listed and Factory Mutual approved for use in Class I, Division I, Groups B, C and D; Class II, Groups E, F and G; and Class III hazardous environments. It also has a marine rating and is approved for NEMA-4X applications. MPS Pull Stations are NEMA-3R listed when mounted to the MPS-WP weatherproof back box. All models are painted red with raised white lettering and a locking mechanism to prevent unauthorized reset.
       
     
     
     

    Enter your email for a chance to WIN $100 Amex Gift Card.

    Please Enter Your Email Address

    *One entry per household please