|
|
|
|
|
|
|
|
|
Bosch / Detection Systems HACIPCCC - IP CAMERA COOLING CASE
▶ Increases the ambient temperature range of housed Dinion IP cameras
▶ Works inside Bosch outdoor housings
▶ 6.5 °C (12 °F) increase in the camera’s operating temperature range (with optional blower installed)
▶ Easy installation
▶ Black lightweight aluminum
Installing this unit allows a Dinion IP camera to work at a higher ambient temperature, when installed inside a Bosch outdoor housing unit with the optional blower also installed.
System Overview This unit can only be used in combination with an HSG housing unit that has the optional blower installed.
Functions The HAC-IPCCC mounts easily on top of a Dinon IP camera, and reduces the operating temperature of the camera (in combination with a Bosch outdoor housing unit with optional blower installed) up to 6.5 °C (12 °F). With an HAC‑IPCCC installed, the temperature inside the housing can rise to a maximum of +46.5 °C (+115.7 °F). The maximum temperature inside the housing without an HAC‑IPCCC is +40 °C (+104 °F).
HAC-IPCCC Camera Cooling Case For use with Dinion IP cameras in combination with LTC 9X83 and UHO Series housings equipped with bower option
|
ProBridge for PTZ over Ethernet
The ProBridge 2 line provides an interface between GE Security's DVMRe family of digital video multiplexer/recorders and selected pan/tilt/zoom domes and receiver/drivers, including GE Security's CyberDomes.
Standard Features:
* Connect GE Security DVMRe units and PTZ receiver/drivers and dome cameras without using a local keypad for control * Converts RS-485 protocol into output readable by * CyberDome cameras * Units work with domes and receiver/drivers from other manufacturers
|
|
|
|
|
|
|
|
|
|
|
|
|
The On-Q/Legrand Home Systems line of Category 5e keystone style jacks provide optimum performance for all voice/data applications. The jacks accept either RJ-45 or RJ-11 plugs for voice applications. For data applications the jacks can support standard 100 Mbps Ethernet or Gigabit Ethernet (Gigabit network hardware required). The jacks are available in Ivory, Light Almond, White, Blue, or Grey. This variety of colors allows you to uniquely identify jacks based on application. Features Universal design supports either T568A or T568B termination standard 180o punchdown for easy termination Easy to read color coded wiring label Rear mount, snap-in keystone design Removes easily for quick re-termination Perfectly color matched with On-Q/Legrand wall plates Available colors: Ivory, Light Almond, White, Blue, and Grey
Specifications
Dimensions: 0.64” (H) 0.63” (W) X 1.29” (D) 16.27mm (H) X 16.20mm (W) X 32.70mm (D) Housing: High-impact, Flame-retardant plactic, UL 94V-0 Wire contacts: High quality phosphor bronze, plated with 50 micro-inches of 24K gold over 100 micro-inches of nickel IDC: 110 style solder-plated phosphor bronze, accepts 22 - 26 wire gauge Mechanical properties: 30 lbs retention force between jack and plug - minimum life of 750 insertion/extraction cycles
|
1-Gang, blank plate (Formerly Greyfox)
|
|
|
|
|
|
|
|
|
|
|
|
|
1-Gang blank plate (Formerly Greyfox)
|
1-Gang blank plate (Formerly Greyfox)
|
|
|
|
|
|
|
|
|
|
|
|
Features:
• Supports standard decorator devices or a combination of standard duplex and decorator devices
• 1, 2, or 3-gang configuration
• Oversized to cover-up drywall errors
• Available in white, ivory, or light almond; color matched to Pass & Seymour/ Legrand devices
• Individually packaged with color-matching screws
•Resistant to discoloration, greases, oils, solvents & moisture
•Excellent flexibility
Technical Specifications:
• Material is V-2 rated, fire resistant - Allied Signal Capron 8202CA
• Conforms to NEMA and ANSI standards
• UL 514C listed
|
Features:
• Supports standard decorator devices or a combination of standard duplex and decorator devices
• 1, 2, or 3-gang configuration
• Oversized to cover-up drywall errors
• Available in white, ivory, or light almond; color matched to Pass & Seymour/ Legrand devices
• Individually packaged with color-matching screws
•Resistant to discoloration, greases, oils, solvents & moisture
•Excellent flexibility
Technical Specifications:
• Material is V-2 rated, fire resistant - Allied Signal Capron 8202CA
• Conforms to NEMA and ANSI standards
• UL 514C listed
|
|
|
|
|
|
|
|
|
|
|
|
Features:
• Supports standard decorator devices or a combination of standard duplex and decorator devices
• 1, 2, or 3-gang configuration
• Oversized to cover-up drywall errors
• Available in white, ivory, or light almond; color matched to Pass & Seymour/ Legrand devices
• Individually packaged with color-matching screws
•Resistant to discoloration, greases, oils, solvents & moisture
•Excellent flexibility
Technical Specifications:
• Material is V-2 rated, fire resistant - Allied Signal Capron 8202CA
• Conforms to NEMA and ANSI standards
• UL 514C listed
|
Features:
• Supports standard decorator devices or a combination of standard duplex and decorator devices
• 1, 2, or 3-gang configuration
• Oversized to cover-up drywall errors
• Available in white, ivory, or light almond; color matched to Pass & Seymour/ Legrand devices
• Individually packaged with color-matching screws
•Resistant to discoloration, greases, oils, solvents & moisture
•Excellent flexibility
Technical Specifications:
• Material is V-2 rated, fire resistant - Allied Signal Capron 8202CA
• Conforms to NEMA and ANSI standards
• UL 514C listed
|
|
|
|
|
|
|
|
|
|
|
|
Features:
• Supports standard decorator devices or a combination of standard duplex and decorator devices
• 1, 2, or 3-gang configuration
• Oversized to cover-up drywall errors
• Available in white, ivory, or light almond; color matched to Pass & Seymour/ Legrand devices
• Individually packaged with color-matching screws
•Resistant to discoloration, greases, oils, solvents & moisture
•Excellent flexibility
Technical Specifications:
• Material is V-2 rated, fire resistant - Allied Signal Capron 8202CA
• Conforms to NEMA and ANSI standards
• UL 514C listed
|
Features:
• Supports standard decorator devices or a combination of standard duplex and decorator devices
• 1, 2, or 3-gang configuration
• Oversized to cover-up drywall errors
• Available in white, ivory, or light almond; color matched to Pass & Seymour/ Legrand devices
• Individually packaged with color-matching screws
•Resistant to discoloration, greases, oils, solvents & moisture
•Excellent flexibility
Technical Specifications:
• Material is V-2 rated, fire resistant - Allied Signal Capron 8202CA
• Conforms to NEMA and ANSI standards
• UL 514C listed
|
|
|
