You are here: Home > Shop Brands > Apex > Transmitters
We found 63 results matching your criteria.
Sort By:
Page of 6
Apex DES6100AN 80 Zone With Paging Destiny Control Apex DES6100WT Replacement Control Panel WESTEC, 5800
80 ZONE W/PAGING DESTINY CNTRL Apex DES6100WT Replacement Control Panel WESTEC, 5800
Apex WRLSHKT Wireless Kit With WL500-H GE 60719 Toolbox Modem Kit (Recommended Modem for Remote Programmer, Includes Instructions)
Apex WRLSHKT Wireless Kit With WL500-H GE 60719 Toolbox Modem Kit (Recommended Modem for Remote Programmer, Includes Instructions)
Safety Technology Inc. 7510AHTR Heated Polycarbonate Enclosure Safety Technology Inc. 7551AC Polycarbonate Protective Cabinet with Air Conditioner
This enclosure is designed to maintain a temperature above freezing which allows a wide range of devices, components and sensitive units to be installed outdoors, in freezers, unheated warehouses or storage units.

The radiant heat plate will prevent LCD displays from becoming sluggish or freezing. Designed to operate on 12, 16.5 or 24 volts and has three thermostats; a control thermostat, over temperature safety thermostat and a low temperature warning which can connect to a supervisory panel.

The enclosure comes with an exterior key lock and an enclosed deep backbox. The cover is backed by a lifetime guarantee against breakage in normal use (one year on electronics). Mounting hardware and gaskets are included.

FEATURES

  • For use in areas where temperature or environmental conditions exceed the operating range of important devices.
  • Heater has three thermostats; a control thermostat, over temperature safety thermostat and a low temperature warning which can connect to a supervisory panel.
  • LED indicators for "POWER" to unit and heat cycle "ON".
  • Includes 16.5VAC, 40VA Class 2 auto resetting transformer.
  • Multi-voltage heater.
  • Includes exterior key lock and an enclosed deep backbox.
  • Mounting hardware and gaskets are included.
  • Each protected unit can be clearly seen and quickly identified.
  • Cover is UV-stabilized against sun deterioration.
  • Lifetime guarantee against breakage in normal use (one year on electronics).
  • 94V-2 flammability rating.
  • This air conditioned unit allows fire alarm control panels to be protected from extreme temperatures or other areas requiring NEMA 4X protection. The extra large, super tough, see-through polycarbonate enclosure offers protection against vandalism, either accidental or intentional, as well as dirt, dust and grime.

    To help maintain the correct range of operating temperatures, the air conditioning unit cycles as required and a fan runs continuously to sustain a uniform temperature inside the enclosure. The stainless steel air conditioner contains an integral power supply and built-in condensate removal system.

    FEATURES

  • Clear polycarbonate cover with air conditioner.
  • Contains an integral power supply and built-in condensate removal system.
  • Cost effective, low maintenance, compact and lightweight design.
  • Does not require a compressor, fluorocarbons or filters.
  • Air conditioner unit is externally mounted to minimize space intrusion.
  • Design allows visibility from almost every angle.
  • Includes thumb lock.
  • Allows fire alarm control panels to be protected from extreme temperatures.
  • Air conditioning unit cycles as required and a fan runs continuously to sustain a uniform temperature inside the enclosure.
  • Cover is UV-stabilized against sun deterioration.
  • Lifetime guarantee against breakage of polycarbonate in normal use (one year on electronics).
  • Safety Technology Inc. 7560AC  STI Metal Protective Cabinet with Air Conditioner Safety Technology Inc. STI-6550 Widebody Keypad Protector without Lock - Clear
    This air conditioned enclosure allows alarm control panels to be protected from extreme temperatures or other areas requiring NEMA 4 protection. The extra large, super tough, heavy-duty metal enclosure offers protection against vandalism, either accidental or intentional, as well as dirt, dust and grime. Unlike competitor models, this NEMA 4 Certified enclosure has a clear window allowing the unit within to be quickly identified and includes two key locks for added security.

    To help maintain the correct range of operating temperatures, the air conditioning unit cycles as required and a fan runs continuously to sustain a uniform temperature inside the enclosure. The steel (with baked enamel finish) air conditioner is cost effective, low maintenance, compact and is externally mounted to minimize space intrusion.

    FEATURES

  • Protects fire alarm control panels and large electronic devices from extreme temperatures.
  • A/C unit is externally mounted to minimize space intrusion.
  • A/C unit cycles and a fan runs continuously to sustain a uniform temperature inside the enclosure.
  • Cost effective, low maintenance and compact design. Heavy-duty metal enclosure with air conditioner.
  • Clear window allows the unit within to be seen and quickly identified.
  • One year warranty on electronics.
  • This versatile protective cover helps prevent theft and vandalism to larger keypads, access controls and similar devices. Cover increases the life and reliability of units by protecting them from accidental or intentional damage. Optional gaskets to help keep out water in wet locations and wash down areas. Polycarbonate cover and frame is clear with no lock. See STI-6560 model for lock and STI-6550S model for smoke color. 

    Cover is backed by a lifetime guarantee against breakage and damage in normal use. It is molded of thick super tough polycarbonate material.

    Features:

    • Protects against vandalism and accidental damage.
    • Fast and easy installation. 
    • Cover is molded from thick polycarbonate material.
    • STI-6550 is for flush mount units.
    • With gasket, ideal for using in areas that require frequent hosing down or have a wet environment. 
    • UL Listed to U.S. and Canadian safety standards. 
    • Polycarbonate rated -40F to 120F (-40C to 49C). 
    • Lifetime guarantee against breakage in normal use. 
    • Fits virtually all manual pull stations (see Technical Data Sheet for dimensions)
    Safety Technology Inc. STI-6550S Widebody Keypad Protector without Lock - Smoke Color Safety Technology Inc. STI-6560 Widebody Keypad Protector with Key Lock - Clear

    This versatile protective cover helps prevent theft and vandalism to larger keypads, access controls and similar devices. Cover increases the life and reliability of units by protecting them from accidental or intentional damage. Optional gaskets to help keep out water in wet locations and wash down areas. Polycarbonate cover and frame is clear with no lock. See STI-6560 model for lock and STI-6550S model for smoke color. 

    Cover is backed by a lifetime guarantee against breakage and damage in normal use. It is molded of thick super tough polycarbonate material.

    Features:

    • Protects against vandalism and accidental damage.
    • Fast and easy installation. 
    • Cover is molded from thick polycarbonate material.
    • STI-6550 is for flush mount units.
    • With gasket, ideal for using in areas that require frequent hosing down or have a wet environment. 
    • UL Listed to U.S. and Canadian safety standards. 
    • Polycarbonate rated -40F to 120F (-40C to 49C). 
    • Lifetime guarantee against breakage in normal use. 
    • Fits virtually all manual pull stations (see Technical Data Sheet for dimensions)

    This versatile protective cover helps prevent theft and vandalism to larger keypads, access controls and similar devices. Cover increases the life and reliability of units by protecting them from accidental or intentional damage, as well as severe environments and dirt, dust and grime. With optional gasket, it also helps keep out water in wet locations and wash down areas. Polycarbonate cover and frame is clear with lock. See STI 6550 model for no lock and STI 6560S model for smoke color. 

    Cover is backed by a lifetime guarantee against breakage and damage in normal use. It is molded of thick super tough polycarbonate material. Locking units are not permitted on actuation stations used for fire or emergency life functions.

    Features:

    • Protects against vandalism and accidental damage.
    • Fast and easy installation. 
    • Molded from thick polycarbonate material.
    • STI-6560 is for flush mount units.
    • Complete with lock and tamper key.
    • With gasket, ideal for using in areas that require frequent hosing down or have a wet environment. 
    • UL Listed U.S. and Canadian safety standards. 
    • Polycarbonate rated -40F to 120F (-40C to 49C). 
    • Lifetime guarantee against breakage in normal use. 
    • Fits virtually all manual pull stations (see Technical Data Sheet for dimensions)

    Safety Technology Inc. STI-6560S Widebody Keypad Protector with Key Lock - Smoke Color Safety Technology Inc. STI-6561 Widebody Keypad Protector with Key Lock with Thumb Lock

    This versatile protective cover helps prevent theft and vandalism to larger keypads, access controls and similar devices. Cover increases the life and reliability of units by protecting them from accidental or intentional damage, as well as severe environments and dirt, dust and grime. With optional gasket, it also helps keep out water in wet locations and wash down areas. Polycarbonate cover and frame is clear with lock. See STI 6550 model for no lock and STI 6560S model for smoke color. 

    Cover is backed by a lifetime guarantee against breakage and damage in normal use. It is molded of thick super tough polycarbonate material. Locking units are not permitted on actuation stations used for fire or emergency life functions.

    Features:

    • Protects against vandalism and accidental damage.
    • Fast and easy installation. 
    • Molded from thick polycarbonate material.
    • STI-6560 is for flush mount units.
    • Complete with lock and tamper key.
    • With gasket, ideal for using in areas that require frequent hosing down or have a wet environment. 
    • UL Listed U.S. and Canadian safety standards. 
    • Polycarbonate rated -40F to 120F (-40C to 49C). 
    • Lifetime guarantee against breakage in normal use. 
    • Fits virtually all manual pull stations (see Technical Data Sheet for dimensions)

    This versatile protective cover helps prevent theft and vandalism to larger keypads, access controls and similar devices. Cover increases the life and reliability of units by protecting them from accidental or intentional damage, as well as severe environments and dirt, dust and grime. With optional gasket, it also helps keep out water in wet locations and wash down areas. Polycarbonate cover and frame is clear with lock. See STI 6550S model for no lock and STI 6560 model for clear color. 

    Cover is backed by a lifetime guarantee against breakage and damage in normal use. It is molded of thick super tough polycarbonate material. Locking units are not permitted on actuation stations used for fire or emergency life functions.

    Features:

    • Protects against vandalism and accidental damage.
    • Fast and easy installation. 
    • Molded from thick polycarbonate material.
    • STI-6560S is for flush mount units.
    • Complete with lock and tamper key.
    • With gasket, ideal for using in areas that require frequent hosing down or have a wet environment. 
    • UL Listed to U.S. and Canadian safety standards. 
    • Polycarbonate rated -40F to 120F (-40C to 49C). 
    • Lifetime guarantee against breakage in normal use. 
    • Fits virtually all manual pull stations (see Technical Data Sheet for dimensions)
       
     
     
     

    Enter your email for a chance to WIN $100 Amex Gift Card.

    Please Enter Your Email Address

    *One entry per household please