Black And White Video Processors
Sophisticated Performance at Low Cost
The new Fire-Lite MS-5UD-3, five zone, and MS-10UD-7, ten zone, conventional fire control panels have features normally found in more expensive addressable systems.
Key features include:
FL-MS10UD7 / MS-10UD-7: Ten-zone, 24-volt Fire Alarm Control Panel (includes backbox, FLPS-7 power supply, technical manual, and a frame & post operating instruction sheet).
The Fire-Lite MS-2 and MS-2E Fire Alarm Control Panels bring the latest in microprocessor technology to conventional fire controls. The MS-2 is compatible with the new i³ smoke detectors from System Sensor, and provides such advanced features as drift compensation, maintenance alert, and freeze warning. Automatic synchronization of audio/visual devices is provided, using three selections for manufacturer protocol. The NAC protocol includes the ability to silence audible devices while strobes continue to flash, using only a single pair of wires. The MS-2 also is compatible with conventional input devices such as two- and four-wire smoke detectors, pull stations, waterflow devices, tamper switches and other normally- open contact devices. For 240 VAC operation, order MS-2E. See the Fire•Lite Device Compatibility Document 15384 for a complete list of compatible devices. NOTE: Unless indicated otherwise, the term “MS-2” refers to both MS-2 and MS-2E models.
FEATURES • Two Style B (Class B) IDCs (Initiating Device Circuits). • One Style Y (Class B) NAC (Notification Appliance Circuit). • 24 VDC. • i³ Technology features: — Drift compensation automatically adjusts detector sensitivity and increases resistance to false alarms caused by dust accumulation. — Maintenance Alert LEDs (per zone) warn of excessive dirt accumulation, preventing false alarms (meets NFPA 72 requirements). — Detector sensitivity is automatically measured by the detector, which automatically adjusts its sensitivity back to the factory settings when it becomes more sensitive due to contaminants settling in the chamber. — Wireless handheld sensitivity meter eliminates the need for voltmeters, magnets and a physical connection to the detector. The reader displays sensitivity in terms of percent per foot obscuration and provides text status indication. — Supervisory LED (per zone) provides warning if a detector senses temperature approaching freezing. — Special test protocol and LED indication allows quick test of all detectors without need for a ladder. • NAC synchronization features: — Provides synchronization of standard ANSI audible signals as required by NFPA 72. — Provides synchronization of ADA compliant strobes per NFPA 72. — Selectable for System Sensor, Wheelock and Gentex protocols. — Selective Silence feature allows manual silence of horns while strobes continue to flash on the same NAC. • Silent or Audible Walk Test operation mode commanded from the front keypad, with automatic return to normal after one hour of inactivity. • Alarm verification selectable per zone. • Each zone may be programmed for supervisory or fire, with separate red and yellow LEDs. • Disable switches provided per zone. • NACs programmable for: — Silence Inhibit — Auto Silence — Strobe Synchronization — Selective Silence (horn-strobe mute) — Temporal or Steady signal — Silenceable or Nonsilenceable • Form-C Alarm and Trouble relays. • 3.0 amps total usable current. • Optional dress panel (P/N DP-MS2/4).
REPLACES FL-MS4424
GENThe Fire•Lite MS-4 and MS-4E Fire Alarm Control Panels bring the latest in microprocessor technology to conventional fire controls. The MS-4 is compatible with the i³™ smoke detectors from System Sensor, and provide such advanced features as drift compensation, maintenance alert, and freeze warning. Automatic synchronization of audio/visual devices is provided, using three selections for manufacturer protocol. The NAC protocol includes the ability to silence audible devices while strobes continue to flash, using only a single pair of wires.
The MS-4 also is compatible with conventional input devices such as two- and four-wire smoke detectors, pull stations, waterflow devices, tamper switches and other normally-open contact devices. For 240 VAC operation, order MS-4E. See the Fire•Lite Device Compatibility Document 15384 for a complete list of compatible devices. NOTE: Unless indicated otherwise, the term “MS-4” refers to both MS-4 and MS-4E models.
FEATURES • Four Style B (Class B) IDCs (Initiating Device Circuits). • Two Style Y (Class B) NACs (Notification Appliance Circuits). • Optional module that converts all four IDCs and two NACs to Class A. • 24 VDC. • i³™ Technology features: — Drift compensation automatically adjusts detector sensitivity and increases resistance to false alarms caused by dust accumulation. — Maintenance Alert LEDs (per zone) warn of excessive dirt accumulation, preventing false alarms (meets NFPA 72 requirements). — Detector sensitivity is automatically measured by the detector, which automatically adjusts its sensitivity back to the factory settings when it becomes more sensitive due to contaminants settling in the chamber. — Wireless hand-held sensitivity meter eliminates the need for voltmeters, magnets and a physical connection to the detector. The reader displays sensitivity in terms of percent per foot obscuration and provides text status indication. — Supervisory LED (per zone) provides warning if a detector senses temperature approaching freezing. — Special test protocol and LED indication allows quick test of all detectors without need for a ladder. • NAC synchronization features: — Provides synchronization of standard ANSI audible signals as required by NFPA 72. — Provides synchronization of ADA compliant strobes per NFPA 72. — Selectable for System Sensor, Wheelock and Gentex protocols. — Selective Silence feature allows manual silence of horns while strobes continue to flash on the same NAC. • Silent or Audible Walk Test operation mode commanded from the front keypad, with automatic return to normal after one hour of inactivity. • Programmable for combination tamper supervisory monitor and waterflow alarm on one zone. • Alarm verification selectable per zone. • Each zone may be programmed for supervisory or fire, with separate red and yellow LEDs. • Disable switches provided per zone. • NACs programmable for: — Silence Inhibit — Auto Silence — Strobe Synchronization — Selective Silence (horn-strobe mute) — Temporal or Steady signal — Silenceable or Nonsilenceable • Form-C Alarm, Trouble and Supervisory relays. • 3.0 A total usable current. • 6.0 A total usable current available with optional second transformer. • Optional dress panel (P/N DP-MS2/4).
REPLACES FL-MS4424 FL-MS4424B
FL-MS5UD3 / MS-5UD-3: Five-zone, 24-volt Fire Alarm Control Panel (includes backbox, FLPS-3 power supply, technical manual, and a frame & post operating instruction sheet).
Sophisticated Performance at the Cost of a Conventional System. The MS-9050UD Fire Alarm Control Panel offers state-of-the-art technology with easy installation, operation, and maintenance. Suited for stand-alone applications, the MS-9050UD is ideal for smaller facilities such as apartment complexes, banks, cinemas, child care and elementary schools, department stores, food stores, places of worship, restaurants, small retail outlet stores, and other facilities requiring performance-based, sophisticated technology at reasonable cost.
With capabilities such as remote upload/download programming and diagnostics, addressable point identification, drift compensation, built-in digital communication, and NAC synchronization, the MS-9050UD delivers features typically found only in more expensive, larger systems.
High Performance with Remarkable Flexibility. The panel supports a wide range of addressable sensors, control outputs, and notification devices capable of meeting the most challenging design specifications. With support for up to 50 addressable points of any type on a single SLC loop, the MS-9050UD provides advanced addressable features at a price that competes with conventional systems.
With an integrated Digital Alarm Communicator Transmitter (DACT) for off-premises monitoring and remote Upload/Download programming support, the MS-9050UD is a compact Fire Alarm Control Panel that provides large system technology with remarkable flexibility.
The ultra compact and weatherproof Ball Camera features a gray or black Lexan® housing that can be rotated 350° and tilted 90° during installation. It can be mounted to a ceiling, wall, or over a single gang box. It will withstand temperatures ranging from 14 to 122 °F (-10 to 50 °C).
The Ball Camera can be ordered with a black-and-white camera that delivers 580 TV lines of resolution and is sensitive to 0.1 lux, a color camera that delivers 480 TV lines of resolution and is sensitive to 1.0 lux, or a color/monochrome camera that delivers 480 TV lines of resolution.
During the day, the color/monochrome camera provides a high-resolution, color image that is sensitive to 1.0 lux. During low-light conditions, the camera will respond to IR illumination from an IR source (such as an IR lamp or LEDs), providing a clear, high-quality image under 0-lux visible light. The Ball Camera is available with a 2.5-, 4-, 6-, 8-, or 12-mm lens. It accepts a 10 to 40 VDC / 18 to 30 VAC input voltage.
Ball Camera Standard Features
The compact, weatherproof Rugged Ceiling/Wall Camera can be wall, ceiling or corner mounted for discreet surveillance in both indoor and outdoor applications. Choose from three fixed lenses, two varifocal lenses or a lens pack that allows you to manually adjust the magnification and field of view. Ceiling mount brackets fit your specific application.
CR1500 Series Standard Features
GE-CR-1500-4-CW
The ultra compact Ceiling/Wedge Camera can be discreetly mounted indoors or outdoors to a wall or ceiling. It also features an easy-to-position camera that can be adjusted vertically and horizontally and rotated 90 °F for easy wall mounting.
The Ceiling/Wedge Camera accepts a 10 to 40 VDC/ 18 to 30 VAC input voltage. It will withstand temperatures ranging from 14 to 122 °F. (-10 to 50 °C).
CW Series Standard Features
GE-CW-1500-12
This North American style, ADA compliant, multipurpose push button switch covers a wide range of applications. It incorporates a unique, patented design that helps dramatically to stop accidental activation. You have the choice of symbol, wording and language.
Because of the superior, patented design combined with quality construction, you can expect outstanding performance for years to come. Customers are surprised to find all this quality is available at no increase in price.
SS-2100X FEATURES
Universal Button offers an astounding 240 different combinations for the price of a standard one configuration button. The faceplate is constructed of cast aluminum, allowing it to take tough knocks in stride, and is slightly oversized to cover old plate installation marks. Button package includes: faceplate, three illuminated push buttons, four interchangeable button messages and ten interchangeable activation messages.
The UB-1 in use: Changing Options on the UB-1:
