|
|
|
|
|
|
|
|
|
|
The HPS3PM power supply/battery charger converts a low voltage AC input into an output of 12 VDC or 24 VDC @ 3.5 amps of continuous supply current (refer to specifications sheet). This access control power supply is power monitored with AC fail and low battery supervision (Form “C” contact relays). Specifications Dip switch selectable for 12 VDC or 24 VDC output. Provides up to 3.5 amps of continuous supply current when using appropriate transformer and ventilated enclosure. Output is filtered and electronically regulated. Built-in charger for sealed lead acid or gel type batteries. Maximum charge current of 400 mA. If battery charger is used, subtract 400 mA from total output to determine allowable load. Automatic brown-out protection. Instantaneously switches to stand-by battery upon AC fail. Battery protected from short circuits. Thermal and overload protection with auto reset. LED indicators for AC input and DC output. Compact design (board dimensions: 7”L x 4”W x 1.75”H) Battery leads and foam mounting tape included. AC fail and low battery supervision (Form “C” relay contacts rated @ 5 amps, 30 VDC/120 VAC). Temperature Range: 32°F to 120°F (0°C to 49°C)
|
These switching power supplies/distribution units convert 115 VAC input into 12 VDC or 24 VDC @ 3 A of supply current and distribute it using either individually fused outputs or PTCs. These general purpose power supplies have a wide range of applications for access control, security, and video systems that require additional power. For convenient installation, they come completely assembled with a steel enclosure, transformer and connecting hardware. Specifications
• Switch selectable for 12 VDC or 24 VDC @ 3 A.
• Input 1.0 A @ 115 VAC, 60 Hz max.
• AC fail and low battery supervision (form “C” relay contacts rated @ 5 A, 30 VDC/120 VAC).
• Output is filtered and electronically regulated.
• Thermally protected design.
• LED diagnostic indicators for AC input (green), main DC output (red), and individual DC outputs (green).
• Distribution boards include standard automotive fuses or PTCs along with a power disconnect switch per each distribution board (not included on HPS3PMTX).
• Hinged cover and vented enclosure with nine convenient knockouts.
• Temperature Range: 32°F to 120°F (0°C to 49°C); for indoor use only.
• Enclosure Dimensions: 15”H x 14.5”W x 3.1”D
|
|
|
|
|
|
|
|
|
|
|
|
|
|
These switching power supplies/distribution units convert 115 VAC input into 12 VDC or 24 VDC @ 3 A of supply current and distribute it using either individually fused outputs or PTCs. These general purpose power supplies have a wide range of applications for access control, security, and video systems that require additional power. For convenient installation, they come completely assembled with a steel enclosure, transformer and connecting hardware. Specifications
• Switch selectable for 12 VDC or 24 VDC @ 3 A.
• Input 1.0 A @ 115 VAC, 60 Hz max.
• AC fail and low battery supervision (form “C” relay contacts rated @ 5 A, 30 VDC/120 VAC).
• Output is filtered and electronically regulated.
• Thermally protected design.
• LED diagnostic indicators for AC input (green), main DC output (red), and individual DC outputs (green).
• Distribution boards include standard automotive fuses or PTCs along with a power disconnect switch per each distribution board (not included on HPS3PMTX).
• Hinged cover and vented enclosure with nine convenient knockouts.
• Temperature Range: 32°F to 120°F (0°C to 49°C); for indoor use only.
• Enclosure Dimensions: 15”H x 14.5”W x 3.1”D
|
These switching power supplies/distribution units convert 115 VAC input into 12 VDC or 24 VDC @ 3 A of supply current and distribute it using either individually fused outputs or PTCs. These general purpose power supplies have a wide range of applications for access control, security, and video systems that require additional power. For convenient installation, they come completely assembled with a steel enclosure, transformer and connecting hardware. Specifications
• Switch selectable for 12 VDC or 24 VDC @ 3 A.
• Input 1.0 A @ 115 VAC, 60 Hz max.
• AC fail and low battery supervision (form “C” relay contacts rated @ 5 A, 30 VDC/120 VAC).
• Output is filtered and electronically regulated.
• Thermally protected design.
• LED diagnostic indicators for AC input (green), main DC output (red), and individual DC outputs (green).
• Distribution boards include standard automotive fuses or PTCs along with a power disconnect switch per each distribution board (not included on HPS3PMTX).
• Hinged cover and vented enclosure with nine convenient knockouts.
• Temperature Range: 32°F to 120°F (0°C to 49°C); for indoor use only.
• Enclosure Dimensions: 15”H x 14.5”W x 3.1”D
|
|
|
|
|
|
|
|
|
|
|
|
|
|
These switching power supplies/distribution units convert 115 VAC input into 12 VDC or 24 VDC @ 3 A of supply current and distribute it using either individually fused outputs or PTCs. These general purpose power supplies have a wide range of applications for access control, security, and video systems that require additional power. For convenient installation, they come completely assembled with a steel enclosure, transformer and connecting hardware. Specifications
• Switch selectable for 12 VDC or 24 VDC @ 3 A.
• Input 1.0 A @ 115 VAC, 60 Hz max.
• AC fail and low battery supervision (form “C” relay contacts rated @ 5 A, 30 VDC/120 VAC).
• Output is filtered and electronically regulated.
• Thermally protected design.
• LED diagnostic indicators for AC input (green), main DC output (red), and individual DC outputs (green).
• Distribution boards include standard automotive fuses or PTCs along with a power disconnect switch per each distribution board (not included on HPS3PMTX).
• Hinged cover and vented enclosure with nine convenient knockouts.
• Temperature Range: 32°F to 120°F (0°C to 49°C); for indoor use only.
• Enclosure Dimensions: 15”H x 14.5”W x 3.1”D
|
These switching power supplies/distribution units convert 115 VAC input into 12 VDC or 24 VDC @ 3 A of supply current and distribute it using either individually fused outputs or PTCs. These general purpose power supplies have a wide range of applications for access control, security, and video systems that require additional power. For convenient installation, they come completely assembled with a steel enclosure, transformer and connecting hardware. Specifications
• Switch selectable for 12 VDC or 24 VDC @ 3 A.
• Input 1.0 A @ 115 VAC, 60 Hz max.
• AC fail and low battery supervision (form “C” relay contacts rated @ 5 A, 30 VDC/120 VAC).
• Output is filtered and electronically regulated.
• Thermally protected design.
• LED diagnostic indicators for AC input (green), main DC output (red), and individual DC outputs (green).
• Distribution boards include standard automotive fuses or PTCs along with a power disconnect switch per each distribution board (not included on HPS3PMTX).
• Hinged cover and vented enclosure with nine convenient knockouts.
• Temperature Range: 32°F to 120°F (0°C to 49°C); for indoor use only.
• Enclosure Dimensions: 15”H x 14.5”W x 3.1”D
|
|
|
|
|
|
|
|
|
|
|
|
|
The HPS5PM power supply/battery charger converts a low voltage AC input into an output of 12 VDC or 24 VDC @ 4.0A of continuous cupply current (refer to Specifications sheet). This access control power supply is power monitored with AC fail and low battery supervision (Form “C” contact relays). Specifications Dip switch selectable for 12VDC or 24VDC output. Provides up to 4.0A of continuous supply current when using appropriate tranformer and ventilated enclosure. Output is filtered and electronically regulated. Built-in charger for sealed lead acid or gell cell type batteries. Maximum charge current of 1A. If a battery charger is used, subtract 1A from total output to determine allowable load. Automatic brown out protection. Instantaneously switches to stand-by battery upon AC fail. Battery protected from short circuits. Thermal and short circuit protection with auto reset. LED indicators for AC input and DC output. Compact design (board dimension: 7”L x 4”W x 2.5”H) Battery leads and foam mounting tape included. AC fail and low battery supervision (Form “C” relay contacts rated @ 5A, 30VDC/120VAC).
|
These switching power supplies/distribution units convert 115 VAC input into 12 VDC or 24 VDC @ 4 A of supply current and distribute it using either individually fused outputs or PTCs. These general purpose power supplies have have a wide range of applications for access control, security and video systems that require additional power. For convenient installation, they come completely assembled with a steel enclosure, transformer, and connecting hardware. Specifications
• Switch selectable 12/24VDC @ 4A.
• Input 1.0A @ 115VAC, 60Hz max.
• Filtered and electronically regulated output.
• Thermally protected design.
• Up to 1.0A of battery charging current.
• LED diagnostic indicators for AC input (green), main DC output (red), and individual DC outputs (green).
• Distribution boards include standard automotive fuses or PTCs along with a power disconnect switch per distribution board (not included on HPS5PMTX).
• Hinged cover and vented enclosure with nine convenient knockouts.
• Temperature range: 32°F to 120°F (0°C to 49°C); for indoor use only.
• Enclosure dimensions: 15”H x 14.5”W x 2.5”D.
• AC fail and low battery supervision (Form “C” relay contacts rated @ 5A, 30 VDC/120VAC).
|
|
|
|
|
|
|
|
|
|
|
|
|
These switching power supplies/distribution units convert 115 VAC input into 12 VDC or 24 VDC @ 4 A of supply current and distribute it using either individually fused outputs or PTCs. These general purpose power supplies have have a wide range of applications for access control, security and video systems that require additional power. For convenient installation, they come completely assembled with a steel enclosure, transformer, and connecting hardware. Specifications
• Switch selectable 12/24VDC @ 4A.
• Input 1.0A @ 115VAC, 60Hz max.
• Filtered and electronically regulated output..
• Thermally protected design.
• Up to 1.0A of battery charging current.
• LED diagnostic indicators for AC input (green), main DC output (red), and individual DC outputs (green).
• Distribution boards include standard automotive fuses or PTCs along with a power disconnect switch per distribution board (not included on HPS5PMTX).
• Hinged cover and vented enclosure with nine convenient knockouts.
• Temperature range: 32°F to 120°F (0°C to 49°C); for indoor use only.
• Enclosure dimensions: 15”H x 14.5”W x 2.5”D.
• AC fail and low battery supervision (Form “C” relay contacts rated @ 5A, 30 VDC/120VAC).
|
These switching power supplies/distribution units convert 115 VAC input into 12 VDC or 24 VDC @ 4 A of supply current and distribute it using either individually fused outputs or PTCs. These general purpose power supplies have have a wide range of applications for access control, security and video systems that require additional power. For convenient installation, they come completely assembled with a steel enclosure, transformer, and connecting hardware. Specifications
• Switch selectable 12/24VDC @ 4A.
• Input 1.0A @ 115VAC, 60Hz max.
• Filtered and electronically regulated output..
• Thermally protected design.
• Up to 1.0A of battery charging current.
• LED diagnostic indicators for AC input (green), main DC output (red), and individual DC outputs (green).
• Distribution boards include standard automotive fuses or PTCs along with a power disconnect switch per distribution board (not included on HPS5PMTX).
• Hinged cover and vented enclosure with nine convenient knockouts.
• Temperature range: 32°F to 120°F (0°C to 49°C); for indoor use only.
• Enclosure dimensions: 15”H x 14.5”W x 2.5”D.
• AC fail and low battery supervision (Form “C” relay contacts rated @ 5A, 30 VDC/120VAC).
|
|
|
|
|
|
|
|
|
|
|
|
|
These switching power supplies/distribution units convert 115 VAC input into 12 VDC or 24 VDC @ 4 A of supply current and distribute it using either individually fused outputs or PTCs. These general purpose power supplies have have a wide range of applications for access control, security and video systems that require additional power. For convenient installation, they come completely assembled with a steel enclosure, transformer, and connecting hardware. Specifications
• Switch selectable 12/24VDC @ 4A.
• Input 1.0A @ 115VAC, 60Hz max.
• Filtered and electronically regulated output..
• Thermally protected design.
• Up to 1.0A of battery charging current.
• LED diagnostic indicators for AC input (green), main DC output (red), and individual DC outputs (green).
• Distribution boards include standard automotive fuses or PTCs along with a power disconnect switch per distribution board (not included on HPS5PMTX).
• Hinged cover and vented enclosure with nine convenient knockouts.
• Temperature range: 32°F to 120°F (0°C to 49°C); for indoor use only.
• Enclosure dimensions: 15”H x 14.5”W x 2.5”D.
• AC fail and low battery supervision (Form “C” relay contacts rated @ 5A, 30 VDC/120VAC).
|
These switching power supplies/distribution units convert 115 VAC input into 12 VDC or 24 VDC @ 4 A of supply current and distribute it using either individually fused outputs or PTCs. These general purpose power supplies have have a wide range of applications for access control, security and video systems that require additional power. For convenient installation, they come completely assembled with a steel enclosure, transformer, and connecting hardware. Specifications
• Switch selectable 12/24VDC @ 4A.
• Input 1.0A @ 115VAC, 60Hz max.
• Filtered and electronically regulated output..
• Thermally protected design.
• Up to 1.0A of battery charging current.
• LED diagnostic indicators for AC input (green), main DC output (red), and individual DC outputs (green).
• Distribution boards include standard automotive fuses or PTCs along with a power disconnect switch per distribution board (not included on HPS5PMTX).
• Hinged cover and vented enclosure with nine convenient knockouts.
• Temperature range: 32°F to 120°F (0°C to 49°C); for indoor use only.
• Enclosure dimensions: 15”H x 14.5”W x 2.5”D.
• AC fail and low battery supervision (Form “C” relay contacts rated @ 5A, 30 VDC/120VAC).
|
|
|
