You are here: Home > Shop Brands > Honeywell Access Systems (formerly Northern Computers) > Integrated Systems
We found 9 results matching your criteria.

McAfee Secure sites help keep you safe from identity theft, credit card fraud, spyware, spam, viruses and online scams

Integrated Systems

  N-750 - Access Control / Burglar Panel
  PassPoint PLUS - Full-featured access control system
N-750 - Access Control / Burglar Panel
PassPoint PLUS - Full-featured access control system
Sort By:
Page of 1
Northern Computers PTPROX25  Prox. Cards (25) Pcs. 34-Bit NC-CBLN750PI N ZNE PI DRCT CNNCT,Cble Intrf - NC-CBLN750PI
PTPROX25 25 Prox Cards

Pack of 25 HID proximity cards (PassPoint 34-bit) with slot hole punch on the short side. Dimensions: 2.125" H x 3.375" W x .070" T (5.398cm H x 8.573cm W x .178cm T).

Must order a minimum of 100 cards for special programming!

NC-CBLN750PI N ZNE PI DRCT CNNCT,Cble Intrf - NC-CBLN750PI


The CBL-N-750-PI is used to interface the N-750-PI to a computer for direct connect using the Win750 software programs. 10' (3.05m) null cable with DB9 female to DB9 female connections

NC-N750APS Auxillary Power Supply F/N750 - NC-N750APS NC-N750CUST Nc-N750Custio Cust I/o 4/N750 Programming Charge - NC-N750CUST
NC-N750APS Auxillary Power Supply F/N750 - NC-N750APS


N-750-APS Auxiliary 12VDC Power Supply for the N-750 - The N-750-APS is a notification and auxiliary power expander that provides up to 2.5A of 12V power for powering notification appliances and auxiliary devices. The N-750-APS uses the N-750 snap track located in the N-750 cabinet or the N-750-ENC accessory enclosure

NC-N750CUST Nc-N750Custio Cust I/o 4/N750 Programming Charge - NC-N750CUST

NC-N750CUSTI N750Custio Custom I/O Programing Charge - NC-N750CUSTI NC-N750ENC Accessory Enclosure For N750 - NC-N750ENC
NC-N750CUSTI N750Custio Custom I/O Programing Charge - NC-N750CUSTI

NC-N750ENC Accessory Enclosure For N750 - NC-N750ENC


Standard N-750 size enclosure with two snap tracks. Snap tracks are used to mount accessories such as the N-750-APS and N-750-SSE. Each enclosure can hold four accessories and two BAT-N-750

NC-N750EOLULN750Eolul EOL UL Rstrs 4.7K - NC-N750EOLUL NC-N750RDRCN RDR Cnnctr F/N750 Pait - NC-N750RDRCN
NC-N750EOLULN750Eolul EOL UL Rstrs 4.7K - NC-N750EOLUL


End-of-line UL approved 4.7k resistor. The N-750-EOL-UL is used for all hardwire input zones on the N-750. (The N-750-EOL-UL is not used with the N-750-SS, use N-750-EOL-UL-SS)

NC-N750RDRCN RDR Cnnctr F/N750 Pait - NC-N750RDRCN


ive wire Wiegand connector that plugs into the N-750-PAIT. This allows a Wiegand format reader to be plugged directly into the N-750-PAIT. One unit comes standard with each N-750-PAIT

NC-N750SDB Status Display Module F/N-750 - NC-N750SDB
NC-N750SDB Status Display Module F/N-750 - NC-N750SDB


The N-750-SDB expandable relay board provides 16 low voltage outputs plus four Form C relay outputs. Up to three per N-750 system may be connected to provide up to 60 programmable outputs

   
 
 
 

Enter your email for a chance to WIN $100 Amex Gift Card.

Please Enter Your Email Address

*One entry per household please