You are here: Home > Shop Brands > Honeywell Access Systems (formerly Northern Computers) > Readers & Credentials > Wireless Readers
We found 46 results matching your criteria.
Sort By:
Page of 4
Northern Computers KG-ECK200 Wireless Solution For Elevators With Indoor Antenna Northern Computers KG-PIMTD2 2-Door Wireless Panel Interface Module
RSECK200 Wireless Solution for Elevators with Indoor Antenna PIM-TD2 Panel Interface Module Weigand (data1/data0) or magnetic stripe (clock & data) output; supports 2 doors includes weatherproof enclosure, internal antenna with ability to add remote antenna; requires 12 VDC power supply

The panel interface module is needed to enable all access control panels to interface with Schlage Wyreless Access solutions. The PIM seamlessly integrates with all Honeywell control panels via Wiegand Communications. The PIM operates in the 900MHz license free bands, which eliminates wiring from the panel to remote wireless solutions. Indoor range up to 200' in normal building construction on the same floor. Outdoor range up to 1,000' line of sight or 4,500' with optional gain antenna. Power requirements: 300mA @ 12VDC. Dimensions: 5.5" H x 8.25" W x 3.25" D (13.97cm H x 20.96cm W x 8.26cm D).

Northern Computers KG-PIMTD4 4-Door Wireless Panel Interface Module Northern Computers RSWRI-100-IND Indoor Wireless Reader Interface
PIM-TD4 Panel Interface Module Weigand (data1/data0) or magnetic stripe (clock & data) output; supports 4 doors includes weatherproof enclosure, internal antenna with ability to add up to two remote antenna; requires 12 VDC power supply

The panel interface module is needed to enable all access control panels to interface with Schlage Wyreless Access solutions. The PIM seamlessly integrates with all Honeywell control panels via Wiegand Communications. The PIM operates in the 900MHz license free bands, which eliminates wiring from the panel to remote wireless solutions. Indoor range up to 200' in normal building construction on the same floor. Outdoor range up to 1,000' line of sight or 4,500' with optional gain antenna. Power requirements: 300mA @ 12VDC. Dimensions: 5.5" H x 8.25" W x 3.25" D (13.97cm H x 20.96cm W x 8.26cm D).

RSWRI-100-IND Indoor Wireless Reader Interface
Northern Computers RSWRI-100-OTD Outdoor Wireless Reader Interface Wheelock E50-241575W-FR - SPEAKER STROBE 24 VOLT 15/75 CANDELLA RED
The RSWRI-100-OTD provides wireless communications between remote readers and a panel interface module. Enclosed in a weather tight enclosure, the RSWRI-100-OTD operates in the 900MHz license free bands, which eliminates wiring from the panel to remote wireless solutions. The RSWRI-100-OTD provides two reader inputs, two Form C relay outputs, door position, request-to-exit, request-to-enter and tamper inputs. Power requirements: 300mA @ 12VDC. Dimensions: 8.7" H x 6.94" W x 4.5" D (22cm H x 17.6cm W x 14cm D). Description
The Wheelock Series E50 Speakers and Speaker Strobes feature high efficiency sound output, with dual voltage (25/70 VRMS) capability and field selectable taps from 1/8 to 2 watts. They are designed to provide a sleek, aesthetic appearance for emergency voice/alarm communications systems. All Series E50 models mount to standard 4” x 2-1/8” electrical boxes (with no extension ring required) and incorporate a speaker mounting plate for faster installation. The grille cover snaps on so no mounting screws are visible. Attractive surface boxes are also available for surface installations.
The Series E50 Speaker Strobe models use Wheelock low current draw Series RSS strobes for wall mounted applications. Strobe options include patented MCW multi-candela strobes with field selectable candela settings of 15/30/75/110 cd or high intensity MCWH strobes with field selectable 135/185 candela. Models with 1575 candela (75 cd on axis) are also offered.
Series E50 Speakers and Speaker Strobes provide high audio output with clear audibility and are designed to meet the critical needs of the life safety industry for effective emergency voice communications, tone signaling and visible signaling to alert the hearing impaired.
The strobe portion of all Series E Speaker Strobes may be synchronized when used in conjunction with the Wheelock SM, DSM Sync Modules or the Wheelock’s PS-24-8MC Power Supply with Patented Sync Protocol. Wheelock synchronized strobes offer an easy way to comply with ADA and NFPA regulations concerning photosensitive epilepsy.
Series E50 Speaker Strobes are UL Listed for indoor use under Standard 1971 (Signaling Devices for the Hearing-Impaired) and Standard 1480 (Speaker Appliances). All inputs employ IN/OUT wiring terminals for fast installation using #12 to #18 AWG wiring and are compatible with FACP line supervision.
Color options for the Series E50 Speakers and Speaker Strobes are red or off-white.

Features
• Approvals include: UL Standard 1971, UL Standard 1480, New York City (MEA), California State Fire Marshal (CSFM), Factory Mutual (FM) and Chicago (BFP). See approvals by model in Specifications and Ordering Information
• ADA/NFPA/ANSI compliant
• Complies with OSHA 29 Part 1910.165
• Wall mount speaker strobe models with field selectable candela settings of 15/30/75/110cd or 135/185cd (Multi-Candela models), or 1575cd (Single Candela model)
• Field selectable taps for 25 or 70 VRMS operation from 1/8 watt up to 2 watts
• High efficiency design for maximum output at minimum wattage across a frequency range of 400 to 4000 HZ
• 24 VDC strobes produce 1 flash per second with wide UL “Regulated Voltage” of 16 to 33 volts using filtered DC or unfiltered VRMS input voltage
• Synchronize with Wheelock SM, DSM or Wheelock PS-12/24-8CP and PS-12/24-8MP Power Supply with built-in sync protocol
• Mount to 4” square x 2-1/8” deep backbox with no extension ring required
• Snap on grille cover with no visible mounting screws
• Fast installation with IN/OUT screw terminals using #12 to #18 AWG wires


Table 1: Average RMS Current

E50 Speaker Strobes

E50 Strobe Current - Wall Mount

241575W

24MCW

24MCWH

1575cd

15cd

30cd

75cd

110cd

135cd

185cd

24 vdc

0.06

0.041

0.063

0.109

0.14

0.195

0.27

UL max*

0.09

0.06

0.092

0.165

0.22

0.3

0.42

 

 

 

Table 2: E50 UL Reverberant dBA @ 10 Feet**

watts

1/8

1/4

1/2

1

2

E50 Speaker

77

79.5

82.5

85

88

E50 Speaker Strobe

77

79.5

82.5

85

88

 

**dBA ratings are based on UL testing under UL Standard 1480

 

Wheelock E50-241575W-FW - SPEAKER STROBE 24 VOLT 15/75 CANDELLA WHITE Wheelock E50-24MCW-FR - SPEAKER STROBE MULTI CANDELLA RED 24 VOLTS USE INSTEAD OF E2024MCWF
Description
The Wheelock Series E50 Speakers and Speaker Strobes feature high efficiency sound output, with dual voltage (25/70 VRMS) capability and field selectable taps from 1/8 to 2 watts. They are designed to provide a sleek, aesthetic appearance for emergency voice/alarm communications systems. All Series E50 models mount to standard 4” x 2-1/8” electrical boxes (with no extension ring required) and incorporate a speaker mounting plate for faster installation. The grille cover snaps on so no mounting screws are visible. Attractive surface boxes are also available for surface installations.
The Series E50 Speaker Strobe models use Wheelock low current draw Series RSS strobes for wall mounted applications. Strobe options include patented MCW multi-candela strobes with field selectable candela settings of 15/30/75/110 cd or high intensity MCWH strobes with field selectable 135/185 candela. Models with 1575 candela (75 cd on axis) are also offered.
Series E50 Speakers and Speaker Strobes provide high audio output with clear audibility and are designed to meet the critical needs of the life safety industry for effective emergency voice communications, tone signaling and visible signaling to alert the hearing impaired.
The strobe portion of all Series E Speaker Strobes may be synchronized when used in conjunction with the Wheelock SM, DSM Sync Modules or the Wheelock’s PS-24-8MC Power Supply with Patented Sync Protocol. Wheelock synchronized strobes offer an easy way to comply with ADA and NFPA regulations concerning photosensitive epilepsy.
Series E50 Speaker Strobes are UL Listed for indoor use under Standard 1971 (Signaling Devices for the Hearing-Impaired) and Standard 1480 (Speaker Appliances). All inputs employ IN/OUT wiring terminals for fast installation using #12 to #18 AWG wiring and are compatible with FACP line supervision.
Color options for the Series E50 Speakers and Speaker Strobes are red or off-white.

Features
• Approvals include: UL Standard 1971, UL Standard 1480, New York City (MEA), California State Fire Marshal (CSFM), Factory Mutual (FM) and Chicago (BFP). See approvals by model in Specifications and Ordering Information
• ADA/NFPA/ANSI compliant
• Complies with OSHA 29 Part 1910.165
• Wall mount speaker strobe models with field selectable candela settings of 15/30/75/110cd or 135/185cd (Multi-Candela models), or 1575cd (Single Candela model)
• Field selectable taps for 25 or 70 VRMS operation from 1/8 watt up to 2 watts
• High efficiency design for maximum output at minimum wattage across a frequency range of 400 to 4000 HZ
• 24 VDC strobes produce 1 flash per second with wide UL “Regulated Voltage” of 16 to 33 volts using filtered DC or unfiltered VRMS input voltage
• Synchronize with Wheelock SM, DSM or Wheelock PS-12/24-8CP and PS-12/24-8MP Power Supply with built-in sync protocol
• Mount to 4” square x 2-1/8” deep backbox with no extension ring required
• Snap on grille cover with no visible mounting screws
• Fast installation with IN/OUT screw terminals using #12 to #18 AWG wires


Table 1: Average RMS Current

E50 Speaker Strobes

E50 Strobe Current - Wall Mount

241575W

24MCW

24MCWH

1575cd

15cd

30cd

75cd

110cd

135cd

185cd

24 vdc

0.06

0.041

0.063

0.109

0.14

0.195

0.27

UL max*

0.09

0.06

0.092

0.165

0.22

0.3

0.42

 

 

 

Table 2: E50 UL Reverberant dBA @ 10 Feet**

watts

1/8

1/4

1/2

1

2

E50 Speaker

77

79.5

82.5

85

88

E50 Speaker Strobe

77

79.5

82.5

85

88

 

**dBA ratings are based on UL testing under UL Standard 1480

 

Description
The Wheelock Series E50 Speakers and Speaker Strobes feature high efficiency sound output, with dual voltage (25/70 VRMS) capability and field selectable taps from 1/8 to 2 watts. They are designed to provide a sleek, aesthetic appearance for emergency voice/alarm communications systems. All Series E50 models mount to standard 4” x 2-1/8” electrical boxes (with no extension ring required) and incorporate a speaker mounting plate for faster installation. The grille cover snaps on so no mounting screws are visible. Attractive surface boxes are also available for surface installations.
The Series E50 Speaker Strobe models use Wheelock low current draw Series RSS strobes for wall mounted applications. Strobe options include patented MCW multi-candela strobes with field selectable candela settings of 15/30/75/110 cd or high intensity MCWH strobes with field selectable 135/185 candela. Models with 1575 candela (75 cd on axis) are also offered.
Series E50 Speakers and Speaker Strobes provide high audio output with clear audibility and are designed to meet the critical needs of the life safety industry for effective emergency voice communications, tone signaling and visible signaling to alert the hearing impaired.
The strobe portion of all Series E Speaker Strobes may be synchronized when used in conjunction with the Wheelock SM, DSM Sync Modules or the Wheelock’s PS-24-8MC Power Supply with Patented Sync Protocol. Wheelock synchronized strobes offer an easy way to comply with ADA and NFPA regulations concerning photosensitive epilepsy.
Series E50 Speaker Strobes are UL Listed for indoor use under Standard 1971 (Signaling Devices for the Hearing-Impaired) and Standard 1480 (Speaker Appliances). All inputs employ IN/OUT wiring terminals for fast installation using #12 to #18 AWG wiring and are compatible with FACP line supervision.
Color options for the Series E50 Speakers and Speaker Strobes are red or off-white.

Features
• Approvals include: UL Standard 1971, UL Standard 1480, New York City (MEA), California State Fire Marshal (CSFM), Factory Mutual (FM) and Chicago (BFP). See approvals by model in Specifications and Ordering Information
• ADA/NFPA/ANSI compliant
• Complies with OSHA 29 Part 1910.165
• Wall mount speaker strobe models with field selectable candela settings of 15/30/75/110cd or 135/185cd (Multi-Candela models), or 1575cd (Single Candela model)
• Field selectable taps for 25 or 70 VRMS operation from 1/8 watt up to 2 watts
• High efficiency design for maximum output at minimum wattage across a frequency range of 400 to 4000 HZ
• 24 VDC strobes produce 1 flash per second with wide UL “Regulated Voltage” of 16 to 33 volts using filtered DC or unfiltered VRMS input voltage
• Synchronize with Wheelock SM, DSM or Wheelock PS-12/24-8CP and PS-12/24-8MP Power Supply with built-in sync protocol
• Mount to 4” square x 2-1/8” deep backbox with no extension ring required
• Snap on grille cover with no visible mounting screws
• Fast installation with IN/OUT screw terminals using #12 to #18 AWG wires


Table 1: Average RMS Current

E50 Speaker Strobes

E50 Strobe Current - Wall Mount

241575W

24MCW

24MCWH

1575cd

15cd

30cd

75cd

110cd

135cd

185cd

24 vdc

0.06

0.041

0.063

0.109

0.14

0.195

0.27

UL max*

0.09

0.06

0.092

0.165

0.22

0.3

0.42

Table 2: E50 UL Reverberant dBA @ 10 Feet**

watts

1/8

1/4

1/2

1

2

E50 Speaker

77

79.5

82.5

85

88

E50 Speaker Strobe

77

79.5

82.5

85

88

**dBA ratings are based on UL testing under UL Standard 1480

Wheelock E50-24MCW-FW - WHITE SPEAKER STROBE MULTI CANDELLA 24VDC WHITE Wheelock E50-24MCWH-FR - SPEAKER STROBE MULTI CANDELLA WALL RED 24 V
Description
The Wheelock Series E50 Speakers and Speaker Strobes feature high efficiency sound output, with dual voltage (25/70 VRMS) capability and field selectable taps from 1/8 to 2 watts. They are designed to provide a sleek, aesthetic appearance for emergency voice/alarm communications systems. All Series E50 models mount to standard 4” x 2-1/8” electrical boxes (with no extension ring required) and incorporate a speaker mounting plate for faster installation. The grille cover snaps on so no mounting screws are visible. Attractive surface boxes are also available for surface installations.
The Series E50 Speaker Strobe models use Wheelock low current draw Series RSS strobes for wall mounted applications. Strobe options include patented MCW multi-candela strobes with field selectable candela settings of 15/30/75/110 cd or high intensity MCWH strobes with field selectable 135/185 candela. Models with 1575 candela (75 cd on axis) are also offered.
Series E50 Speakers and Speaker Strobes provide high audio output with clear audibility and are designed to meet the critical needs of the life safety industry for effective emergency voice communications, tone signaling and visible signaling to alert the hearing impaired.
The strobe portion of all Series E Speaker Strobes may be synchronized when used in conjunction with the Wheelock SM, DSM Sync Modules or the Wheelock’s PS-24-8MC Power Supply with Patented Sync Protocol. Wheelock synchronized strobes offer an easy way to comply with ADA and NFPA regulations concerning photosensitive epilepsy.
Series E50 Speaker Strobes are UL Listed for indoor use under Standard 1971 (Signaling Devices for the Hearing-Impaired) and Standard 1480 (Speaker Appliances). All inputs employ IN/OUT wiring terminals for fast installation using #12 to #18 AWG wiring and are compatible with FACP line supervision.
Color options for the Series E50 Speakers and Speaker Strobes are red or off-white.

Features
• Approvals include: UL Standard 1971, UL Standard 1480, New York City (MEA), California State Fire Marshal (CSFM), Factory Mutual (FM) and Chicago (BFP). See approvals by model in Specifications and Ordering Information
• ADA/NFPA/ANSI compliant
• Complies with OSHA 29 Part 1910.165
• Wall mount speaker strobe models with field selectable candela settings of 15/30/75/110cd or 135/185cd (Multi-Candela models), or 1575cd (Single Candela model)
• Field selectable taps for 25 or 70 VRMS operation from 1/8 watt up to 2 watts
• High efficiency design for maximum output at minimum wattage across a frequency range of 400 to 4000 HZ
• 24 VDC strobes produce 1 flash per second with wide UL “Regulated Voltage” of 16 to 33 volts using filtered DC or unfiltered VRMS input voltage
• Synchronize with Wheelock SM, DSM or Wheelock PS-12/24-8CP and PS-12/24-8MP Power Supply with built-in sync protocol
• Mount to 4” square x 2-1/8” deep backbox with no extension ring required
• Snap on grille cover with no visible mounting screws
• Fast installation with IN/OUT screw terminals using #12 to #18 AWG wires


Table 1: Average RMS Current

E50 Speaker Strobes

E50 Strobe Current - Wall Mount

241575W

24MCW

24MCWH

1575cd

15cd

30cd

75cd

110cd

135cd

185cd

24 vdc

0.06

0.041

0.063

0.109

0.14

0.195

0.27

UL max*

0.09

0.06

0.092

0.165

0.22

0.3

0.42

 

 

 

Table 2: E50 UL Reverberant dBA @ 10 Feet**

watts

1/8

1/4

1/2

1

2

E50 Speaker

77

79.5

82.5

85

88

E50 Speaker Strobe

77

79.5

82.5

85

88

 

**dBA ratings are based on UL testing under UL Standard 1480

 

Description
The Wheelock Series E50 Speakers and Speaker Strobes feature high efficiency sound output, with dual voltage (25/70 VRMS) capability and field selectable taps from 1/8 to 2 watts. They are designed to provide a sleek, aesthetic appearance for emergency voice/alarm communications systems. All Series E50 models mount to standard 4” x 2-1/8” electrical boxes (with no extension ring required) and incorporate a speaker mounting plate for faster installation. The grille cover snaps on so no mounting screws are visible. Attractive surface boxes are also available for surface installations.
The Series E50 Speaker Strobe models use Wheelock low current draw Series RSS strobes for wall mounted applications. Strobe options include patented MCW multi-candela strobes with field selectable candela settings of 15/30/75/110 cd or high intensity MCWH strobes with field selectable 135/185 candela. Models with 1575 candela (75 cd on axis) are also offered.
Series E50 Speakers and Speaker Strobes provide high audio output with clear audibility and are designed to meet the critical needs of the life safety industry for effective emergency voice communications, tone signaling and visible signaling to alert the hearing impaired.
The strobe portion of all Series E Speaker Strobes may be synchronized when used in conjunction with the Wheelock SM, DSM Sync Modules or the Wheelock’s PS-24-8MC Power Supply with Patented Sync Protocol. Wheelock synchronized strobes offer an easy way to comply with ADA and NFPA regulations concerning photosensitive epilepsy.
Series E50 Speaker Strobes are UL Listed for indoor use under Standard 1971 (Signaling Devices for the Hearing-Impaired) and Standard 1480 (Speaker Appliances). All inputs employ IN/OUT wiring terminals for fast installation using #12 to #18 AWG wiring and are compatible with FACP line supervision.
Color options for the Series E50 Speakers and Speaker Strobes are red or off-white.

Features
• Approvals include: UL Standard 1971, UL Standard 1480, New York City (MEA), California State Fire Marshal (CSFM), Factory Mutual (FM) and Chicago (BFP). See approvals by model in Specifications and Ordering Information
• ADA/NFPA/ANSI compliant
• Complies with OSHA 29 Part 1910.165
• Wall mount speaker strobe models with field selectable candela settings of 15/30/75/110cd or 135/185cd (Multi-Candela models), or 1575cd (Single Candela model)
• Field selectable taps for 25 or 70 VRMS operation from 1/8 watt up to 2 watts
• High efficiency design for maximum output at minimum wattage across a frequency range of 400 to 4000 HZ
• 24 VDC strobes produce 1 flash per second with wide UL “Regulated Voltage” of 16 to 33 volts using filtered DC or unfiltered VRMS input voltage
• Synchronize with Wheelock SM, DSM or Wheelock PS-12/24-8CP and PS-12/24-8MP Power Supply with built-in sync protocol
• Mount to 4” square x 2-1/8” deep backbox with no extension ring required
• Snap on grille cover with no visible mounting screws
• Fast installation with IN/OUT screw terminals using #12 to #18 AWG wires


Table 1: Average RMS Current

E50 Speaker Strobes

E50 Strobe Current - Wall Mount

241575W

24MCW

24MCWH

1575cd

15cd

30cd

75cd

110cd

135cd

185cd

24 vdc

0.06

0.041

0.063

0.109

0.14

0.195

0.27

UL max*

0.09

0.06

0.092

0.165

0.22

0.3

0.42

 

 

 

Table 2: E50 UL Reverberant dBA @ 10 Feet**

watts

1/8

1/4

1/2

1

2

E50 Speaker

77

79.5

82.5

85

88

E50 Speaker Strobe

77

79.5

82.5

85

88

 

**dBA ratings are based on UL testing under UL Standard 1480

 

Wheelock E50-24MCWH-FW - SPEAKER STROBE MULTI CANDELLA WHITE 24 VOLT Wheelock ECHSG70W-FR - GRILLE FOR E70/STROBE - RED
Description
The Wheelock Series E50 Speakers and Speaker Strobes feature high efficiency sound output, with dual voltage (25/70 VRMS) capability and field selectable taps from 1/8 to 2 watts. They are designed to provide a sleek, aesthetic appearance for emergency voice/alarm communications systems. All Series E50 models mount to standard 4” x 2-1/8” electrical boxes (with no extension ring required) and incorporate a speaker mounting plate for faster installation. The grille cover snaps on so no mounting screws are visible. Attractive surface boxes are also available for surface installations.
The Series E50 Speaker Strobe models use Wheelock low current draw Series RSS strobes for wall mounted applications. Strobe options include patented MCW multi-candela strobes with field selectable candela settings of 15/30/75/110 cd or high intensity MCWH strobes with field selectable 135/185 candela. Models with 1575 candela (75 cd on axis) are also offered.
Series E50 Speakers and Speaker Strobes provide high audio output with clear audibility and are designed to meet the critical needs of the life safety industry for effective emergency voice communications, tone signaling and visible signaling to alert the hearing impaired.
The strobe portion of all Series E Speaker Strobes may be synchronized when used in conjunction with the Wheelock SM, DSM Sync Modules or the Wheelock’s PS-24-8MC Power Supply with Patented Sync Protocol. Wheelock synchronized strobes offer an easy way to comply with ADA and NFPA regulations concerning photosensitive epilepsy.
Series E50 Speaker Strobes are UL Listed for indoor use under Standard 1971 (Signaling Devices for the Hearing-Impaired) and Standard 1480 (Speaker Appliances). All inputs employ IN/OUT wiring terminals for fast installation using #12 to #18 AWG wiring and are compatible with FACP line supervision.
Color options for the Series E50 Speakers and Speaker Strobes are red or off-white.

Features
• Approvals include: UL Standard 1971, UL Standard 1480, New York City (MEA), California State Fire Marshal (CSFM), Factory Mutual (FM) and Chicago (BFP). See approvals by model in Specifications and Ordering Information
• ADA/NFPA/ANSI compliant
• Complies with OSHA 29 Part 1910.165
• Wall mount speaker strobe models with field selectable candela settings of 15/30/75/110cd or 135/185cd (Multi-Candela models), or 1575cd (Single Candela model)
• Field selectable taps for 25 or 70 VRMS operation from 1/8 watt up to 2 watts
• High efficiency design for maximum output at minimum wattage across a frequency range of 400 to 4000 HZ
• 24 VDC strobes produce 1 flash per second with wide UL “Regulated Voltage” of 16 to 33 volts using filtered DC or unfiltered VRMS input voltage
• Synchronize with Wheelock SM, DSM or Wheelock PS-12/24-8CP and PS-12/24-8MP Power Supply with built-in sync protocol
• Mount to 4” square x 2-1/8” deep backbox with no extension ring required
• Snap on grille cover with no visible mounting screws
• Fast installation with IN/OUT screw terminals using #12 to #18 AWG wires


Table 1: Average RMS Current

E50 Speaker Strobes

E50 Strobe Current - Wall Mount

241575W

24MCW

24MCWH

1575cd

15cd

30cd

75cd

110cd

135cd

185cd

24 vdc

0.06

0.041

0.063

0.109

0.14

0.195

0.27

UL max*

0.09

0.06

0.092

0.165

0.22

0.3

0.42

 

 

 

Table 2: E50 UL Reverberant dBA @ 10 Feet**

watts

1/8

1/4

1/2

1

2

E50 Speaker

77

79.5

82.5

85

88

E50 Speaker Strobe

77

79.5

82.5

85

88

 

**dBA ratings are based on UL testing under UL Standard 1480

 

Wheelock ECHSG70W-FR - GRILLE FOR E70/STROBE - RED

   
 
 
 

Enter your email for a chance to WIN $100 Amex Gift Card.

Please Enter Your Email Address

*One entry per household please