You are here: Home > Shop Brands > MicroTek Electronics > MiniLink Ethernet Series
We found 31 results matching your criteria.
Sort By:
Page of 3
ACTi Corporation ACM-5601 - MEGA PIXEL 1.3M CMOS MPEG 4 BOX CAMERA POE ACTi Corporation ACM-5611 - MEGA PIXEL DAY/NIGHT 1.3M CMOS MPEG-4 BOX CAMERA

ACTi offers a series of high video quality and cost competitive IP Megapixel cameras for the requirements to see clear night mode and details demanding videos. With the launch of ACM-5611, which is bundle with the IR Corrected Lens, you not only could enjoy the high quality but also with EXTREMELY low budget. This camera definitely is the best quality and price IP Megapixel in its class.

Main Features

• 1/3” Micron Progressive Scan CMOS
• Day and night function with Mechanical IR Cut Filter (ACM-5611)
• Bundled with f4.2mm / F1.8 Megapixel fixed lens
• 0.5 Lux (ACM-5601) / 0.05 Lux (ACM-5611) at F1.8
• Shutter Speed, White Balance, Exposure, Gain Controls supported
• Selectable MPEG-4 / MJPEG compression
• Up to SXGA resolution at 8 FPS
• Multi-stream with variable frame rate in the same compression
• Two-way audio supported
• Hardware motion detection, Digital Input / Transistor Output
• DC 12 V or Power over Ethernet (IEEE 802.3af) supported



Device: Micron Progressive Scan CMOS
Size: 1/3 inch
Effective Pixels: 1280 x 1024
Color: 0.5 Lux at F1.8 (30 IRE,MAX AGC)
B/W: N/A 0.05 Lux at F1.8 (30 IRE,MAX AGC)
CDS Sensor: N/A Yes
IR Sensitivity: N/A from 700 nm to 1100 nm
Lens Mount: C /CS (with adaptor)
Focal Length: f4.2 mm / F1.8
Viewing Angle: 75° (Horizontal)
Sync. System: Internal
Mechanical IR Cut Filter: N/A Yes
Motion Detection: Yes (3 Windows)
Electronic Shutter: 1/10 ~ 1/2,000 sec. (60Hz); 1/10 ~ 1/2,000 sec. (50Hz)
Flickerless: 1/120 sec. (60Hz); 1/100 sec. (50Hz)
BLC: Yes
AGC: Automatic (User defined)
White Balance: 6 modes (AUTO, INDOOR1, INDOOR2, OUTDOOR1, OUTDOOR2, HOLD CURRENT, MANUAL) configurable
S/N Ratio: Better than 44 dB
Compression: MPEG-4 SP, MJPEG selectable
Picture Resolution: SXGA (1280 x 1024) at 8 fps
HD720 (1280 x 720) at 10 fps
VGA (640 x 480) at 30 fps
Image Frame Rate: Up to 8 fps at SXGA resolution; Up to 10 fps at HD720 resolution; Up to 30 fps at VGA resolution
Compression: 8 kHz, Mono, PCM
Audio Line Input: Unbalanced, 1.4Vp-p, 1Vrms, 3.5 mm Phone Jack
Compression: 8 kHz, Mono, PCM
Audio Line Output: Unbalanced, 1.4Vp-p, 1Vrms, 3.5 mm Phone Jack
Digital Input: 1, terminal block
Transistor Output: 1, terminal block
Reset Button: Factory default
LED: System status
Ethernet: Ethernet(10/100Base-T), RJ-45 connector
Protocol: TCP, UDP, IP, HTTP, DHCP, PPPoE, RTP, RTSP, FTP, SMTP, DNS, DDNS, NTP, ICMP, IGMP, ARP, 3GPP
Web Browser: Microsoft Internet Explorer 6.0 or above
SDK: ACTi SDK-10000
Security: Password protection: configured by the administrator
Temperature: 0 ºC ~ 50 ºC (32 ºF ~ 122 ºF)
Power Requirement: PoE (IEEE802.3af) with Class 3
Power Consumption: 3.3 W (DC 12 V)
4.3 W (PoE)
Dimensions (WxHxD): 67 mm x 55 mm x 129.5 mm
(2.64” x 2.17” x 5.10”)
Weight: 400 g (0.88 lb)

ACTi offers a series of high video quality and cost competitive IP Megapixel cameras for the requirements to see clear night mode and details demanding videos. With the launch of ACM-5611, which is bundle with the IR Corrected Lens, you not only could enjoy the high quality but also with EXTREMELY low budget. This camera definitely is the best quality and price IP Megapixel in its class.

Main Features

• 1/3” Micron Progressive Scan CMOS
• Day and night function with Mechanical IR Cut Filter (ACM-5611)
• Bundled with f4.2mm / F1.8 Megapixel fixed lens
• 0.5 Lux (ACM-5601) / 0.05 Lux (ACM-5611) at F1.8
• Shutter Speed, White Balance, Exposure, Gain Controls supported
• Selectable MPEG-4 / MJPEG compression
• Up to SXGA resolution at 8 FPS
• Multi-stream with variable frame rate in the same compression
• Two-way audio supported
• Hardware motion detection, Digital Input / Transistor Output
• DC 12 V or Power over Ethernet (IEEE 802.3af) supported



Device: Micron Progressive Scan CMOS
Size: 1/3 inch
Effective Pixels: 1280 x 1024
Color: 0.5 Lux at F1.8 (30 IRE,MAX AGC)
B/W: N/A 0.05 Lux at F1.8 (30 IRE,MAX AGC)
CDS Sensor: N/A Yes
IR Sensitivity: N/A from 700 nm to 1100 nm
Lens Mount: C /CS (with adaptor)
Focal Length: f4.2 mm / F1.8
Viewing Angle: 75° (Horizontal)
Sync. System: Internal
Mechanical IR Cut Filter: N/A Yes
Motion Detection: Yes (3 Windows)
Electronic Shutter: 1/10 ~ 1/2,000 sec. (60Hz); 1/10 ~ 1/2,000 sec. (50Hz)
Flickerless: 1/120 sec. (60Hz); 1/100 sec. (50Hz)
BLC: Yes
AGC: Automatic (User defined)
White Balance: 6 modes (AUTO, INDOOR1, INDOOR2, OUTDOOR1, OUTDOOR2, HOLD CURRENT, MANUAL) configurable
S/N Ratio: Better than 44 dB
Compression: MPEG-4 SP, MJPEG selectable
Picture Resolution: SXGA (1280 x 1024) at 8 fps
HD720 (1280 x 720) at 10 fps
VGA (640 x 480) at 30 fps
Image Frame Rate: Up to 8 fps at SXGA resolution; Up to 10 fps at HD720 resolution; Up to 30 fps at VGA resolution
Compression: 8 kHz, Mono, PCM
Audio Line Input: Unbalanced, 1.4Vp-p, 1Vrms, 3.5 mm Phone Jack
Compression: 8 kHz, Mono, PCM
Audio Line Output: Unbalanced, 1.4Vp-p, 1Vrms, 3.5 mm Phone Jack
Digital Input: 1, terminal block
Transistor Output: 1, terminal block
Reset Button: Factory default
LED: System status
Ethernet: Ethernet(10/100Base-T), RJ-45 connector
Protocol: TCP, UDP, IP, HTTP, DHCP, PPPoE, RTP, RTSP, FTP, SMTP, DNS, DDNS, NTP, ICMP, IGMP, ARP, 3GPP
Web Browser: Microsoft Internet Explorer 6.0 or above
SDK: ACTi SDK-10000
Security: Password protection: configured by the administrator
Temperature: 0 ºC ~ 50 ºC (32 ºF ~ 122 ºF)
Power Requirement: PoE (IEEE802.3af) with Class 3
Power Consumption: 3.3 W (DC 12 V)
4.3 W (PoE)
Dimensions (WxHxD): 67 mm x 55 mm x 129.5 mm
(2.64” x 2.17” x 5.10”)
Weight: 400 g (0.88 lb)

HAI 36A05-2 UPB PIM to computer cable Microtek MLWEM Wireless Ethernet Module
HAI 36A052 UPB PIM to computer cable

The UPB™ PIM to computer cable is used to connect the UPB™ PIM (HAI Part Number 36A00-1) to a computer's standard DB-9 serial port for use with HAI UPB™ UPStart configuration software.

Product Features:

• Transmits up to 20Mbps in standard mode and 40Mbps in turbo mode

• 9 user selectable channels, 802.11a technology

• Switch selectable setup with LED indicators for ease of operation

• Connects with standard Ethernet devices – DVRs, video servers, IP cameras, router/hubs, etc.

• Uses encrypted communication for secure transmission

• Transmits up to 30 miles

• Unique compact, rugged modular design for easy installation - plug and play operability


The MiniLink Wireless Ethernet system is a dual band wireless transmission system. It operates in the license free 5.3 and 5.8 GHz U-NII bands. The system consists of dual 802.11a RF modules. A secure encryption method is used to prevent unauthorized access to the system.

The MiniLink Wireless Ethernet (WES) system is designed as a plug and play CAT5/Ethernet cable replacement device. Installing the system is as easy as mounting the RF modules, pointing them at each other and connecting the power and Ethernet/CAT5 cables. Three LED indicators on the back of each module give power, link activity and signal level status.

The WES modules transmit bi-directional data at 20 Mbps in standard mode and 40 Mbps in turbo mode. Standard operation requires no computer programming. For advanced setup, such as WEP encryption programming, turbo mode, setting IP addresses and User ID/Password changes, the system employs an easy to use web browser interface. WES modules operate on channels 1 – 4 in the 5.3 GHz band and channels 5 – 9 in the 5.8 GHz band. Individual channels are selected via a rotary switch on the side of each module.

The MiniLink Wireless Ethernet system enables a wide variety of IP cameras, DVRs, encoder/decoders and web servers to be used across wireless line-ofsite links in ranges of 2500 feet to 30 miles. In applications where it is not possible, cost effective or desirable to run a cable, WES modules are an ideal solution. Following are a few examples:

• Security & Surveillance – School and Corporate Campuses, Warehouses, Retail, Manufacturing, Public Attractions, Ranches, Stables and Farms

• Intelligent Traffic Control Systems – Highways, Intersections, Parking Lots and Garages

• Homeland Security – Ports, Airports, Borders, Utilities, Parks and Monuments

• Government Agency and Military – Bases, Forward Deployment, Special Operations Teams

• Law Enforcement – Local and State Police, Bomb Squads, Search and Rescue Teams

Microtek MLWEMP Ethernet Module Patch Antenna Microtek MLWES24 Wireless Ethernet System 2 And 4 Mile Range
Microtek MLWEMP Ethernet Module Patch Antenna Product Features:

• Transmits up to 20Mbps in standard mode and 40Mbps in turbo mode

• 9 user selectable channels, 802.11a technology

• Switch selectable setup with LED indicators for ease of operation

• Connects with standard Ethernet devices – DVRs, video servers, IP cameras, router/hubs, etc.

• Uses encrypted communication for secure transmission

• Transmits up to 30 miles

• Unique compact, rugged modular design for easy installation - plug and play operability


The MiniLink Wireless Ethernet system is a dual band wireless transmission system. It operates in the license free 5.3 and 5.8 GHz U-NII bands. The system consists of dual 802.11a RF modules. A secure encryption method is used to prevent unauthorized access to the system.

The MiniLink Wireless Ethernet (WES) system is designed as a plug and play CAT5/Ethernet cable replacement device. Installing the system is as easy as mounting the RF modules, pointing them at each other and connecting the power and Ethernet/CAT5 cables. Three LED indicators on the back of each module give power, link activity and signal level status.

The WES modules transmit bi-directional data at 20 Mbps in standard mode and 40 Mbps in turbo mode. Standard operation requires no computer programming. For advanced setup, such as WEP encryption programming, turbo mode, setting IP addresses and User ID/Password changes, the system employs an easy to use web browser interface. WES modules operate on channels 1 – 4 in the 5.3 GHz band and channels 5 – 9 in the 5.8 GHz band. Individual channels are selected via a rotary switch on the side of each module.

The MiniLink Wireless Ethernet system enables a wide variety of IP cameras, DVRs, encoder/decoders and web servers to be used across wireless line-ofsite links in ranges of 2500 feet to 30 miles. In applications where it is not possible, cost effective or desirable to run a cable, WES modules are an ideal solution. Following are a few examples:

• Security & Surveillance – School and Corporate Campuses, Warehouses, Retail, Manufacturing, Public Attractions, Ranches, Stables and Farms

• Intelligent Traffic Control Systems – Highways, Intersections, Parking Lots and Garages

• Homeland Security – Ports, Airports, Borders, Utilities, Parks and Monuments

• Government Agency and Military – Bases, Forward Deployment, Special Operations Teams

• Law Enforcement – Local and State Police, Bomb Squads, Search and Rescue Teams

Microtek MLWES2500 2500 Foot Wireless Ethernet System Microtek MLWES30 30 Mile Wireless Ethernet System
Product Features:

• Transmits up to 20Mbps in standard mode and 40Mbps in turbo mode

• 9 user selectable channels, 802.11a technology

• Switch selectable setup with LED indicators for ease of operation

• Connects with standard Ethernet devices – DVRs, video servers, IP cameras, router/hubs, etc.

• Uses encrypted communication for secure transmission

• Transmits up to 30 miles

• Unique compact, rugged modular design for easy installation - plug and play operability


The MiniLink Wireless Ethernet system is a dual band wireless transmission system. It operates in the license free 5.3 and 5.8 GHz U-NII bands. The system consists of dual 802.11a RF modules. A secure encryption method is used to prevent unauthorized access to the system.

The MiniLink Wireless Ethernet (WES) system is designed as a plug and play CAT5/Ethernet cable replacement device. Installing the system is as easy as mounting the RF modules, pointing them at each other and connecting the power and Ethernet/CAT5 cables. Three LED indicators on the back of each module give power, link activity and signal level status.

The WES modules transmit bi-directional data at 20 Mbps in standard mode and 40 Mbps in turbo mode. Standard operation requires no computer programming. For advanced setup, such as WEP encryption programming, turbo mode, setting IP addresses and User ID/Password changes, the system employs an easy to use web browser interface. WES modules operate on channels 1 – 4 in the 5.3 GHz band and channels 5 – 9 in the 5.8 GHz band. Individual channels are selected via a rotary switch on the side of each module.

The MiniLink Wireless Ethernet system enables a wide variety of IP cameras, DVRs, encoder/decoders and web servers to be used across wireless line-ofsite links in ranges of 2500 feet to 30 miles. In applications where it is not possible, cost effective or desirable to run a cable, WES modules are an ideal solution. Following are a few examples:

• Security & Surveillance – School and Corporate Campuses, Warehouses, Retail, Manufacturing, Public Attractions, Ranches, Stables and Farms

• Intelligent Traffic Control Systems – Highways, Intersections, Parking Lots and Garages

• Homeland Security – Ports, Airports, Borders, Utilities, Parks and Monuments

• Government Agency and Military – Bases, Forward Deployment, Special Operations Teams

• Law Enforcement – Local and State Police, Bomb Squads, Search and Rescue Teams


UPC:671892006052

Product Features:

• Transmits up to 20Mbps in standard mode and 40Mbps in turbo mode

• 9 user selectable channels, 802.11a technology

• Switch selectable setup with LED indicators for ease of operation

• Connects with standard Ethernet devices – DVRs, video servers, IP cameras, router/hubs, etc.

• Uses encrypted communication for secure transmission

• Transmits up to 30 miles

• Unique compact, rugged modular design for easy installation - plug and play operability


The MiniLink Wireless Ethernet system is a dual band wireless transmission system. It operates in the license free 5.3 and 5.8 GHz U-NII bands. The system consists of dual 802.11a RF modules. A secure encryption method is used to prevent unauthorized access to the system.

The MiniLink Wireless Ethernet (WES) system is designed as a plug and play CAT5/Ethernet cable replacement device. Installing the system is as easy as mounting the RF modules, pointing them at each other and connecting the power and Ethernet/CAT5 cables. Three LED indicators on the back of each module give power, link activity and signal level status.

The WES modules transmit bi-directional data at 20 Mbps in standard mode and 40 Mbps in turbo mode. Standard operation requires no computer programming. For advanced setup, such as WEP encryption programming, turbo mode, setting IP addresses and User ID/Password changes, the system employs an easy to use web browser interface.

WES modules operate on channels 1 – 4 in the 5.3 GHz band and channels 5 – 9 in the 5.8 GHz band. Individual channels are selected via a rotary switch on the side of each module.

The MiniLink Wireless Ethernet system enables a wide variety of IP cameras, DVRs, encoder/decoders and web servers to be used across wireless line-ofsite links in ranges of 2500 feet to 30 miles. In applications where it is not possible, cost effective or desirable to run a cable, WES modules are an ideal solution. Following are a few examples:

• Security & Surveillance – School and Corporate Campuses, Warehouses, Retail, Manufacturing, Public Attractions, Ranches, Stables and Farms

• Intelligent Traffic Control Systems – Highways, Intersections, Parking Lots and Garages

• Homeland Security – Ports, Airports, Borders, Utilities, Parks and Monuments

• Government Agency and Military – Bases, Forward Deployment, Special Operations Teams

• Law Enforcement – Local and State Police, Bomb Squads, Search and Rescue Teams


Microtek MLWES5250 Wireless Ethernet Kit Up To 2500' Microtek MLWES532 MiniLink 5.3GHz Wireless Ethernet System
Product Features:

• Transmits up to 20Mbps in standard mode and 40Mbps in turbo mode

• 9 user selectable channels, 802.11a technology

• Switch selectable setup with LED indicators for ease of operation

• Connects with standard Ethernet devices – DVRs, video servers, IP cameras, router/hubs, etc.

• Uses encrypted communication for secure transmission

• Transmits up to 30 miles

• Unique compact, rugged modular design for easy installation - plug and play operability


The MiniLink Wireless Ethernet system is a dual band wireless transmission system. It operates in the license free 5.3 and 5.8 GHz U-NII bands. The system consists of dual 802.11a RF modules. A secure encryption method is used to prevent unauthorized access to the system.

The MiniLink Wireless Ethernet (WES) system is designed as a plug and play CAT5/Ethernet cable replacement device. Installing the system is as easy as mounting the RF modules, pointing them at each other and connecting the power and Ethernet/CAT5 cables. Three LED indicators on the back of each module give power, link activity and signal level status.

The WES modules transmit bi-directional data at 20 Mbps in standard mode and 40 Mbps in turbo mode. Standard operation requires no computer programming. For advanced setup, such as WEP encryption programming, turbo mode, setting IP addresses and User ID/Password changes, the system employs an easy to use web browser interface.

WES modules operate on channels 1 – 4 in the 5.3 GHz band and channels 5 – 9 in the 5.8 GHz band. Individual channels are selected via a rotary switch on the side of each module.

The MiniLink Wireless Ethernet system enables a wide variety of IP cameras, DVRs, encoder/decoders and web servers to be used across wireless line-ofsite links in ranges of 2500 feet to 30 miles. In applications where it is not possible, cost effective or desirable to run a cable, WES modules are an ideal solution. Following are a few examples:

• Security & Surveillance – School and Corporate Campuses, Warehouses, Retail, Manufacturing, Public Attractions, Ranches, Stables and Farms

• Intelligent Traffic Control Systems – Highways, Intersections, Parking Lots and Garages

• Homeland Security – Ports, Airports, Borders, Utilities, Parks and Monuments

• Government Agency and Military – Bases, Forward Deployment, Special Operations Teams

• Law Enforcement – Local and State Police, Bomb Squads, Search and Rescue Teams


Each ML-WES5-2500 Kit includes:

2 – RF Modules with integral patch antennas

2 – Pole/wall mount brackets and hardware

2 – PoE power injection modules with power supplies

Product Features:

• Transmits up to 20Mbps in standard mode and 40Mbps in turbo mode

• 9 user selectable channels, 802.11a technology

• Switch selectable setup with LED indicators for ease of operation

• Connects with standard Ethernet devices – DVRs, video servers, IP cameras, router/hubs, etc.

• Uses encrypted communication for secure transmission

• Transmits up to 30 miles

• Unique compact, rugged modular design for easy installation - plug and play operability


The MiniLink Wireless Ethernet system is a dual band wireless transmission system. It operates in the license free 5.3 and 5.8 GHz U-NII bands. The system consists of dual 802.11a RF modules. A secure encryption method is used to prevent unauthorized access to the system.

The MiniLink Wireless Ethernet (WES) system is designed as a plug and play CAT5/Ethernet cable replacement device. Installing the system is as easy as mounting the RF modules, pointing them at each other and connecting the power and Ethernet/CAT5 cables. Three LED indicators on the back of each module give power, link activity and signal level status.

The WES modules transmit bi-directional data at 20 Mbps in standard mode and 40 Mbps in turbo mode. Standard operation requires no computer programming. For advanced setup, such as WEP encryption programming, turbo mode, setting IP addresses and User ID/Password changes, the system employs an easy to use web browser interface.

WES modules operate on channels 1 – 4 in the 5.3 GHz band and channels 5 – 9 in the 5.8 GHz band. Individual channels are selected via a rotary switch on the side of each module.

The MiniLink Wireless Ethernet system enables a wide variety of IP cameras, DVRs, encoder/decoders and web servers to be used across wireless line-ofsite links in ranges of 2500 feet to 30 miles. In applications where it is not possible, cost effective or desirable to run a cable, WES modules are an ideal solution. Following are a few examples:

• Security & Surveillance – School and Corporate Campuses, Warehouses, Retail, Manufacturing, Public Attractions, Ranches, Stables and Farms

• Intelligent Traffic Control Systems – Highways, Intersections, Parking Lots and Garages

• Homeland Security – Ports, Airports, Borders, Utilities, Parks and Monuments

• Government Agency and Military – Bases, Forward Deployment, Special Operations Teams

• Law Enforcement – Local and State Police, Bomb Squads, Search and Rescue Teams

Microtek MLWES582 Transceiver For Digital Or Wireless Ethernet System Microtek MLWES5830 5.8GHz MiniLink Wireless Ethernet System
Product Features:

• Transmits up to 20Mbps in standard mode and 40Mbps in turbo mode

• 9 user selectable channels, 802.11a technology

• Switch selectable setup with LED indicators for ease of operation

• Connects with standard Ethernet devices – DVRs, video servers, IP cameras, router/hubs, etc.

• Uses encrypted communication for secure transmission

• Transmits up to 30 miles

• Unique compact, rugged modular design for easy installation - plug and play operability


The MiniLink Wireless Ethernet system is a dual band wireless transmission system. It operates in the license free 5.3 and 5.8 GHz U-NII bands. The system consists of dual 802.11a RF modules. A secure encryption method is used to prevent unauthorized access to the system.

The MiniLink Wireless Ethernet (WES) system is designed as a plug and play CAT5/Ethernet cable replacement device. Installing the system is as easy as mounting the RF modules, pointing them at each other and connecting the power and Ethernet/CAT5 cables. Three LED indicators on the back of each module give power, link activity and signal level status.

The WES modules transmit bi-directional data at 20 Mbps in standard mode and 40 Mbps in turbo mode. Standard operation requires no computer programming. For advanced setup, such as WEP encryption programming, turbo mode, setting IP addresses and User ID/Password changes, the system employs an easy to use web browser interface.

WES modules operate on channels 1 – 4 in the 5.3 GHz band and channels 5 – 9 in the 5.8 GHz band. Individual channels are selected via a rotary switch on the side of each module.

The MiniLink Wireless Ethernet system enables a wide variety of IP cameras, DVRs, encoder/decoders and web servers to be used across wireless line-ofsite links in ranges of 2500 feet to 30 miles. In applications where it is not possible, cost effective or desirable to run a cable, WES modules are an ideal solution. Following are a few examples:

• Security & Surveillance – School and Corporate Campuses, Warehouses, Retail, Manufacturing, Public Attractions, Ranches, Stables and Farms

• Intelligent Traffic Control Systems – Highways, Intersections, Parking Lots and Garages

• Homeland Security – Ports, Airports, Borders, Utilities, Parks and Monuments

• Government Agency and Military – Bases, Forward Deployment, Special Operations Teams

• Law Enforcement – Local and State Police, Bomb Squads, Search and Rescue Teams

Product Features:

• Transmits up to 20Mbps in standard mode and 40Mbps in turbo mode

• 9 user selectable channels, 802.11a technology

• Switch selectable setup with LED indicators for ease of operation

• Connects with standard Ethernet devices – DVRs, video servers, IP cameras, router/hubs, etc.

• Uses encrypted communication for secure transmission

• Transmits up to 30 miles

• Unique compact, rugged modular design for easy installation - plug and play operability


The MiniLink Wireless Ethernet system is a dual band wireless transmission system. It operates in the license free 5.3 and 5.8 GHz U-NII bands. The system consists of dual 802.11a RF modules. A secure encryption method is used to prevent unauthorized access to the system.

The MiniLink Wireless Ethernet (WES) system is designed as a plug and play CAT5/Ethernet cable replacement device. Installing the system is as easy as mounting the RF modules, pointing them at each other and connecting the power and Ethernet/CAT5 cables. Three LED indicators on the back of each module give power, link activity and signal level status.

The WES modules transmit bi-directional data at 20 Mbps in standard mode and 40 Mbps in turbo mode. Standard operation requires no computer programming. For advanced setup, such as WEP encryption programming, turbo mode, setting IP addresses and User ID/Password changes, the system employs an easy to use web browser interface.

WES modules operate on channels 1 – 4 in the 5.3 GHz band and channels 5 – 9 in the 5.8 GHz band. Individual channels are selected via a rotary switch on the side of each module.

The MiniLink Wireless Ethernet system enables a wide variety of IP cameras, DVRs, encoder/decoders and web servers to be used across wireless line-ofsite links in ranges of 2500 feet to 30 miles. In applications where it is not possible, cost effective or desirable to run a cable, WES modules are an ideal solution. Following are a few examples:

• Security & Surveillance – School and Corporate Campuses, Warehouses, Retail, Manufacturing, Public Attractions, Ranches, Stables and Farms

• Intelligent Traffic Control Systems – Highways, Intersections, Parking Lots and Garages

• Homeland Security – Ports, Airports, Borders, Utilities, Parks and Monuments

• Government Agency and Military – Bases, Forward Deployment, Special Operations Teams

• Law Enforcement – Local and State Police, Bomb Squads, Search and Rescue Teams

   
 
 
 

Enter your email for a chance to WIN $100 Amex Gift Card.

Please Enter Your Email Address

*One entry per household please