You are here: Home > Shop Brands > MicroTek Electronics > Antennas
We found 10 results matching your criteria.
Sort By:
Page of 1
GE Interlogix MP-AP633A 200-Ft Long Range, 80-Ft Wide Angle PIR Detector Microtek 1MTRD 1 Meter Dish Receiver Antenna

200-Ft Long Range, 80-Ft Wide Angle PIR Detector

The AP adaptive passive infrared detectors feature advanced optical design that provides a far larger coverage area than conventional sensors. This enables installers to use just one sensor in applications where two or more sensors are normally required. The savings in equipment, wiring and labor costs can be substantial.

Features:

  • 12 coverage patterns include 200 ft. long range and 80 ft. wide angle in one sensor
  • Microprocessor-based "4D" signal processing provides maximum immunity to false alarms
  • Solid 40 ft. center curtain available with all 12 coverage patterns
  • Excellent for high security applications
  • Accessory Features:

    Weather enclosure can be painted any nonmetallic color

    Wall & Pole mount hardware included

    Multiple transmitter/receiver mounting configurations available

    LNB mounting hardware included with ML 5.8- 1000E & 2500E

    Mounting block included in weather enclosure with ML 5.8 series

    18 inch & 1 meter dish antennas for ML 5.8 series

    6 x 6 patch antenna for ML 5.8 series

    4 x 5 & 12 x 12 patch antenna for ML 2.4 series and ML Data 2400

    36 grid dish for ML 2.4 series

    41.5 yagi antennas for ML Data 900 series


    MiniLink weather enclosures can be pole or wallmounted, are large enough to accommodate combinations of transmitters and antennas and come with all necessary mounting hardware. In addition, they can be painted any non-metallic color to blend into the surroundings.

    A variety of transmit and receive antennas are available depending on the range and type of system being designed. Review the distance specifications chart for available configurations.

    All MiniLink Transmitters, Receivers and Transceivers must be mounted in an environmental enclosure if used outdoors or in an area susceptible to water and/or dust.

    MiniLink antennas and LNBs are weather proof and do not need to be mounted in an enclosure.


    UPC:615798312343

    Microtek 34P 3x4" Patch Antenna Microtek 3DGH 3' Grid Disk Antenna
    Accessory Features:

    Weather enclosure can be painted any nonmetallic color

    Wall & Pole mount hardware included

    Multiple transmitter/receiver mounting configurations available

    LNB mounting hardware included with ML 5.8- 1000E & 2500E

    Mounting block included in weather enclosure with ML 5.8 series

    18 inch & 1 meter dish antennas for ML 5.8 series

    6 x 6 patch antenna for ML 5.8 series

    4 x 5 & 12 x 12 patch antenna for ML 2.4 series and ML Data 2400

    36 grid dish for ML 2.4 series

    41.5 yagi antennas for ML Data 900 series


    MiniLink weather enclosures can be pole or wallmounted, are large enough to accommodate combinations of transmitters and antennas and come with all necessary mounting hardware. In addition, they can be painted any non-metallic color to blend into the surroundings.

    A variety of transmit and receive antennas are available depending on the range and type of system being designed. Review the distance specifications chart for available configurations.

    All MiniLink Transmitters, Receivers and Transceivers must be mounted in an environmental enclosure if used outdoors or in an area susceptible to water and/or dust.

    MiniLink antennas and LNBs are weather proof and do not need to be mounted in an enclosure.


    UPC:671892000302

    Accessory Features:

    Weather enclosure can be painted any nonmetallic color

    Wall & Pole mount hardware included

    Multiple transmitter/receiver mounting configurations available

    LNB mounting hardware included with ML 5.8- 1000E & 2500E

    Mounting block included in weather enclosure with ML 5.8 series

    18 inch & 1 meter dish antennas for ML 5.8 series

    6 x 6 patch antenna for ML 5.8 series

    4 x 5 & 12 x 12 patch antenna for ML 2.4 series and ML Data 2400

    36 grid dish for ML 2.4 series

    41.5 yagi antennas for ML Data 900 series


    MiniLink weather enclosures can be pole or wallmounted, are large enough to accommodate combinations of transmitters and antennas and come with all necessary mounting hardware. In addition, they can be painted any non-metallic color to blend into the surroundings.

    A variety of transmit and receive antennas are available depending on the range and type of system being designed. Review the distance specifications chart for available configurations.

    All MiniLink Transmitters, Receivers and Transceivers must be mounted in an environmental enclosure if used outdoors or in an area susceptible to water and/or dust.

    MiniLink antennas and LNBs are weather proof and do not need to be mounted in an enclosure.


    UPC:671892001903

    Microtek ML58LNBP Mini Link 5.8LNB With 6" Patch Antenna Microtek PAT1212 12x12" Patch Antenna 17DBI HW
    Accessory Features:

    Weather enclosure can be painted any nonmetallic color

    Wall & Pole mount hardware included

    Multiple transmitter/receiver mounting configurations available

    LNB mounting hardware included with ML 5.8- 1000E & 2500E

    Mounting block included in weather enclosure with ML 5.8 series

    18 inch & 1 meter dish antennas for ML 5.8 series

    6 x 6 patch antenna for ML 5.8 series

    4 x 5 & 12 x 12 patch antenna for ML 2.4 series and ML Data 2400

    36 grid dish for ML 2.4 series

    41.5 yagi antennas for ML Data 900 series


    MiniLink weather enclosures can be pole or wallmounted, are large enough to accommodate combinations of transmitters and antennas and come with all necessary mounting hardware. In addition, they can be painted any non-metallic color to blend into the surroundings.

    A variety of transmit and receive antennas are available depending on the range and type of system being designed. Review the distance specifications chart for available configurations.

    All MiniLink Transmitters, Receivers and Transceivers must be mounted in an environmental enclosure if used outdoors or in an area susceptible to water and/or dust.

    MiniLink antennas and LNBs are weather proof and do not need to be mounted in an enclosure.

    Accessory Features:

    Weather enclosure can be painted any nonmetallic color

    Wall & Pole mount hardware included

    Multiple transmitter/receiver mounting configurations available

    LNB mounting hardware included with ML 5.8- 1000E & 2500E

    Mounting block included in weather enclosure with ML 5.8 series

    18 inch & 1 meter dish antennas for ML 5.8 series

    6 x 6 patch antenna for ML 5.8 series

    4 x 5 & 12 x 12 patch antenna for ML 2.4 series and ML Data 2400

    36 grid dish for ML 2.4 series

    41.5 yagi antennas for ML Data 900 series


    MiniLink weather enclosures can be pole or wallmounted, are large enough to accommodate combinations of transmitters and antennas and come with all necessary mounting hardware. In addition, they can be painted any non-metallic color to blend into the surroundings.

    A variety of transmit and receive antennas are available depending on the range and type of system being designed. Review the distance specifications chart for available configurations.

    All MiniLink Transmitters, Receivers and Transceivers must be mounted in an environmental enclosure if used outdoors or in an area susceptible to water and/or dust.

    MiniLink antennas and LNBs are weather proof and do not need to be mounted in an enclosure.

    Microtek RD7 7" Rubber Duck Antenna Microtek YL 30"Yagi (700 Feet) Receiver Antenna
    Accessory Features:

    Weather enclosure can be painted any nonmetallic color

    Wall & Pole mount hardware included

    Multiple transmitter/receiver mounting configurations available

    LNB mounting hardware included with ML 5.8- 1000E & 2500E

    Mounting block included in weather enclosure with ML 5.8 series

    18 inch & 1 meter dish antennas for ML 5.8 series

    6 x 6 patch antenna for ML 5.8 series

    4 x 5 & 12 x 12 patch antenna for ML 2.4 series and ML Data 2400

    36 grid dish for ML 2.4 series

    41.5 yagi antennas for ML Data 900 series


    MiniLink weather enclosures can be pole or wallmounted, are large enough to accommodate combinations of transmitters and antennas and come with all necessary mounting hardware. In addition, they can be painted any non-metallic color to blend into the surroundings.

    A variety of transmit and receive antennas are available depending on the range and type of system being designed. Review the distance specifications chart for available configurations.

    All MiniLink Transmitters, Receivers and Transceivers must be mounted in an environmental enclosure if used outdoors or in an area susceptible to water and/or dust.

    MiniLink antennas and LNBs are weather proof and do not need to be mounted in an enclosure.


    UPC:671892000203

    Accessory Features:

    Weather enclosure can be painted any nonmetallic color

    Wall & Pole mount hardware included

    Multiple transmitter/receiver mounting configurations available

    LNB mounting hardware included with ML 5.8- 1000E & 2500E

    Mounting block included in weather enclosure with ML 5.8 series

    18 inch & 1 meter dish antennas for ML 5.8 series

    6 x 6 patch antenna for ML 5.8 series

    4 x 5 & 12 x 12 patch antenna for ML 2.4 series and ML Data 2400

    36 grid dish for ML 2.4 series

    41.5 yagi antennas for ML Data 900 series


    MiniLink weather enclosures can be pole or wallmounted, are large enough to accommodate combinations of transmitters and antennas and come with all necessary mounting hardware. In addition, they can be painted any non-metallic color to blend into the surroundings.

    A variety of transmit and receive antennas are available depending on the range and type of system being designed. Review the distance specifications chart for available configurations.

    All MiniLink Transmitters, Receivers and Transceivers must be mounted in an environmental enclosure if used outdoors or in an area susceptible to water and/or dust.

    MiniLink antennas and LNBs are weather proof and do not need to be mounted in an enclosure.


    UPC:671892001255

    Microtek YS 12" Yagi (400 Feet) Receiving Antenna HAI 10A11-1 Two-Way Audio/Voice Alarm Module
    Accessory Features:

    Weather enclosure can be painted any nonmetallic color

    Wall & Pole mount hardware included

    Multiple transmitter/receiver mounting configurations available

    LNB mounting hardware included with ML 5.8- 1000E & 2500E

    Mounting block included in weather enclosure with ML 5.8 series

    18 inch & 1 meter dish antennas for ML 5.8 series

    6 x 6 patch antenna for ML 5.8 series

    4 x 5 & 12 x 12 patch antenna for ML 2.4 series and ML Data 2400

    36 grid dish for ML 2.4 series

    41.5 yagi antennas for ML Data 900 series


    MiniLink weather enclosures can be pole or wallmounted, are large enough to accommodate combinations of transmitters and antennas and come with all necessary mounting hardware. In addition, they can be painted any non-metallic color to blend into the surroundings.

    A variety of transmit and receive antennas are available depending on the range and type of system being designed. Review the distance specifications chart for available configurations.

    All MiniLink Transmitters, Receivers and Transceivers must be mounted in an environmental enclosure if used outdoors or in an area susceptible to water and/or dust.

    MiniLink antennas and LNBs are weather proof and do not need to be mounted in an enclosure.


    UPC:671892001200

    The Model 10A11-1 Two-Way Audio/Voice Alarm Module allows two-way communication with a central station after an alarm, paging and listening from an on-premises or remote phone, annunciation of alarm and zone by voice, and voice messaging (not available on all systems). After an audible alarm, the module allows the central station to control the listen/talk mode. After a silent alarm, the module allows listen in only. Use with HAI Part Number 33A00-4 Omni Console with Built-In Speaker/Microphone, 33A00-20 Lumina Keypad with Built-In Speaker/Microphone, 28A00-1 Surface Speaker Microphone, or 28A00-2 Flush Speaker Microphone. The Model 10A11-1 may be used with Lumina, Lumina Pro, Omni LT, Omni, Omni II, Omni IIe, OmniPro and OmniPro II home control systems.

    Specifications:

    HAI Product No.: 10A11-1
    Dimensions: 6.75" x 3.25" x 1"
    Operating Voltage: 6 to 14 VDC
    Operating Current: 500 mA maximum
    Speaker Impedance: 8 ohm
    AGC Range: -22 dbm to +10 dbm
    Required Microphone Type: Condenser with built-in preamp
       
     
     
     

    Enter your email for a chance to WIN $100 Amex Gift Card.

    Please Enter Your Email Address

    *One entry per household please