You are here: Home > Shop Brands > Honeywell Video Surveillance & CCTV (formerly Ademco Video) > Camera Accessories
We found 11 results matching your criteria.

McAfee Secure sites help keep you safe from identity theft, credit card fraud, spyware, spam, viruses and online scams

Camera Accessories

  Housings & Mounts
  Power Supplies
  Software
  Surge Protectors
Housings & Mounts
Power Supplies
Software
Surge Protectors
Sort By:
Page of 1
Ademco Video APS2404UL 4 Output UL-Listed CCTV Power Supply Ademco Video APS2416UL 16 Output UL-Listed CCTV Power Supply

The APS2404UL is a UL Listed multi-output CCTV Power Supply that provides four individually fused outputs at 24 VAC. The Power Supply delivers a maximum of 4 Amps of power to 24 VAC CCTV cameras and accessories.

16 Output UL-Listed CCTV Power Supply

The APS2416UL is a UL Listed multi-output CCTV Power Supply that provides sixteen individually fused outputs at 24 VAC. The Power Supply delivers a maximum of 8 Amps of power to 24 VAC CCTV cameras and accessories.

Honeywell / Ademco Video ASP16RMK Rack Mount Kit for ASP16 Honeywell Video HCSP1 - Surge Protector for Video and Power
Honeywell / Ademco Video ASP16RMK Rack Mount Kit for ASP16 The Honeywell HCSP1 Surge Protector provides superior protection agains voltage spikes that can disable and permanently damage video equipment, including fixed cameras and recorders, causing loss of important data. Designed primarily for use with Honeywell surveillance systems, the HCSP1 Surge Protector is a necessary component to any fixed camera system providing continuous critical data.

Power surges are sudden increases in the voltage that powers your security system. These are common occurrences that normally go unnoticed, lasting only a fraction of a second. Yet, the adverse effects can decrease the life of electronic equipment, cause irreversible damage and cause interruption of service. While lightning is the most obvious and causes the most damage, the utility company is constantly generating irregular current resulting from overburdened power grids causing rolling surges as power stations adjust to regulate voltage. Something as simple as turning on an air conditioner can cause a surge in voltage. Honeywell’s HCSP1 can guard against damaging surges and keep surveillance systems protected and operating smoothly.

Market Opportunities
The Honeywell HCSP1 surge protector is the most dependable and cost efficient method to ensure video surveillance systems operate without interruption or damage caused by voltage spikes. Complete integrated network protection is offered in this essential system component. Costly service calls and down time can be virtually eliminated with the easy-to-install Honeywell HCSP1 Surge Protector.

Features

  • Dependable protection for fixed cameras, recorders and electronic surveillance equipment
  • Terminal strip connections for power
  • BNC connections for video
  • Single point grounding
  • Does not degrade video image
  • High-impact resistant housing
  • Three-Year Warranty
  • Lightweight (2 ounces)
  • Low-profile 3.86" H x 2.07" W x 1.4" D (9.8 cm x 5.26 cm x 3.55 cm
Honeywell Video HDCD8TP 8-Way RS485/RS232 to RS485 Bi-directional Distribution Box Honeywell Video HDSP1 - Surge Protector for Video, Power and Data
REPLACES ADCD8TP

The HDCD8TP is an 8-way bi-directional distribution box with connections for either halfduplex RS485 or RS232 control. There is an RS485 loop-through connection and RS485 termination links to enable several units to be connected in a daisy-chain wiring configuration.

The unit is powered by 12 Volts DC @ 250mA. There are three LEDs – one indicates power on and the other two indicate data being transmitted to or from the receivers.

p>The Honeywell HDSP1 Surge Protector provides superior protection against voltage spikes that can disable and permanently damage video equipment, including PTZ cameras and recorders, resulting in loss of important data. Designed primarily for use with Honeywell surveillance systems, the HDSP1 Surge Protector is a necessary component to any PTZ camera system providing continuous critical data.

Power surges are sudden increases in the voltage that powers your security system. These are common occurrences that normally go unnoticed, lasting only a fraction of a second. Yet, the adverse effects can decrease the life of electronic equipment, cause irreversible damage and cause interruption of service. While lightning is the most obvious and causes the most damage, the utility company is constantly generating irregular current resulting from overburdened power grids causing rolling surges as power stations adjust to regulate voltage. Something as simple as turning on an air conditioner can cause a surge in voltage. Honeywell’s HDSP1 can guard against damaging surges and keep surveillance systems protected and operating smoothly.

Market Opportunities
The Honeywell HDSP1 surge protector is the most dependable and cost efficient method to ensure video surveillance systems operate without interruption or damage caused by voltage spikes. Complete integrated network protection is offered in this essential system component. Costly service calls and down time can be virtually eliminated with the easy-to-install Honeywell HDSP1 Surge Protector.

Features

  • Dependable protection for PTZ cameras, recorders and electronic surveillance equipment
  • Terminal strip connections for power and data
  • BNC connections for video
  • Single point grounding
  • Will not degrade video image
  • High-impact resistant housing
  • Three-Year Warranty
  • Lightweight (2 ounces)
  • Low-profile 3.86" H x 2.07" W x 1.4" D (9.8 cm x 5.26 cm x 3.55 cm)
Honeywell Video Power HPTV09 9 camera 6-30 Volt PTC out power distribution unit with plastic encl Honeywell / Ademco Video PS8024 Power Supply: 120VAC to 24 or 28 VAC â“ 80VA
The HPTV09 power distribution unit converts one low voltage power supply input to nine individually PTC protected outputs. The unit contains screw terminals and a 2.1 mm coax plug found on many DC supplies. The snap fit case is impact resistant white plastic (paintable) and has conduit and wireway openings. This convenient power distribution unit has a wide range of applications for CCTV systems that require individually protected outputs in a convenient enclosure.

Specifications
  • Input: up to 30VAC/VDC, 2.3 A max.
  • Nine electronically regulated outputs have individual PTC circuit breakers rated 250mA each. Use thermally protected power source
  • Input and output transient protection.
  • AC power LED indicator.
  • Individual LED indicators for each output indicate PTC operation.
  • Power disconnect switch.
  • Unit maintains camera synchronization.
  • Mounts with included mounting hardware.
  • Temperature range: -4ºF to 95ºF (-20ºC to 35ºC); use inside enclosure only.
  • Dimensions 6.5" (L) x 4.3" (W) x 2.0" (D).
  • Honeywell / Ademco Video PS8024 Power Supply: 120VAC to 24 or 28 VAC â“ 80VA
    Videolarm WSTMC - Test monitor cable harness (not for use with the Warrior 9) HAI 21A05-2 Serial PC Cable
    Videolarm WSTMC - Test monitor cable harness (not for use with the Warrior 9) This cable connects the built in serial port of a Lumina, Lumina Pro, Omni LT, Omni II, Omni IIe, or OmniPro II home control system to personal computers for HAI Web-Link II, HAI Windows PC Access, and other systems. Cable is 7 feet long and has a DB-9F connector.

    Specifications:

    Manufacturer: HAI
    Manufacturer Product No.: 21A05-2
    Compatibility: OmniLT, Omni II or OmniPro II
    Length: 7'
    HAI 42A00-2 GE Wireless Receiver Interface
    The Model 42A00-2 is compatible with all 319.5 MHz GE Security (a.k.a. ITI or Interlogix) and Caddx (crystal or SAW) Learn Mode 63-bit wireless transmitters. This receiver is not compatible with 80-bit wireless transmitters. The Model 42A00-2 Supervised Wireless Receiver allows up to 64 unique wireless transmitters to report information to an HAI home control system. The Model 42A00-2 Supervised Wireless Receiver adds: 16 wireless zones to an HAI Lumina, Omni LT, Omni, Omni IIe, or Omni II home control system. Up to 64 wireless zones on an HAI Lumina Pro, OmniPro, or OmniPro II home control system; however, installing two of these receivers will create 128 wireless zones for an HAI Lumina Pro, OmniPro, or OmniPro II home control system.

    Specifications:

    Dimensions: 4.5W x 6.4H x 1.2D, excluding antennas
    Nominal Current Consumption: 45mA
    Operating Temperature: 32o F - 120o F (0° C - 49° C)
    Maximum Humidity: 90% relative humidity, non-condensing
       
     
     
     

    Enter your email for a chance to WIN $100 Amex Gift Card.

    Please Enter Your Email Address

    *One entry per household please