You are here: Home > Shop Brands > Honeywell Video Surveillance & CCTV (formerly Ademco Video) > Camera Accessories > Surge Protectors
We found 40 results matching your criteria.
Sort By:
Page of 4
ALEPH AMERICA AL-CB54036 A Bullet Camera 3.6mm Fixed Lens 540TVL IR Outdoor - ALEPH AMERICA AL-CB54036 ALEPH AMERICA AL-CB54049 A Camera Bullet 4-9mm Verifocal Lens 540TVL - ALEPH AMERICA AL-CB54049
ALEPH AMERICA AL-CB54036 A Bullet Camera 3.6mm Fixed Lens 540TVL IR Outdoor - ALEPH AMERICA AL-CB54036

ALEPH AMERICA AL-CB54049 A Camera Bullet 4-9mm Verifocal Lens 540TVL - ALEPH AMERICA AL-CB54049


This high quality Color Bullet Camera is designed for PAL/NTSC system. Aleph uses Sony’s latest Super HAD CCD technology. The camera has a

Aleph America AL-CB54049 Camera Bullet 4-9mm Verifocal Lens 540TVL APPRO B7-CV7805 1/4" Sony CCD Bullet Camera 380 TVL 3.6MM - APPRO B7-CV7805
Aleph America AL-CB54049 Camera Bullet 4-9mm Verifocal Lens 540TVL

This high quality Color Bullet Camera is designed for PAL/NTSC system. Aleph uses Sony’s latest Super HAD CCD technology. The camera has a wide operation temperature range and is not subject to distortion from magnetic field. With its lightweight and compact size, this camera can be used for monitoring and surveillance.

Features:

  • 4 to 9mm Auto Iris Lens
  • 35 - High Speed IR LEDs for superior night imaging up to 150ft..
  • Integrated 20 bit digital signal processing chip.
  • Auto high speed white balance zero color rolling.
  • Digital AGC control - Provides clear image in low light conditions.
  • Auto Exposure (AE) - Auto adjustment to any light source condition.
  • Auto Gamma correction - Provides good picture quality in extreme contrast.
  • 540 TVL
  • 0 LUX (LED On) 0.5 LUX (LED Off)
  • In order to protect the camera, please avoid placing or using the camera under direct sunlight, rain and high humidity environment.
  • Please ensure that the input voltage range is within the specifications.
Specifications:
  • Model - CB540-4-9
  • TV System - NTSC
  • Electronic Shutter - 1/60~1/120,000 sec
  • CCD T otal Pixels - 681 (H) x 512 (V)
  • Scanning System - 525 lines, 60 fields/sec.
  • Image Sensor - 1/3-inch. Sony inline CCD Image Sensor
  • SYNC System - Internal
  • Minimum Illumination - 0 LUX (LED On) 0.5 LUX (LED Off) 5600 o K
  • Lens - 4 to 9mm Auto Iris
  • Resolution - 540 TV lines
  • Signal to Noise Ratio - 52 db (AGC Off) Typical 60 db
  • White Balance - Auto high speed white balance (1 frame)
  • Auto Iris - A.E.S..
  • Video Output - 1.0Vp-p composite video @75 ohm
  • Auto Gamma Correction - 0.45
  • Gain Control - AGC
  • Operating T emperature - -10o C to 50o C / 14o F to 122o F
  • Operating Humidity - 95% RH
  • Power Supply - 12VDC
  • Power Consumption - IR On = 525 Ma IR Off = 125 Ma
APPRO B7-CV7805 1/4" Sony CCD Bullet Camera 380 TVL 3.6MM - APPRO B7-CV7805

APPRO B7-CV7819D 380TVL IR Bullet Camera Outdoor 24Led - APPRO B7-CV7819D DITEK DRP-16 battery-backup surge protector
APPRO B7-CV7819D 380TVL IR Bullet Camera Outdoor 24Led - APPRO B7-CV7819D

DTK-DRP-16 SURGE PROTECTION

DITEK’s DRP-16 battery-backup surge protector is engineered and manufactured specifically for digital video recorders. Combining a battery back up, top of the line power protection and the best digital video signal protector available, these units provide unequaled peace of mind for both installers and owners. The DRP can be mounted in a 19” rack or left free standing.

  • Integrated Battery Back-up provides up to 20 minutes of back-up power - DVR operates during power outage
  • 2.8V clamping on video signal - Best in the industry, virtually eliminates equipment damage
  • AC power, phone, network data & video protection for DVRs - Protect varied system integrations
  • Rackmountable, specify DTK-DRP-MBK mounting bracket kit - Easy installation at head end

  • Agency Approvals: UL1778, cUL
  • Service Voltage: 110 - 120VAC
  • MCOV: 130VAC
  • Continuous Current: 12 Amps
  • Max Surge Current: 58,500 Amps
  • Protection Modes: L - N, L - G, N - G
  • Suppressed Voltage Rating: 330V
  • Warranty: Limited Lifetime Warranty
  • Dimension: 17.15” x 8.00” x 3.75”
  • Weight: 14 lbs
  • Housing: Steel
  • DITEK DRP-16B battery-backup surge protector UTP IN BNC OUT DITEK DRP-16C battery-backup surge protector 16 COAX I/O 6.8V CLAMP COAXITRON
    DK-DRP16B A DIGITAL RECORDER PROTECTOR 16 CHN UTP IN BNC OUT

    DITEK’s DRP-16 battery-backup surge protector is engineered and manufactured specifically for digital video recorders. Combining a battery back up, top of the line power protection and the best digital video signal protector available, these units provide unequaled peace of mind for both installers and owners. The DRP can be mounted in a 19” rack or left free standing.

  • Integrated Battery Back-up provides up to 20 minutes of back-up power - DVR operates during power outage
  • 2.8V clamping on video signal - Best in the industry, virtually eliminates equipment damage
  • AC power, phone, network data & video protection for DVRs - Protect varied system integrations
  • Rackmountable, specify DTK-DRP-MBK mounting bracket kit - Easy installation at head end

  • Agency Approvals: UL1778, cUL
  • Service Voltage: 110 - 120VAC
  • MCOV: 130VAC
  • Continuous Current: 12 Amps
  • Max Surge Current: 58,500 Amps
  • Protection Modes: L - N, L - G, N - G
  • Suppressed Voltage Rating: 330V
  • Warranty: Limited Lifetime Warranty
  • Dimension: 17.15” x 8.00” x 3.75”
  • Weight: 14 lbs
  • Housing: Steel
  • 16 COAX I/O 6.8V CLAMP COAXITRON COMPAT DVR PROT

    EK COMPATIBLE DVR PROTECTOR

    DTK-DRP-16 SURGE PROTECTION

    DITEK’s DRP-16 battery-backup surge protector is engineered and manufactured specifically for digital video recorders. Combining a battery back up, top of the line power protection and the best digital video signal protector available, these units provide unequaled peace of mind for both installers and owners. The DRP can be mounted in a 19” rack or left free standing.

  • Integrated Battery Back-up provides up to 20 minutes of back-up power - DVR operates during power outage
  • 2.8V clamping on video signal - Best in the industry, virtually eliminates equipment damage
  • AC power, phone, network data & video protection for DVRs - Protect varied system integrations
  • Rackmountable, specify DTK-DRP-MBK mounting bracket kit - Easy installation at head end

  • Agency Approvals: UL1778, cUL
  • Service Voltage: 110 - 120VAC
  • MCOV: 130VAC
  • Continuous Current: 12 Amps
  • Max Surge Current: 58,500 Amps
  • Protection Modes: L - N, L - G, N - G
  • Suppressed Voltage Rating: 330V
  • Warranty: Limited Lifetime Warranty
  • Dimension: 17.15” x 8.00” x 3.75”
  • Weight: 14 lbs
  • Housing: Steel
  • Ditek DTK-DRP-MBK Mounting Bracket Kit for DTK-DRP Series GE 60733  3 V Button Top Lithium Battery, 6/Pk
    Ditek DTK-DRP-MBK Mounting Bracket Kit for DTK-DRP Series For use with hi-tech hand-held wireless touchpad.
    Honeywell / Ademco Video ASP16RMK Rack Mount Kit for ASP16 Honeywell Video HCSP1 - Surge Protector for Video and Power
    Honeywell / Ademco Video ASP16RMK Rack Mount Kit for ASP16 The Honeywell HCSP1 Surge Protector provides superior protection agains voltage spikes that can disable and permanently damage video equipment, including fixed cameras and recorders, causing loss of important data. Designed primarily for use with Honeywell surveillance systems, the HCSP1 Surge Protector is a necessary component to any fixed camera system providing continuous critical data.

    Power surges are sudden increases in the voltage that powers your security system. These are common occurrences that normally go unnoticed, lasting only a fraction of a second. Yet, the adverse effects can decrease the life of electronic equipment, cause irreversible damage and cause interruption of service. While lightning is the most obvious and causes the most damage, the utility company is constantly generating irregular current resulting from overburdened power grids causing rolling surges as power stations adjust to regulate voltage. Something as simple as turning on an air conditioner can cause a surge in voltage. Honeywell’s HCSP1 can guard against damaging surges and keep surveillance systems protected and operating smoothly.

    Market Opportunities
    The Honeywell HCSP1 surge protector is the most dependable and cost efficient method to ensure video surveillance systems operate without interruption or damage caused by voltage spikes. Complete integrated network protection is offered in this essential system component. Costly service calls and down time can be virtually eliminated with the easy-to-install Honeywell HCSP1 Surge Protector.

    Features

    • Dependable protection for fixed cameras, recorders and electronic surveillance equipment
    • Terminal strip connections for power
    • BNC connections for video
    • Single point grounding
    • Does not degrade video image
    • High-impact resistant housing
    • Three-Year Warranty
    • Lightweight (2 ounces)
    • Low-profile 3.86" H x 2.07" W x 1.4" D (9.8 cm x 5.26 cm x 3.55 cm
       
     
     
     

    Enter your email for a chance to WIN $100 Amex Gift Card.

    Please Enter Your Email Address

    *One entry per household please