You are here: Home > Shop Brands > IEI International Electronics Inc. > Qualified PC Modems
We found 5 results matching your criteria.
Sort By:
Page of 1
IEI IE-SSMODEM Modem Use With Secured Series Hub Plus HAI 32A30-1 Touchscreen Hub with Video Enclosure
IEI modem for Hub/Mini Max II controllers


UPC:783950305516

The Touchscreen Hub provides battery backed power for multiple touchscreens, cameras and the Video Encoder. It has convenient connections and power terminals for a neat installation. There are inputs for six individual cameras, which can be selected by the touchscreens for viewing. Six individual outputs allow the cameras to also be viewed on monitors, TV sets, video recorders, etc. HAI designed the Hub to eliminate the unsightly and unreliable "wall wart" transformers, power strips, "Y" connectors, external power supplies, battery back up units and complex wiring normally associated with camera and touchscreen installations. In addition to simplifying the installation, the power supply has low voltage cut out and automatically sequences the start up of touchscreens for long term reliability and zero maintenance. The batteries are recharged automatically.

Specifications:

HAI Product No.: 32A30-1
Dimensions: 13 1/4" W x 13 1/4" H x 4 1/2" D
Power Pack: Output: 19V DC, 3.79 Amps, max. 72 W; input: 120V AC, 1.8 Amps, 60Hz
Maximum Power: 72 watts
Batteries: sealed, rechargeable, 12 volts, 4-8 amp-hours each
Low Voltage Cut Out: 10V DC
Main Fuse: 5A Polyfuse
Battery Fuses: 5A Polyfuse
Camera Power: Nominal voltage: 12V DC; maximum current: 1.5A
Touchscreen Connections: 8 cat. 5; 8 4-conductor
Operating Temperature: 32 F to 120 F (0 C to 49 C)
Relative Humidity: 10-85%, non-condensing
HAI 32A30-2 Touchscreen Hub with Video Mounting Plate for Stuctured Wiring Enclosures HAI 32A30-3 Touchscreen Hub with No Video Encoder in Enclosure
The Touchscreen Hub supports up to eight OmniTouch touchscreens, with or without video. It is required for OmniTouch with Video. The Hub provides battery backed power for multiple touchscreens, cameras and the Video Encoder. It has convenient connections and power terminals for a neat installation. There are inputs for six individual cameras, which can be selected by the touchscreens for viewing. Six individual outputs allow the cameras to also be viewed on monitors, TV sets, video recorders, etc.

Specifications:

Manufacturer: HAI
Manufacturer Product No.: 32A30-2
Dimensions: 13" x 9" x 1 3/4"
Power Pack: Output: 19V DC, 3.79 Amps, max. 72 W; input: 120V AC, 1.8 Amps, 60Hz
Maximum Power: 72 watts
Batteries: sealed, rechargeable, 12 volts, 4-8 amp-hours each
Low Voltage Cut Out: 10V DC
Main Fuse: 5A Polyfuse
Battery Fuses: 5A Polyfuse
Camera Power: Nominal voltage: 12V DC; maximum current: 1.5A
Touchscreen Connections: 8 cat. 5; 8 4-conductor
Operating Temperature: 32 F to 120 F (0 C to 49 C)
Relative Humidity: 10-85%, non-condensing
The Touchscreen Hub is available in an HAI enclosure (same as used on Omni IIe and OmniPro II) or on the Universal Mounting Plate for installation in Structured Wiring enclosures. It is supplied with a switching power pack and uses two standard sealed, rechargeable security batteries (not supplied). The Touchscreen Hub supports up to eight OmniTouch 5.7, OmniTouch, or OmniTouch with Video touchscreens. A video encoder for the Touchscreen Hub is no longer available. If you wish to view video on an HAI Touchscreen, your options are as follows:

You must use one of HAI's IP-based Touchscreens, such as an OmniTouch 5.7e. You may use IP Cameras that provide jpg or mjpg output or Analog Cameras that are connected to an HAI Camera Server.

The Touchscreen Hub provides battery backed power for multiple touchscreens, cameras and the Video Encoder. It has convenient connections and power terminals for a neat installation. There are inputs for six individual cameras, which can be selected by the touchscreens for viewing. Six individual outputs allow the cameras to also be viewed on monitors, TV sets, video recorders, etc. HAI designed the Hub to eliminate the unsightly and unreliable "wall wart" transformers, power strips, "Y" connectors, external power supplies, battery back up units and complex wiring normally associated with camera and Touchscreen installations. In addition to simplifying the installation, the power supply has low voltage cut out and automatically sequences the start up of Touchscreens for long term reliability and zero maintenance. The batteries are recharged automatically.
HAI 32A31-2 Touchscreen Hub Only (No Enclosure)
The Touchscreen Hub is available in an HAI enclosure (same as used on Omni IIe and OmniPro II) or on the Universal Mounting Plate for installation in Structured Wiring enclosures. It is supplied with a switching power pack and uses two standard sealed, rechargeable security batteries (not supplied).

The Touchscreen Hub supports up to eight OmniTouch 5.7, OmniTouch, or OmniTouch with Video touchscreens. A video encoder for the Touchscreen Hub is no longer available. If you wish to view video on an HAI Touchscreen, your options are as follows:

You must use one of HAI's IP-based Touchscreens, such as an OmniTouch 5.7e.

You may use IP Cameras that provide jpg or mjpg output or Analog Cameras that are connected to an HAI Camera Server.
   
 
 
 

Enter your email for a chance to WIN $100 Amex Gift Card.

Please Enter Your Email Address

*One entry per household please