You are here: Home > Shop Brands > IEI International Electronics Inc. > Tampered Power Supplies
We found 16 results matching your criteria.
Sort By:
Page of 2
IEI IE-PWRTMPR12 12VDC Power Supply And Tamper IEI IE-PWRTMPR1P PWRTMPR12P With Enclosure And Transformer
Filtered and regulated 12VDC, 1.2 amp with tamper module to protect against bypass due to circuit shorting. Switchable AC/DC with built-in surge suppression for lock hardware, auto resetting poly fuses.

12VDC, 1.2 amp supply board only Requires 16.5 VAC transformer


UPC:783950911007

Filtered and regulated 12VDC, 1.2 amp with tamper module to protect against bypass due to circuit shorting. Switchable AC/DC with built-in surge suppression for lock hardware, auto resetting poly fuses.

12VDC, 1.2 amp supply in cabinet with transformer


UPC:783950912004

Edwards Signals ED-1505E5 Door Holder 12 Volt AC Edwards Signals ED-1508AQN5 Door Holder Surface Mount 24V AC/DC 120 V AC
Edwards Signals ED-1505E5 Door Holder 12 Volt AC


The 1505 Series electromagnetic door holder is a high quality device for use with single doors. The electromagnet assembly is designed for flush wall mounting.The electromagnet is designed to be flush wall mounted inside a standard single gang outlet box (not supplied). Field wiring connections are made to the electromagnet inside the electrical box. The catch plate assembly may be mounted to the door either by through-bolting or by using the concealed surface mounting plates.Designed to be used on self-closing, swinging doors to automatically isolate an area when activated by fire alarm, smoke detection or sprinkler systems. Can also be operated by manual control ? wherever the instant closing of doors is necessitated for safety or for convenience. Hospitals ? for stairwell doors, room doors, long corridors, schools ? exit door (closes all doors at once by pushbutton control); offices (instant privacy by pushing a button on your desk), nursing homes and public buildings.The 1505 Series door holder is an auxiliary device designed for wall mount applications that require holding single doors.

Edwards Signals ED-1508AQN5 Door Holder Surface Mount 24V AC/DC 120 V AC


The 1508 Series electromagnetic door holder is a high quality device for use with single doors. The electromagnet assembly is designed for surface wall mounting.The electromagnet is designed to be surface wall mounted inside a standard single gang outlet box (supplied). Field wiring connections are made to the electromagnet inside the electrical box. The catch plate assembly may be mounted to the door either by through-bolting or by using the concealed surface mounting plates.Designed to be used on self-closing, swinging doors to automatically isolate an area when activated by fire alarm, smoke detection or sprinkler systems. Can also be operated by manual control ? wherever the instant closing of doors is necessitated for safety or for convenience. Hospitals ? for stairwell doors, room doors, long corridors, schools ? exit door (closes all doors at once by pushbutton control); offices (instant privacy by pushing a button on your desk), nursing homes and public buildings.The 1508 Series door holder is an auxiliary device designed for wall mount applications that require holding single doors.

Edwards Signals ED-1509AQN5 Flush Wall Mount Door Holder 24V To 120V Edwards Signals ED-C212 Chime Kit 2-Entrances
Edwards Signals ED-1509AQN5 Flush Wall Mount Door Holder 24V To 120V


The 1509 Series electromagnetic door holder is a low profile, high quality device for use with single doors. The electromagnet assembly is designed for flush wall mounting.The electromagnet is designed to be flush wall mounted inside a standard single gang outlet box (not supplied). Field wiring connections are made to the electromagnet inside the electrical box. The catch plate assembly may be mounted to the door either by through-bolting or by using the concealed surface mounting plates.Designed to be used on self-closing, swinging doors to automatically isolate an area when activated by fire alarm, smoke detection or sprinkler systems. Can also be operated by manual control ? wherever the instant closing of doors is necessitated for safety or for convenience. Hospitals ? for stairwell doors, room doors, long corridors, schools ? exit door (closes all doors at once by pushbutton control); offices (instant privacy by pushing a button on your desk), nursing homes and public buildings.The 1509 Series door holder is an auxiliary device designed for wall mount applications that require holding single doors.

Edwards Signals ED-C212 Chime Kit 2-Entrances


Edwards Builders Chime Kits consist of an Edwards two entrance chime, a16V transformer, and two pushbuttons (option of either illuminated or non-illuminated).
For use in new or existing single or two entrance homes, apartments, condominiums, and offices.

Edwards Signals ED-C212W Chime Kit 2-Entrances/White Edwards Signals ED-CS25955 Door Holder F/1508N5
Edwards Signals ED-C212W Chime Kit 2-Entrances/White

Edwards Builders Chime Kits consist of an Edwards two entrance chime, a16V transformer, and two pushbuttons (option of either illuminated or non-illuminated).
For use in new or existing single or two entrance homes, apartments, condominiums, and offices.

Edwards Signals ED-CS25955 Door Holder F/1508n5


The 1502 Series electromagnetic door holder is a high quality device for use with double doors. The electromagnet assembly is designed for floor mounting and operates on 24V AC/DC or 120V AC. The electromagnet is designed to be floor mounted using the supplied floor mounting plate. Field wiring connections are made to the wiring inside the electromagnet. The catch plate assembly may be mounted to the doors either by through-bolting or by using the concealed surface mounting plates. Designed to be used on self-closing, swinging doors to automatically isolate an area when activated by fire alarm, smoke detection or sprinkler systems. Can also be operated by manual control ? wherever the instant closing of doors is necessitated for safety or for convenience. Hospitals ? for stairwell doors, room doors, long corridors, schools ? exit door (closes all doors at once by pushbutton control); offices (instant privacy by pushing a button on your desk), nursing homes and public buildings. The 1502 Series door holder is an auxiliary device designed for applications that require holding double doors.

Edwards Signals ED-EG1C Signaling Chime 24Vdc In White Edwards Signals ED-EG1CVM Chime Strobe Hi To Low Adjustable White
Edwards Signals ED-EG1C Signaling Chime 24Vdc In White


The Genesis line of signals are the smallest, most compact audible-visual signaling devices in the world. Genesis chimes and chime strobes blend with any decor and feature textured housings in neutral white or traditional fire alarm red. Genesis strobes do not require bulky specular reflectors. Instead, an exclusive mask-and-cavity design channels and conditions light to produce a highly controllable distribution pattern. Intensive development efforts employing this new technology have given rise to a new benchmark in strobe performance--FullLight technology. This technology produces a smooth light distribution pattern without the spikes and voids characteristic of specular reflectors. This ensures the entire coverage area receives consistent illumination from the strobe flash. Genesis strobes are self-synchronizing, but when installed with an optional synchronization modules, strobe flashes from devices on the same circuit synchronize to within 10 milliseconds of each other indefinitely. Chime/Strobes feature 15, 30 , 75 or 110 candela output, selectable with a conveniently-located switch on the bottom of the device. Settings are clearly visible even after installation. Genesis chimes produce a pleasing mellow tone. When steady (non-stroked) voltage is applied, the chime automatically pulses at 60 strokes per minute, or may be field-configured for temporal output. When installed with an EG1M Signal Master Module, the chime may also be field-configured for coded operation, which enables the chime output to match the rate that voltage is applied to the circuit. The chime's 79 dBA (peak) output level makes this device suitable for many private mode applications. Chimes may be set for low dB output with a jumper cut that reduces sound output by about 5 dB.

Edwards Signals ED-EG1CVM Chime Strobe Hi To Low Adjustable White


The Genesis line of signals are the smallest, most compact audible-visual signaling devices in the world. Genesis chimes and chime strobes blend with any decor and feature textured housings in neutral white or traditional fire alarm red. Genesis strobes do not require bulky specular reflectors. Instead, an exclusive mask-and-cavity design channels and conditions light to produce a highly controllable distribution pattern. Intensive development efforts employing this new technology have given rise to a new benchmark in strobe performance--FullLight technology. This technology produces a smooth light distribution pattern without the spikes and voids characteristic of specular reflectors. This ensures the entire coverage area receives consistent illumination from the strobe flash. Genesis strobes are self-synchronizing, but when installed with an optional synchronization modules, strobe flashes from devices on the same circuit synchronize to within 10 milliseconds of each other indefinitely. Chime/Strobes feature 15, 30 , 75 or 110 candela output, selectable with a conveniently-located switch on the bottom of the device. Settings are clearly visible even after installation. Genesis chimes produce a pleasing mellow tone. When steady (non-stroked) voltage is applied, the chime automatically pulses at 60 strokes per minute, or may be field-configured for temporal output. When installed with an EG1M Signal Master Module, the chime may also be field-configured for coded operation, which enables the chime output to match the rate that voltage is applied to the circuit. The chime's 79 dBA (peak) output level makes this device suitable for many private mode applications. Chimes may be set for low dB output with a jumper cut that reduces sound output by about 5 dB.

Edwards Signals ED-EG1FCVM Chime Strobe Hi Low White With Fire Edwards Signals ED-EG1RCVM Chime Strobe Red Adjustable
Edwards Signals ED-EG1FCVM Chime Strobe Hi Low White With Fire


The Genesis line of signals are the smallest, most compact audible-visual signaling devices in the world. Genesis chimes and chime strobes blend with any decor and feature textured housings in neutral white or traditional fire alarm red. Genesis strobes do not require bulky specular reflectors. Instead, an exclusive mask-and-cavity design channels and conditions light to produce a highly controllable distribution pattern. Intensive development efforts employing this new technology have given rise to a new benchmark in strobe performance--FullLight technology. This technology produces a smooth light distribution pattern without the spikes and voids characteristic of specular reflectors. This ensures the entire coverage area receives consistent illumination from the strobe flash. Genesis strobes are self-synchronizing, but when installed with an optional synchronization modules, strobe flashes from devices on the same circuit synchronize to within 10 milliseconds of each other indefinitely. Chime/Strobes feature 15, 30 , 75 or 110 candela output, selectable with a conveniently-located switch on the bottom of the device. Settings are clearly visible even after installation. Genesis chimes produce a pleasing mellow tone. When steady (non-stroked) voltage is applied, the chime automatically pulses at 60 strokes per minute, or may be field-configured for temporal output. When installed with an EG1M Signal Master Module, the chime may also be field-configured for coded operation, which enables the chime output to match the rate that voltage is applied to the circuit. The chime's 79 dBA (peak) output level makes this device suitable for many private mode applications. Chimes may be set for low dB output with a jumper cut that reduces sound output by about 5 dB.

Edwards Signals ED-EG1RCVM Chime Strobe Red Adjustable


The Genesis line of signals are the smallest, most compact audible and visible emergency signaling devices in the world. About the size of a deck of playing cards, these devices are designed to blend with any building environment. Edwards Genesis horn/strobes do not require bulky specular reflectors. Instead, an exclusive mask-and-cavity design, channels and conditions light to produce a highly controllable distribution pattern. Intensive development employing this new technology have given rise to a new benchmark in strobe performance--FullLight technology. The EG1-HDVM series horn/strobes offer 15 to 110 candela output,l which is selectable with a conveniently-located switch on the side of the device. The EG1-HDVMH series offers 95 to 177 candela output. The candela output setting remains clearly visible even after final installation, yet it stays locked in place to prevent unauthorized tampering. Its horn output reaches as high as 99 dB and features a unique multiple frequency tone that results in excellent wall penetration and an unmistakable warning of danger. Horns may be configured for either coded or non-coded signal circuits. They can also be set for low dB output with a jumper cut that reduces horn output by 5 dB. When installed with the Cat. No. EG1M Signal Master, strobe flashes from devices on the same circuit are synchronized to within 10 milliseconds of each other indefinitely. The Signal Master also permits independent horn control over a single pair of wires. Only one Signal Master is required per circuit. No separate backbox--simply snap it onto the back of the first signal on the circuit.

   
 
 
 

Enter your email for a chance to WIN $100 Amex Gift Card.

Please Enter Your Email Address

*One entry per household please