You are here: Home > Shop Brands > Honeywell Video Surveillance & CCTV (formerly Ademco Video) > Matrix Systems & Accessories
We found 29 results matching your criteria.
Honeywells Systems and System Accessories include IP networked video systems and analog matrix switches, as well as keyboards, controllers and GUIs that help operators manage complex video surveillance systems.
Sort By:
Page of 3
Ademco Video AD5FCK 5" Orbiter , Drop Ceiling Subassembly Ademco Video AS324TP RapidView 32 Input Matrix Switch/Control Systems - 32 Input x 4 Output, RS485 TP Control

5" Orbiter , Drop Ceiling Subassembly

RapidView 32 Input Matrix Switch/Control Systems - 32 Input x 4 Output, RS485 TP Control

The ADEMCO Video RapidView Series offers a variety of video controllers and matrix switch/control systems to fit small to mid-range video applications. ADEMCO Video RapidView series video control systems offer features usually found only in larger systems.

  • Up to 32 Video inputs by 8 monitor outputs
  • Up the coax or twisted pair operation (model dependent)
  • Simple system setup menus
  • Alarm processing
  • Requires ADEMCO Video RapidView Keyboard. DISCONTINUED; PER VENDOR:CALL APLLICATIONS DEPT:AT:1-800-796-2288-OPTION 4
Ademco Video ASKT162 RapidView Mini Matrix Switch/Control System Ademco Video AVBD9FD9F6 VideoBloX Lite Cable - 9-Pin Serial Cable with Female Ends, Straight Through (Pin-to-Pin) Connection - 6'

RapidView Mini Matrix Switch/Control System

The ADEMCO Video RapidView Mini Matrix Switch/Control System series offers a powerful, yet easy to use integrated solution for matrix switching and control.

ASKT162: 16 input x 2 output keyboard

  • Cost effective, switcher controller w/ integral keyboard
  • 8 video input x 2 video output and 16 video input x 2 video output systems available
  • Up-the-coax and RS485 twisted pair
  • Variable speed touch-stick control of domes
  • Simple system setup menus
  • Alarm processing

VideoBloX Lite Cable - 9-Pin Serial Cable with Female Ends, Straight Through (Pin-to-Pin) Connection - 6'

Female-to-female connections are used for PC to VideoBloX CPU RS232 connections. For example, configuration PC to VideoBloX CPU (RS232 slave port) or third party PC to AUX Port.

Honeywell / Ademco Video AVBPIT232 Protocol Interface Translator (PIT) Honeywell / Ademco Video AVBPITMTNG Stainless Steel Faceplate for PIT or I2C

Protocol Interface Translator (PIT)

ADEMCO Video offers the technology for a truly integrated system, and the PIT is the versatile device providing this capability. It lets you choose the equipment that is appropriate for your installation without restriction. As well as providing control for all ADEMCO Video products, high-speed domes, VCRs and multiplexers, the PIT also converts VideoBloX protocol to that of other manufacturers, allowing for retrofit installation to third party equipment. Simple DIP switch configuration selects a variety of protocols. A Hardware versions of the PIT is:

AVBPIT232:

Converts RS422 VideoBloX protocol to RS232 output protocol for control of other equipment such as VCRs, multiplexers and DVRs.

Stainless Steel Faceplate for PIT or I2C

Stainless steel faceplate for mounting in standard 19" rack with cutouts for mounting 5 PITs or I2C modules. Height is 6U.

Honeywell / Ademco Video AVBSVT Single Channel Video Titler Honeywell / Ademco Video Data Converter AVB232485: Communications converter - optically isolated

Single Channel Video Titler

Video Titlers add text information to the video input before it enters the matrix switch.

Data Converter
The 232-422 unit converts RS232 data to RS422 data and additionally provides isolation between the communication lines. This allows for extending RS232 links and conversion of the signals as required. Changeover switches can configure the RS422 as a master or slave port, while the RS232 may be switched to allow direct connection to a PC or to the RS232 port of VideoBloX products.
Honeywell / Ademco Video HVBI2C16O Output Module â“ providing 16 FET outputs Honeywell HEGS5000 - PTZ Controller

Alarm Output Expansion Module - Providing 16 FET Outputs

I2C Control Output Module
The Output module uses power FET devices and provides the capability of switching up to 16 DC low-power devices such as LEDs. Connection of an external power supply enables switching of heavier loads.

Alarm Input/Output Expander Modules

VideoBloX monitors alarm inputs and can control outputs for use in a variety of security applications. Alarm inputs are used to trigger the powerful Sequence Engine providing application specific functions and control outputs may be connected to a variety of devices to be controlled by the sequence engine. The standard VideoBloX is provided with 32 alarm inputs and four control outputs on the alarm terminal panel, connected to the CPU by a simple ribbon cable connector. This capacity can be increased using I2C modules. These are named after a communications standard that is used in many similar applications. I2C modules may be remotely installed at distances up to 4,000 feet, using Protocol Interface Translators (PITs) as alarm concentrators. This capability allows for flexibility in design, resulting in cost savings by reducing installation wiring and labor.

Features

  • Manufactured from stainless steel
  • May be remotely located from the VideoBloX chassis
  • Removable terminal blocks
  • Expands system capacity: 256 alarm inputs and 256 control outputs
The HEGS5000 controller is designed to provide simple operation of the Honeywell HD6 series of PTZ domes using the Honeywell Diamond Protocol. Up to 256 HD6 domes can be controlled by the HEGS5000. All functions of the individual units are supported remotely and intelligently.

The HEGS5000 controller includes the following features:

  • Remote Control of up to 256 Honeywell HD6 PTZ domes
  • LCD Display
  • Separate logins for Operators and Supervisors
  • Honeywell HEGS5001 - PTZ Dome, VCR and MUX Telemetry Controller Honeywell Video HEGS5300 - Full-function MAX-1000 keyboard w/ 3D joystick & generic overlay. Includes 12V dc power supply.
    HEGS5001 PTZ Dome, VCR & MUX Telemetry Controller

    The HEGS5001 controller is designed to provide simple operation of the Honeywell HD6 series of PTZ domes, KR4-series VCRs and AX-, HX- & KX-series multiplexers. Up to 16 multiplexers, 16 VCRs and 256 domes can be controlled via the HEGS5001s two serial ports. All functions of the individual units are supported remotely and intelligently.

    The HEGS5001 controller includes the following features:

  • Integrated control of Domes, VCRs, and Multiplexers.
  • Control of up to 256 Honeywell HD6 PTZ domes
  • Remote control of up to 16 Honeywell KR4XXXXX Series VCRs.
  • Remote control of up to 16 Honeywell AXCD or AXMD series, HXCT or HXMT series, KX16XXCX series multiplexers.
  • LCD Display
  • Separate logins for Operators and Supervisors
  • HEGS5300 - Full-function MAX-1000 keyboard w/ 3D joystick & generic overlay. Includes 12V dc power supply.

    The HEGS5300 is a fully programmable, 101-key keyboard with three-dimensional joystick for control of the MAX-1000 and minMAX systems. A power supply is not included.

    Features

  • 101 fully programmable keys
  • Three-dimensional, rate-proportional joystick
  • 1-99 keyboard ID
  • RS-232 connection to MAX-1000
  • Custom overlays
  • LCD display for operation data

    REPLACEMENT PART FOR UL-KEGS5300,KT

  •    
     
     
     

    Enter your email for a chance to WIN $100 Amex Gift Card.

    Please Enter Your Email Address

    *One entry per household please