|
|
|
|
|
|
|
|
|
ARM ELECTRONICS DPROCAM Professional Dummy Camera With Lens - ARM ELECTRONICS DPROCAM
The ARM Electronics DPROCAM is an imitation camera designed to resemble a genuine 'C420' series professional box camera with attached lens. It can therefore be used as a cost saving measure to fill in a gap in an array of real working cameras. It can also be used on its own in an area where the simple sight of a camera is enough to deter trespassers.
|
The ISM-BLA1-CC color camera modules attach to the Blue Line detec-tors. These camera modules, available in either NTSC or PAL formats, are small, easy-to-mount, and attractive. Set the camera to run continuously, or to run for either 15 sec or 90 sec when activated by the detector alarm. The ISM-BLA1-CC-N camera module provides an NTSC video signal of 512 (H) x 492 (V) pixels with electronic shutter speeds from 1/60 sec to 1/100000 sec. The ISM-BLA1-CC-P camera module provides a PAL video signal of 512 (H) x 582 (V) effective pixels with electronic shutter speeds from 1/50 sec to 1/100000 sec. Features Color charge-coupled device (CCD) camera with 3 lx light sensitivityNTSC or PAL video format330 lines of horizontal resolutionThe camera may be left on or controlled by the detector alarmSelectable (Form A or Form B) alarm relay outputsIncludes video cable with BNC connectorUSE INSTEAD OF DS-ISMBLA1CC
|
|
|
|
|
|
|
|
|
|
|
|
|
D102 - Key only for D101 Lock (Key #1358)
|
System transformer rated at 16.5 VAC, 40 VA.
|
|
|
|
|
|
|
|
|
|
|
|
|
DS151i Request-to-exit PIR Detector Black enclosure. For use in request-to-exit (REX) applications. Provides 2.4 m x 3 m (8 ft x 10 ft) coverage. The DS151i Request-to-Exit Sensors have a built-in adjustable timer, selectable Fail Safe/Fail Secure settings, and internal vertical pointability with an 8 ft. x 10 ft. (2.5 m x 3 m) wrap-around coverage pattern. Black. Features Single or double door useWall or ceiling mountableInternal vertical pointabilityWrap-around coverage patternSelectable relay trigger modeSelectable fail safe/fail secure modes
|
Operates at 10.525 GHz. Provides first step processing, 360° x 21 m (70 ft) diameter coverage, and up to 7.6 m (25 ft) mounting height. The DS9370 Series TriTech detectors can be used on ceilings as high as 25 ft (7.6 m). The combination of passive-infrared (PIR) detection, microwave detection, and advanced signal processing techniques allows TriTech detectors to rapidly respond to human targets without triggering false alarms from other sources. With three separate PIR sections that are fully adjustable, coverage can be customized for specific areas at all mounting heights. Features Up to 25 ft (7.6 m) mounting heightFully-adjustable optical arrays for coverage customizationHinged chassis and base plate for easy installation360° x 70 ft (20 m) diameter pattern
|
|
|
|
|
|
|
|
|
|
|
|
|
Provides black enclosure, up to 7.6 m (25 ft) mounting height, 360° x 20 m (70 ft) diameter pattern, and movable mirrors. The DS9371 Series TriTech detector can be used on ceilings as high as 25 ft (7.6 m). The combination of passive-infrared (PIR) detection, microwave detection, and advanced signal processing techniques allows TriTech detectors to rapidly respond to human targets without triggering false alarms from other sources. With three separate fully-adjustable PIR sections, coverage can be customized for specific areas at all mounting heights. Features Up to 25 ft (7.6 m) mounting heightFully-adjustable optical arrays for coverage customizationHinged chassis and base plate for easy installationHigh-efficiency LED and light-pipe system for easy walk testingFirst Step Processing (FSP)Microwave adaptive processing
|
The DS9432 8 Input Multiplex Module allows addressing of up to 8 input loops of conventional contacts to the multiplex bus of a panel. Requires D8125MUX Multiplex Bus Interface. Supplied with fire EOL resistors.
|
|
|
|
|
|
|
|
|
|
|
|
The Professional Series PIR Detector ISC-PPR1-W16 is exceptionally suited for commercial indoor applications. The self-locking two-piece enclosure, built-in bubble level, flexible mounting height, and three optional mounting brackets simplify installation and reduce service time. Sensor data fusion technology ensures that the detector sends alarm conditions based on precise information. Tri-focus optics technology eliminates coverage gaps and responds efficiently to intruders. The powerful combination of unique features in the Professional Series delivers superior catch performance and virtually eliminates false alarms.
Features: 16 m x 21 m (50 ft x 70 ft) coverage, field selectable to 7.5 m x 10 m (25 ft x 33 ft) Sensor data fusion technology 2.1 m to 3 m (7 ft to 10 ft) mounting height, no adjustments required Tri-focus optics technology Active white light suppression Dynamic temperature compensation Remote walk test Alarm memory Draft and insect immunity
Specifications Color: White Dimensions: 127 mm x 69 mm x 58 mm (5 in. x 2.75 in. x 2.25 in.) Material: High-impact ABS plastic Relative Humidity: 0 to 95%, non-condensing Temperature (Operating and Storage): -29°C to +55°C (-20°F to +130°F) For UL Certificated installations, 0°C to +49°C (+32°F to +120°F) Environmental Class II IP Rating: IP 41, IK02 (EN60529, EN50102) Alarm Indicator: Blue LED Zones: 89 Outputs: Relay Solid state relay, normally-closed (NC) contacts, power supervised. 3 W, 125 mA, 25 VDC, resistance < 10 ohm Tamper: Normally-closed (NC) contacts (with cover on) rated at 25 VDC, 125 mA maximum. Connect tamper circuit to 24-hour protection circuit. Power Requirements:
- Voltage (Operating): 9 VDC to 15 VDC
- Current (Maximum): < 15 mA
- Current (Standby): < 10 mA at 12 VDC
|
Coil Impedance 8 Ohms Rated 8 W nominal, 15 W peak Metal tilt mounting base Dimensions : 6" D, 5.25" Dia (15.2 cm D, 13.3 cm Dia) Constructed of rugged, impact resistant plastic. Uses heavy-duty high quality magnets and diaphragms; weather resistant for indoor or outdoor use.
|
|
|
|
|
|
|
|
|
|
|
DS939 Panoramic Detector Provides a 21 m (70 ft) panoramic coverage pattern and can be used on ceilings as high as 7.6 m (25 ft). The ceiling mount DS939 PIR Detector provides a 21 m (70 ft) pano-ramic coverage pattern and can be used on ceilings as high as 7.6 m (25 ft). With three separate PIR sections that are fully adjustable, the DS939 provides coverage integrity at all mounting heights, plus the ability to customize the coverage for specific areas. The DS939 uses several patented processing techniques to provide excellent catch performance with freedom from false alarms. Features Up to 7.6 m (25 ft) mounting heightFully adjustable optics for coverage integrity and customizationHinged chassis and base plate for easy installationHigh efficiency LED and light pipe system for easy walk testingFirst Step Processing (FSP)360° x 21 m (70 ft) diameter pattern
|
|
|
