You are here: Home > Shop Brands > GE Kalatel > Discreet Cameras > PIR Color Cameras
We found 172 results matching your criteria.
Sort By:
Page of 15
Wheelock DB1HPULA024D1D2NNNR - Multitone, 100dBA, 24 VDC, Red finish Wheelock DB1PULA024D1D2NNNR - Multitone, 93dBA, 24 VDC, Red finish
Description:
This range of light weight, flameproof horns has been
designed with a high weatherproof rating to cope with the
harsh environmental conditions found offshore and onshore
in the oil, gas and petrochemical industries.
New electronic circuitry allows the DB1P and DB1HP to be
switched between two selectable tones by either reversing
the supply polarity, or connecting a second voltage supply.
The higher output DB1 HP is particularly suitable for noisy
environments.

Features*:
UL Listed Class I, Div 1. Groups C & D
Class I, Zone 1
ATEX approved
NEMA 4x, IP66
Certified temperature 13F to +158F (25C
to +70C)
NFPA 72 compliant
4 wire diode monitored connection for operation
in supervisory mode
Up to 103 dBA output @ 10 feet (DB1 HP)
Marine grade alloy
Up to 27 output tones, user selectable
12V, 24V & 48 VDC, 110 VAC
Tones can be selected remotely
Any two tones may be switched via the external
voltage supply
*Depends on version

Specification
Certification:
UL Listing: Class I, Div 1, Groups C & D.
Listing No. E187688.
ATEX approved: EExd, IIB T3
Cert No. Baseefa 02ETEX0207 for DB(1P)
Cert No. Baseefa 02ETEX0209 for DBH(P)
Material:
LM25 corrosion resistant alloy with stainless steel cover
screws.
ABS flare.
Finish:
Epoxy paint finish as standard or to customer's specification.
Max Sound Levels:
DB1(P)=933dB(A) (863dB(A) for 12V DB1).
DB1H(P)=100 3dB(A) @ 10 feet
Note: Sound level is dependent upon the tone selection.
Weight:
DB1P 7.7lb./3.5 Kg approx.
DB1HP 12.3lb./5.6 Kg approx.
Certified Temperature:
13F to +158F (25C to +70C)
Ingress Protection:
NEMA 4x, IP66.
Tone Selection:
27 User Selectable Tones
Labels:
Duty and tag labels optional.
Entries:
Up to 3 x 1/2" or 3/4" NPT
Terminals:
up to 8 x 12AWG

 

Current Consumption

 

DB1(P)

DB1H(P)

12V

125mA

900mA

24V

250mA

700mA

48V

250mA

110V

60mA

200mA

 

Description:
This range of light weight, flameproof horns has been
designed with a high weatherproof rating to cope with the
harsh environmental conditions found offshore and onshore
in the oil, gas and petrochemical industries.
New electronic circuitry allows the DB1P and DB1HP to be
switched between two selectable tones by either reversing
the supply polarity, or connecting a second voltage supply.
The higher output DB1 HP is particularly suitable for noisy
environments.

Features*:
UL Listed Class I, Div 1. Groups C & D
Class I, Zone 1
ATEX approved
NEMA 4x, IP66
Certified temperature 13F to +158F (25C
to +70C)
NFPA 72 compliant
4 wire diode monitored connection for operation
in supervisory mode
Up to 103 dBA output @ 10 feet (DB1 HP)
Marine grade alloy
Up to 27 output tones, user selectable
12V, 24V & 48 VDC, 110 VAC
Tones can be selected remotely
Any two tones may be switched via the external
voltage supply
*Depends on version

Specification
Certification:
UL Listing: Class I, Div 1, Groups C & D.
Listing No. E187688.
ATEX approved: EExd, IIB T3
Cert No. Baseefa 02ETEX0207 for DB(1P)
Cert No. Baseefa 02ETEX0209 for DBH(P)
Material:
LM25 corrosion resistant alloy with stainless steel cover
screws.
ABS flare.
Finish:
Epoxy paint finish as standard or to customer's specification.
Max Sound Levels:
DB1(P)=933dB(A) (863dB(A) for 12V DB1).
DB1H(P)=100 3dB(A) @ 10 feet
Note: Sound level is dependent upon the tone selection.
Weight:
DB1P 7.7lb./3.5 Kg approx.
DB1HP 12.3lb./5.6 Kg approx.
Certified Temperature:
13F to +158F (25C to +70C)
Ingress Protection:
NEMA 4x, IP66.
Tone Selection:
27 User Selectable Tones
Labels:
Duty and tag labels optional.
Entries:
Up to 3 x 1/2" or 3/4" NPT
Terminals:
up to 8 x 12AWG

 

Current Consumption

 

DB1(P)

DB1H(P)

12V

125mA

900mA

24V

250mA

700mA

48V

250mA

110V

60mA

200mA

 

Wheelock PBUL5C4ADN7R - PUSH BUTTON,DOUBLE CHANGE OVER,CL 1 DIV 2,FIRE,RED Edwards Signals ED-100SBAN5 Strobe Rotating 120vac Amber
Description:
These manual fire alarm call points have been designed for use
in hazardous locations and harsh environmental conditions. The
GRP enclosures are suitable for use offshore or onshore, where
light weight combined with a high level of corrosion resistance is
required.
Features*:
UL Listed for USA and Canada
Hazardous locations:
Class I, Div 2, Groups A, B, C & D
Class II, Div 2, Groups F & G
Class I, Zones 2
Ordinary locations: Fire Alarm Boxes
California State Fire Marshal (CSFM) Listed
ATEX approved
CSA Certified
NEMA 4x &6, IP66 and IP67
Certified temperature 13F to +131F (25C to +55C)
Corrosion resistant GRP
Plastic break glass element available
Retained stainless steel cover screws
Optional lift flap
Key operated test facility on BG
In-line and fitted end of line resistors
Optional LED to indicate operation
* Depending on version
* NFPA 72

Specification

Certification: UL Listed for USA and Canada

  – Hazardous locations:

                    Class I, Div 2, Groups A-D. Class I, Zones 2

                    Class II, Div 2, Groups F & G.

                    Listing No: E186629

  – Ordinary locations: Fire Alarm Box

                    Listing No. S8117.

California State Fire Marshal (CSFM) Listed

CSA Certified to C22.2 (PB only), Nos. 0-M, 0.4M, 14-M,

25,30-M, 94, 142-M 1987, 157M 1987, 157-92, Enclosure

Type 4, 4A, Class 1, Groups A-D, Cert. No. 79120.

ATEX Approved: EN50014, EN50018, EN50019,

EN50028. Cert. No. BAS02ATEX2105X (BG & PB), EExed

II C T6 (switch only), EExedm IIC T4 (other versions).

Voltage: Up to 240V.

Certified temp: BGUL: –13°F to +131°F (–25°C to + 55°C); PBUL: –13°F

                               +131°F (–25°C to +55°C). PB (CSA): -58°F to +104°F

                               (-50°C to +40°C).

Ingress Protection: NEMA 4x & 6, IP66 & 67.

 

Terminals: 6 x 14 AWG standard (BGUL), 7 or 9 x 14 AWG standard.

Switch Rating (1 or 2 changeover switches fitted): Max Rating 240VAC, 3A.

Cable Entries: Up to 4 entries 1⁄2” NPT.

Weight: 2.6 lb/1.2kg (Varies with model & entries).

Material: Glass reinforced polyester.

Finish: Red epoxy painted finish as standard or to Customer’s specification.

Resistors: Various configurations available on versions up to 24V, 470R minimum.

LED A high intensity red LED can be fitted as an optional extra to

Indication: indicate operation on versions up to 24V.

Labelling: BG Glass label – reads either

(1) Fire Break glass – press here.

(2) Break glass – press here.

(3) Worded to Client’s requirements.

PB & BG Duty label – worded to Client’s requirements. Riveted on.

PB & BG Tag label – worded to Client’s requirements. Screwed on.

                       

Edwards Signals ED-100SBAN5 Strobe Rotating 120vac Amber


Edwards 100SB Series Pathfinder Rotating Beacons have powerful dual sealed beam lamps that rotate 360 degrees within a high impact polycarbonate dome. Polycarbonate domes are safer and easier to clean than glass domes and allow the transmission of more light than heavily colored glass. Polycarbonate domes are also ideal for applications such as those required in food processing plants that prohibit the use of glass. The Edwards 100SB Series also features a PVC coated base that allows for greater corrosion resistance and durability than plastic or simple stamped metal bases. Wiring is routed through the 3/4" NPT hub on the bottom of the unit. The Pathfinder is conduit mounted. Available in five lens colors: red, amber, blue, green, and clear.

Edwards Signals ED-101FLEDAG Strobe 24V DC Amber Lens Flashing Edwards Signals ED-101FLEDGG Strobe 24V DC Flashing Led 24V DC Green
Edwards Signals ED-101FLEDAG Strobe 24V DC Amber Lens Flashing


The Edwards AdaptaLight Stackable Beacon is a unique audible-visual signaling device which can contain up to 5 light modules and a pulsating horn in a single ?stack.? It is for heavy duty use in locations where visibility over longer distances is required. All modules are gasketed. The base of the AdaptaLight tackable Beacon contains a pulsating horn rated at 85dB at 10 feet. The horn can be operated as a sixth independent signal or in conjunction with any one of the light modules.The steady-on modules provide a constant visual signal. They are ideal for start/stop functions, on/off process or continuous duty visual signaling applications.The flashing modules command immediate attention. They work well as a warning signal when used with the steady-on module. Applications include signaling of equipment malfunction.The strobe modules are ideal for high ambient light areas. It can effectively signal urgent status changes when used in conjunction with the ncandescent or LED light modules. The LED modules are best for applications where long life (120,000 hours) is a requirement.The AdaptaLight can be surface or 1/2" (13mm) NPT conduit pipe mounted in non-hazardous dust and weatherproof applications. For indoor applications, it may be vertically mounted with lenses facing either up or down. For weatherproof installation, the unit must be mounted vertically with lenses facing up. May also be corner mounted using the Cat. No. CBR, corner mount bracket, or wall mounted, using the Cat. No. WBR, wall mount bracket. See AdaptaBeacon Accessories.

Edwards Signals ED-101FLEDGG Strobe 24V DC Flashing Led 24V DC Green


The Edwards AdaptaLight Stackable Beacon is a unique audible-visual signaling device which can contain up to 5 light modules and a pulsating horn in a single ?stack.? It is for heavy duty use in locations where visibility over longer distances is required. All modules are gasketed. The base of the AdaptaLight tackable Beacon contains a pulsating horn rated at 85dB at 10 feet. The horn can be operated as a sixth independent signal or in conjunction with any one of the light modules.The steady-on modules provide a constant visual signal. They are ideal for start/stop functions, on/off process or continuous duty visual signaling applications.The flashing modules command immediate attention. They work well as a warning signal when used with the steady-on module. Applications include signaling of equipment malfunction.The strobe modules are ideal for high ambient light areas. It can effectively signal urgent status changes when used in conjunction with the ncandescent or LED light modules. The LED modules are best for applications where long life (120,000 hours) is a requirement.The AdaptaLight can be surface or 1/2" (13mm) NPT conduit pipe mounted in non-hazardous dust and weatherproof applications. For indoor applications, it may be vertically mounted with lenses facing either up or down. For weatherproof installation, the unit must be mounted vertically with lenses facing up. May also be corner mounted using the Cat. No. CBR, corner mount bracket, or wall mounted, using the Cat. No. WBR, wall mount bracket. See AdaptaBeacon Accessories.

Edwards Signals ED-101FLEDRG Strobe 24V DC Flashing Led 24V DC Red Edwards Signals ED-101STAE1 Flashing Strobe Light 12vdc Amber
Edwards Signals ED-101FLEDRG Strobe 24V DC Flashing Led 24V DC Red


The Edwards AdaptaLight Stackable Beacon is a unique audible-visual signaling device which can contain up to 5 light modules and a pulsating horn in a single ?stack.? It is for heavy duty use in locations where visibility over longer distances is required. All modules are gasketed. The base of the AdaptaLight tackable Beacon contains a pulsating horn rated at 85dB at 10 feet. The horn can be operated as a sixth independent signal or in conjunction with any one of the light modules.The steady-on modules provide a constant visual signal. They are ideal for start/stop functions, on/off process or continuous duty visual signaling applications.The flashing modules command immediate attention. They work well as a warning signal when used with the steady-on module. Applications include signaling of equipment malfunction.The strobe modules are ideal for high ambient light areas. It can effectively signal urgent status changes when used in conjunction with the ncandescent or LED light modules. The LED modules are best for applications where long life (120,000 hours) is a requirement.The AdaptaLight can be surface or 1/2" (13mm) NPT conduit pipe mounted in non-hazardous dust and weatherproof applications. For indoor applications, it may be vertically mounted with lenses facing either up or down. For weatherproof installation, the unit must be mounted vertically with lenses facing up. May also be corner mounted using the Cat. No. CBR, corner mount bracket, or wall mounted, using the Cat. No. WBR, wall mount bracket. See AdaptaBeacon Accessories.

Edwards Signals ED-101STAE1 Flashing Strobe Light 12vdc Amber


The Edwards AdaptaLight Stackable Beacon is a unique audible-visual signaling device which can contain up to 5 light modules and a pulsating horn in a single ?stack.? It is for heavy duty use in locations where visibility over longer distances is required. All modules are gasketed. The base of the AdaptaLight tackable Beacon contains a pulsating horn rated at 85dB at 10 feet. The horn can be operated as a sixth independent signal or in conjunction with any one of the light modules.The steady-on modules provide a constant visual signal. They are ideal for start/stop functions, on/off process or continuous duty visual signaling applications.The flashing modules command immediate attention. They work well as a warning signal when used with the steady-on module. Applications include signaling of equipment malfunction.The strobe modules are ideal for high ambient light areas. It can effectively signal urgent status changes when used in conjunction with the ncandescent or LED light modules. The LED modules are best for applications where long life (120,000 hours) is a requirement.The AdaptaLight can be surface or 1/2" (13mm) NPT conduit pipe mounted in non-hazardous dust and weatherproof applications. For indoor applications, it may be vertically mounted with lenses facing either up or down. For weatherproof installation, the unit must be mounted vertically with lenses facing up. May also be corner mounted using the Cat. No. CBR, corner mount bracket, or wall mounted, using the Cat. No. WBR, wall mount bracket. See AdaptaBeacon Accessories.

Edwards Signals ED-101STAG1 24v Dc Amber Flsh Strobe Lite Edwards Signals ED-101STBG1 24v Dc Flshing Strobe Lght Mod Blue
Edwards Signals ED-101STAG1 24v Dc Amber Flsh Strobe Lite


The Edwards AdaptaLight Stackable Beacon is a unique audible-visual signaling device which can contain up to 5 light modules and a pulsating horn in a single ?stack.? It is for heavy duty use in locations where visibility over longer distances is required. All modules are gasketed. The base of the AdaptaLight tackable Beacon contains a pulsating horn rated at 85dB at 10 feet. The horn can be operated as a sixth independent signal or in conjunction with any one of the light modules.The steady-on modules provide a constant visual signal. They are ideal for start/stop functions, on/off process or continuous duty visual signaling applications.The flashing modules command immediate attention. They work well as a warning signal when used with the steady-on module. Applications include signaling of equipment malfunction.The strobe modules are ideal for high ambient light areas. It can effectively signal urgent status changes when used in conjunction with the ncandescent or LED light modules. The LED modules are best for applications where long life (120,000 hours) is a requirement.The AdaptaLight can be surface or 1/2" (13mm) NPT conduit pipe mounted in non-hazardous dust and weatherproof applications. For indoor applications, it may be vertically mounted with lenses facing either up or down. For weatherproof installation, the unit must be mounted vertically with lenses facing up. May also be corner mounted using the Cat. No. CBR, corner mount bracket, or wall mounted, using the Cat. No. WBR, wall mount bracket. See AdaptaBeacon Accessories.

Edwards Signals ED-101STBG1 24v Dc Flshing Strobe Lght Mod Blue


The Edwards AdaptaLight Stackable Beacon is a unique audible-visual signaling device which can contain up to 5 light modules and a pulsating horn in a single ?stack.? It is for heavy duty use in locations where visibility over longer distances is required. All modules are gasketed. The base of the AdaptaLight tackable Beacon contains a pulsating horn rated at 85dB at 10 feet. The horn can be operated as a sixth independent signal or in conjunction with any one of the light modules.The steady-on modules provide a constant visual signal. They are ideal for start/stop functions, on/off process or continuous duty visual signaling applications.The flashing modules command immediate attention. They work well as a warning signal when used with the steady-on module. Applications include signaling of equipment malfunction.The strobe modules are ideal for high ambient light areas. It can effectively signal urgent status changes when used in conjunction with the ncandescent or LED light modules. The LED modules are best for applications where long life (120,000 hours) is a requirement.The AdaptaLight can be surface or 1/2" (13mm) NPT conduit pipe mounted in non-hazardous dust and weatherproof applications. For indoor applications, it may be vertically mounted with lenses facing either up or down. For weatherproof installation, the unit must be mounted vertically with lenses facing up. May also be corner mounted using the Cat. No. CBR, corner mount bracket, or wall mounted, using the Cat. No. WBR, wall mount bracket. See AdaptaBeacon Accessories.

Edwards Signals ED-102LSSTG1 Flash Strobe Liht Sorc F/Stackable Edwards Signals ED-104FLEDB5 Strobe Flashing Blue Beacon 12Vac
Edwards Signals ED-102LSSTG1 Flash Strobe Light source F/Stackable


The Edwards Triliptical Stackable Status Indicator is a unique audible-visual signaling device that can contain up to 5 light modules and a pulsating horn in a single ?stack.? All modules are gasketed.The Triliptical Stackable Status Indicator bases are available in three models. A shorter base for conduit or surface mounting or a larger base designed for use with an optional tone module assembly. The larger base is also available with an optional DeviceNet interface.The Triliptical diffusion optic lens allows viewing from close up while still projecting the light through use of a built-in projection ring.The lenses are available in six colors: red, amber/orange, yellow, blue, green, and clear. Each light source module contains a removable cover to allow for easy relamping. The light module cover features a molded-in gasket for dust tight reliability. Double optics and the triliptical design provides an increased viewing area without increasing the base diameter. The lens modules can be easily stacked together utilizing an internal retaining assembly. Two tone modules are available. A single tone module and a tone selectable tone module - one tone selectable from eight available tones. Provides up to 85 dB at 5 feet. The multi-tone module is also available with an optional DeviceNet interface that allows all eight tones to be controlled over a DeviceNet network.Surface or 3/4" (19mm) NPT conduit pipe mounting in non-hazardous dust and weatherproof applications. For indoor applications, may be vertically mounted with lenses facing up or down. For weatherproof installation, it is recommended that the unit be conduit mounted vertically with lenses facing up.DeviceNet Compatible Stackable Status IndicatorThe 102 Series Triliptical Stackable Status Indicator has been tested by ODVA's authorized independent test lab and complies with ODVA conformance test software.The Triliptical DeviceNet Stackable Beacon is a slave device. It is a general purpose status indicator designed to indicate the status of a machine or process. The unit contains a preprogrammed microcontroller which implements the Group 2 predefined Master/Slave Connection Set. This allows for one Explicit Messaging Connection and one Poll Connection. The Stackable Beacon resets automatically when DeviceNet power is applied.The DeviceNet interface is in the Triliptical DeviceNet Base, 102TBS-DN, which interfaces between the DeviceNet network and all installed stacklight modules. The unisolated physical layer contains DeviceNet required mis-wiring protection circuitry. A standard open style (unsealed) 5 pin connector is used to connect the Stackable Beacon to the DeviceNet bus. The current draw from the bus is 0.12A. The power required to drive the lamps is supplied separately from the bus power for the 120V AC (N5) version. DC power for the 24V DC (G1) version may be taken locally or from the DeviceNet Network. A standard open style 2 pin connector is used to connect 24V DC @ 1.6A or 120V AC at 0.6A to drive the 5 light sources.The DeviceNet compatible unit provides for complete light source diagnostics. Each light source: LED, strobe, halogen or incandescent is continuously monitored for operability. An inoperable or missing light source is reported on the DeviceNet network.

Edwards Signals ED-104FLEDB5 Strobe Flashing Blue Beacon 12Vac


The Edwards 104FIN Series AdaptaBeacon flashing halogen lights and 104FLED Series AdaptaBeacon flashing LED lights are designed to provide a bright visual indication utilizing special optics within a shatter resistant polycarbonate lens mounted on a polycarbonate/ABS blend base. Suitable for indoor or outdoor installation. When mounted outdoors lens should be mounted facing up. May be panel mounted using the provided locknut or conduit mounted. An integral double threaded (internal/external) mounting nipple accommodates 3/4" (19mm). Double (internal/external) threaded mounting nipple suitable for direct panel mounting or 1/2" (13 mm) conduit mounting. Often used to signal malfunctions in equipment, such as assembly line jams. Can warn personnel that they are entering a restricted area or an area of high danger. They can advise personnel in manufacturing and process areas when an operation is starting or stopping. Ideal for use where many multiple smaller flashing lights are specified.

   
 
 
 

Enter your email for a chance to WIN $100 Amex Gift Card.

Please Enter Your Email Address

*One entry per household please