212-537-6540   212-202-3763

Edwards 1505-AQN5 Electromagnetic Door Holder; 24 Volt AC/DC, 120 Volt AC, 0.015 Amp, Flush/Wall Mount

Edwards 1505-AQN5 Electromagnetic Door Holder; 24 Volt AC/DC, 120 Volt AC, 0.015 Amp, Flush/Wall Mount
In Stock

Usually leaves our warehouse the same business day.


0 [0]
Edwards 1500 Series electromagnetic door holders feature housings finished with durable baked polyester powder paint. The floor or wall section houses the electromagnet while the contact plate attaches to the door. The contact plate has a shock absorbing nylon (swivel) ball that allows the plate to adjust to any door angle. Floor units are available in single-door or double-door (back to back) versions. Wall units are available in flush or surface mounted versions. If power fails, doors are released automatically but may be opened or closed manually at any time. All units are free of moving parts, are self-contained and require no maintenance. The devices holders hold a door open while energized. When d-energized by a really controlled by the fire alarm system or other switch, the door is released to a closed position. Flush Wall Mount: 0.81 in. D x 4.5 in. H x 2.75 in.W. Short Catch Plate: 1.625 in. D x 2.38 in. H x 1.69 in. W.

Also known as

  • Edwards Signaling - 1505AQN5 - Electromagnetic Door Holder, 120VAC
  • Edwards Signaling Security Camera Mounts Electromagnetic Door Holder Flush, Wall
  • Edwards 1505-AQN5 Electromagnetic Door Holder 24 Volt AC/DC 120 Volt AC 0.015
  • Flush wall mounted - (short catch plate)
  • Low power consumption
  • 25 Lbf (111N) nominal holding force
  • Silent operations
  • Powder epoxy aluminum
  • Operating voltage: 24 VAC, 24 VDC, 120 VAC
  • Operating temperature range: 32F to 120F (0C to 49C)
  • UL, cUL, FM, MEA, CSFM
  • The 1505 series electromagnetic door holder is a high quality device for use with single doors and the electromagnet assembly is designed for flush wall mounting
  • The electromagnet is designed to be flush wall mounted inside a standard single gang outlet box (not supplied)
  • Completely silent operation
  • Adjustable, swivel contact plate
  • Field wiring connections are made to the electromagnet inside the electrical box
  • The catch plate assembly may be mounted to the door either by through-bolting or by using the concealed surface mounting plates
  • Designed to be used on self-closing, swinging doors to automatically isolate an area when activated by fire alarm, smoke detection or sprinkler systems