212-537-6540   212-202-3763
  info@securitystoreusa.com

Edwards 1509-AQN5 Electromagnetic Door Holder; 24 Volt AC/DC, 120 Volt AC, 0.015 Amp, Flush/Wall Mount

Edwards 1509-AQN5 Electromagnetic Door Holder; 24 Volt AC/DC, 120 Volt AC, 0.015 Amp, Flush/Wall Mount
EDWARDS SIGNALING
ED-1509AQN5
 
Quantity
In Stock

Usually leaves our warehouse the same business day.

Reviews:

0 [0]
GE Security Electromagnetic Door Holders are ruggedly constructed and attractively designed. The housing is finished with an aluminum color, durable baked polyester powder paint. The floor or wall section houses the electromagnet while the contact plate attaches to the door. The contact plate has a shock absorbing nylon (swivel) ball which allows the plate to adjust to any door angle. Floor units are available in single-door or double-door (back to back) versions. Wall units are available in flush or surface mounted versions.GE Security door releases should be installed wherever doors may be effectively used to confine smoke and fire, or where the release of a self-closing door from a remote location is desirable for other reasons. Fail-safe operation is an inherent feature of GE Security door holder-releases. If power fails, doors are released automatically but may be opened or closed manually at any time.

Also known as

  • Edwards Signaling Security Camera Mounts Electromagnetic Door Holder Completely
  • Edwards 1509-AQN5 Electromagnetic Door Holder 24 Volt AC/DC 120 Volt AC 0.015
  • EDWARDS GS 1509AQN5 FLUSH WALL MOUNT DOOR HOLDER 24V TO 120V
  • Completely flush wall mounted
  • Low power consumption
  • 25 Lbf (111N) nominal holding force
  • Silent operations
  • Powder epoxy aluminum
  • Operating voltage: 24 VAC, 24 VDC, 120 VAC
  • Operating temperature range: 32F to 120F (0C to 49C)
  • UL, cUL, FM, MEA, CSFM
  • The 1509 series electromagnetic door holder is a low profile, high quality device for use with single doors and the electromagnet assembly is designed for flush wall mounting
  • The electromagnet is designed to be flush wall mounted inside a standard single gang outlet box (not supplied)
  • Completely silent operation
  • Adjustable, swivel contact plate
  • Field wiring connections are made to the electromagnet inside the electrical box
  • The catch plate assembly may be mounted to the door either by through-bolting or by using the concealed surface mounting plates
  • Designed to be used on self-closing, swinging doors to automatically isolate an area when activated by fire alarm, smoke detection or sprinkler systems