Edwards Signal ED-EG4RS2 Edwards ED-EG4RS2 Wall Speaker 25 Volt Red
Custom orders usually ship in 1-2 weeks.
The Genesis line of signals are the smallest, most compact audible-visual emergency signaling devices in the world. Genesis speakers and speaker/strobes blend with any decor and feature textured housings in neutral white or traditional fire alarm red. Stobes: Genesis strobes do not require bulky specular reflectors. Instead, an exclusive mask-and-cavity design channels and conditions light to produce a highly controllable distribution pattern. Intensive development efforts employing this new technology have given rise to a new benchmark in strobe performance-FullLight technology. This technology produces a smooth light distribution pattern without the spikes and voids characteristic of specular reflectors. This ensures the entire coverage area receives consistent illumination from the strobe flash. Genesis strobes self-synchronize when installed with the EG1M Signal Master. Strobe flashes from devices on the same circuit synchronize to within 10 milliseconds of each other indefinitely. This exceeds the revised UL standards which specify this level of synchronization over only two hours. Speaker/strobes feature 15, 30, 75 or 110 candela output, selectable with a conveniently-located switch on the bottom of the device. The candela setting remains clearly visible even after final installation. All Genesis speakers include a DC blocking capacitor to allow electrical supervision of the audio distribution circuit. Models for 25V RMS or 70V RMS circuits are available. The mylar speaker with its sealed back construction provides extra durability and improved audibility. 1/4 W to 2 W operation is selectable with a conveniently-located switch on the bottom of the device. The wattage tap setting remains clearly visible even after final installation. Specifications: Genesis Speakers and Speaker-Strobes: Housing:Red or white textured UV stabilized, color impregnated engineered plastic. Exceeds 94V-0 UL flammability rating Dimensions:Height: 6.5Ã‚â€ (165 mm). Width: 5Ã‚â€ (127 mm). Depth to wall: 1Ã‚â€ (25 mm) Mounting (indoor wall mount only):Flush: North-American 4Ã‚â€ square box, 2 1/8Ã‚â€ (54 mm) deep Surface: model EG4B (white) or EG4RB (red) surface mount box Wire Connections:Screw terminals: separate polarized inputs for speaker and strobe, #18 to #12 AWG (0.75 mmÃ‚Â² to 2.5 mmÃ‚Â²) wire size Operating environment:32-120Ã‚Â° F (0-49Ã‚Â° C) ambient temperature; 0-93% relative humidity Agency Listings:UL 1971, UL 1638, UL 1480, ULC S526, ULC S541, CSFM, MEA (FM pending) (All models comply with ADA Code of Federal Regulation Chapter 28 Part 36 Final Rule.) Speakers: Input/Operating Volts: 25 VRMS or 70 VRMS. See ordering information Speaker Taps/Output: 2 W = 89 dBA; 1 W = 86 dBA; Ã‚Â½ W = 83 dBA; Ã‚Â¼ W = 80 dBA Speaker Cone: Speaker frequency response: 250 to 5,000 Hz Optimized for voice intelligibility. 4-inch (102mm) mylar cone, sealed back construction Strobes: Strobe Output Rating: UL 1971, ULC S526: selectable 15 cd, 30 cd, 75 cd, or 110 cd output UL 1971: 15 cd (fixed 15/75 cd models) UL 1638, ULCS526: 75 cd (fixed 15/75 cd models) Strobe Operating Voltage: 16 - 33 Vdc Regulated, 16-33 V Full wave rectified (UL Voltage Designations Ã‚â€œRegulated 24Ã‚â€ and Ã‚â€œ24 fwrÃ‚â€) Strobe Flash Rate: One flash per second Strobe Flash Synchronization: All strobes: one flash per second (fps) within 200 milliseconds over 30 minutes on common circuit All strobes: Synchronization source required to comply with UL 1971 synchronization standard Temporal setting (private mode only): synchronized to temporal output on the same circuit Synchronization Sources: E-NAC, EG1M-RM, EBPS6A, EBPS10A, E-FSA64, E-FSA250, E-FSC 3, 5, & 10 zone Strobe Lens Material: Polycarbonate