You are here: Home > Fire Alarms >

Voice Evacuation Panels for Fire Alarm Systems

We found 37 results matching your criteria.
An effective voice evacuation panel is critical component of your fire equipment. Security Store USA offers a selection of voice evacuation panels to enable you to offer rigorous fire protection, to operate in conjunction with your fire alarm control panel. Security Store USA carries voice evacuation panels that can be configured to accommodate virtually any type of facility, from a multiple-story building or an entire building complex that has a networked system in place.
Sort By:
Page of 4
Commercial Products Group EVAX504Z - Voice Evacuation Panel 50W 4-Zone Includes Power Supply / Battery Charger, Paging Microphone, Digital Message Repeater Evax Systems EVAX10016 Voice Evacuation Panel 100W 16 Speaker Zones, in a Large Cabinet
The EVAX 50 operates with any Fire Alarm Control Panel (FACP), and provides 50 Watts of speaker power. It includes all necessary features to provide an effective voice evacuation system. With the addition of zone splitters, remote microphone panels and expander modules, the EVAX 50 can be custom configured to satisfy the needs of most applications.

A digital message repeater (DMR) is built into the EVAX 50. The selection of alarm tone and automatic message repeats, as well as the 6 Hour delay of the AC power failure reporting feature are all field configurable.

The paging microphone is an integral component. Removal of the microphone from the panel will cause a Trouble condition which will be reported locally, as well as through the FACP.

The EVAX 50 has its own power supply and battery charge. Panel must be wired with 120 VAC and standby batteries connected. It is housed in an attractive surface or semi-flush mounted backbox, with a hinged and key-locked door.

  • Clean Dead-front Construction
  • Digitally Recorded Automatic Evacuation Message
  • (Up to 4 Minutes of Message Capacity)
  • 50 Watt Bullet-Proof Amplifier
  • 25 or 70 VRMS Field Selectable
  • 120 VAC Power Supply and Battery Charger
  • Live Microphone Override of Message and Tone
  • Analog Addressable Compatible
  • High Reliability, No Maintenance,
  • Fully Supervised
  • Easy Installation and Operation
  • Natural Sound Recordings
  • Built in Alarm and Alert Signals
  • Up to 4 Minute Message Capacity
  • Works with 12VDC or 24VDC Fire Alarm Panels
  • Works with Analog/Addressable and
  • Microprocessor based Fire Alarm Panels.
  • 3 Minute Message Restart on Microphone Key
  • 24 Hour Backup with two 12V 7AHr Batteries
  • The EVAX 100 operates with any Fire Alarm Control Panel (FACP), and provides 100 Watts of speaker power. It includes all necessary features to provide an effective voice evacuation system. With the addition of zone splitters, remote microphone panels and expander modules, the EVAX 100 can be custom configured to satisfy the needs of most applications.

    A digital message repeater (DMR) is built into the EVAX 100. The selection of alarm tone and automatic message repeats, as well as the 6 Hour delay of the AC power failure reporting feature are all field configurable.

    The paging microphone is an integral component. Removal of the microphone from the panel will cause a Trouble condition which will be reported locally, as well as through the FACP.

    The EVAX 100 has its own power supply and battery charge. Panel must be wired with 120 VAC and standby batteries connected. It is housed in an attractive surface or semi-flush mounted backbox, with a hinged and key-locked door.

  • Clean Dead-front Construction
  • Digitally Recorded Automatic Evacuation Message
  • (Up to 4 Minutes of Message Capacity)
  • 100 Watt High Efficiency Digital Amplifier
  • 25 or 70 VRMS Field Selectable
  • 120 VAC Power Supply and Battery Charger
  • Live Microphone Override of Message and Tone
  • Analog Addressable Compatible
  • High Reliability, No Maintenance,
  • Fully Supervised
  • Easy Installation and Operation
  • Natural Sound Recordings
  • Built in Alarm and Alert Signals
  • Up to 4 Minute Message Capacity
  • Works with 12VDC or 24VDC Fire Alarm Panels
  • Works with Analog/Addressable and
  • Microprocessor based Fire Alarm Panels.
  • 3 Minute Message Restart on Microphone Key
  • 24 Hour Backup with two 12V 7AHr Batteries
  • Evax Systems EVAX1004Z Voice Evacuation Panel 100W w/ 4 Speaker Zones Evax Systems EVAX1008Z Voice Evacuation Panel 100W w/ 8 Speaker Zones
    The EVAX 100 operates with any Fire Alarm Control Panel (FACP), and provides 100 Watts of speaker power. It includes all necessary features to provide an effective voice evacuation system. With the addition of zone splitters, remote microphone panels and expander modules, the EVAX 100 can be custom configured to satisfy the needs of most applications.

    A digital message repeater (DMR) is built into the EVAX 100. The selection of alarm tone and automatic message repeats, as well as the 6 Hour delay of the AC power failure reporting feature are all field configurable.

    The paging microphone is an integral component. Removal of the microphone from the panel will cause a Trouble condition which will be reported locally, as well as through the FACP.

    The EVAX 100 has its own power supply and battery charge. Panel must be wired with 120 VAC and standby batteries connected. It is housed in an attractive surface or semi-flush mounted backbox, with a hinged and key-locked door.

  • Clean Dead-front Construction
  • Digitally Recorded Automatic Evacuation Message
  • (Up to 4 Minutes of Message Capacity)
  • 100 Watt High Efficiency Digital Amplifier
  • 25 or 70 VRMS Field Selectable
  • 120 VAC Power Supply and Battery Charger
  • Live Microphone Override of Message and Tone
  • Analog Addressable Compatible
  • High Reliability, No Maintenance,
  • Fully Supervised
  • Easy Installation and Operation
  • Natural Sound Recordings
  • Built in Alarm and Alert Signals
  • Up to 4 Minute Message Capacity
  • Works with 12VDC or 24VDC Fire Alarm Panels
  • Works with Analog/Addressable and
  • Microprocessor based Fire Alarm Panels.
  • 3 Minute Message Restart on Microphone Key
  • 24 Hour Backup with two 12V 7AHr Batteries
  • The EVAX 100 operates with any Fire Alarm Control Panel (FACP), and provides 100 Watts of speaker power. It includes all necessary features to provide an effective voice evacuation system. With the addition of zone splitters, remote microphone panels and expander modules, the EVAX 100 can be custom configured to satisfy the needs of most applications.

    A digital message repeater (DMR) is built into the EVAX 100. The selection of alarm tone and automatic message repeats, as well as the 6 Hour delay of the AC power failure reporting feature are all field configurable.

    The paging microphone is an integral component. Removal of the microphone from the panel will cause a Trouble condition which will be reported locally, as well as through the FACP.

    The EVAX 100 has its own power supply and battery charge. Panel must be wired with 120 VAC and standby batteries connected. It is housed in an attractive surface or semi-flush mounted backbox, with a hinged and key-locked door.

  • Clean Dead-front Construction
  • Digitally Recorded Automatic Evacuation Message
  • (Up to 4 Minutes of Message Capacity)
  • 100 Watt High Efficiency Digital Amplifier
  • 25 or 70 VRMS Field Selectable
  • 120 VAC Power Supply and Battery Charger
  • Live Microphone Override of Message and Tone
  • Analog Addressable Compatible
  • High Reliability, No Maintenance,
  • Fully Supervised
  • Easy Installation and Operation
  • Natural Sound Recordings
  • Built in Alarm and Alert Signals
  • Up to 4 Minute Message Capacity
  • Works with 12VDC or 24VDC Fire Alarm Panels
  • Works with Analog/Addressable and
  • Microprocessor based Fire Alarm Panels.
  • 3 Minute Message Restart on Microphone Key
  • 24 Hour Backup with two 12V 7AHr Batteries
  • Evax Systems EVAX100E Voice Evacuation Expander Panel 100W Evax Systems EVAX15012  Voice Evacuation Panel 150W 12-Zone Includes:  2 Speaker Circuits: 1 - 100W, 1 - 50W, Power Supply / Battery Charger, Paging Microphone, Digital Message Repeater
    The EVAX 100 operates with any Fire Alarm Control Panel (FACP), and provides 100 Watts of speaker power. It includes all necessary features to provide an effective voice evacuation system. With the addition of zone splitters, remote microphone panels and expander modules, the EVAX 100 can be custom configured to satisfy the needs of most applications.

    A digital message repeater (DMR) is built into the EVAX 100. The selection of alarm tone and automatic message repeats, as well as the 6 Hour delay of the AC power failure reporting feature are all field configurable.

    The paging microphone is an integral component. Removal of the microphone from the panel will cause a Trouble condition which will be reported locally, as well as through the FACP.

    The EVAX 100 has its own power supply and battery charge. Panel must be wired with 120 VAC and standby batteries connected. It is housed in an attractive surface or semi-flush mounted backbox, with a hinged and key-locked door.

  • Clean Dead-front Construction
  • Digitally Recorded Automatic Evacuation Message
  • (Up to 4 Minutes of Message Capacity)
  • 100 Watt High Efficiency Digital Amplifier
  • 25 or 70 VRMS Field Selectable
  • 120 VAC Power Supply and Battery Charger
  • Live Microphone Override of Message and Tone
  • Analog Addressable Compatible
  • High Reliability, No Maintenance,
  • Fully Supervised
  • Easy Installation and Operation
  • Natural Sound Recordings
  • Built in Alarm and Alert Signals
  • Up to 4 Minute Message Capacity
  • Works with 12VDC or 24VDC Fire Alarm Panels
  • Works with Analog/Addressable and
  • Microprocessor based Fire Alarm Panels.
  • 3 Minute Message Restart on Microphone Key
  • 24 Hour Backup with two 12V 7AHr Batteries
  • The EVAX 200 / EVAX 150 panels provide 200W and 150W of speaker power respectively. Speaker zones can be configured for general alarm or alarm by zone operation as required.

    Digital message repeater, microphone, 120 VAC power supply and battery charger are all built in. The EVAX panels are an attractive or semi-flush mounted back boxes, with a surface-hinged and key locked door. Cabinet dimensions are: 14.5 x 27 x 4 whd

  • Clean Dead-front Construction
  • Digitally Recorded Automatic Evacuation Message (Up to 4 Minutes of Message Capacity)
  • 50/100 Watt Bullet-Proof Amplifier
  • 25 or 70 VRMS Field Selectable
  • 120 VAC Power Supply and Battery Charger
  • Live Microphone Override of Message and Tone
  • Analog Addressable Compatible
  • High Reliability, No Maintenance,
  • Fully Supervised
  • Easy Installation and Operation
  • Natural Sound Recordings
  • Built in Alarm and Alert Signals
  • Up to 4 Minute Message Capacity
  • Works with 12VDC or 24VDC Fire Alarm Panels
  • Works with Analog/Addressable and
  • Microprocessor based Fire Alarm Panels.
  • 3 Minute Message Restart on Microphone Key
  • 24 Hour Backup with two 12V 7AHr Batteries
  • Evax Systems EVAX1508Z  Voice Evacuation Panel 150W 8-Zone Includes:  2 Speaker Circuits: 1 - 100W, 1 - 50W, Power Supply / Battery Charger, Paging Microphone, Digital Message Repeater Evax Systems EVAX200 Voice Evacuation Panel 200W Includes:  2 Speaker Circuits 100W, Power Supply / Battery Charger, Paging Microphone, Digital Message Repeater
    The EVAX 200 / EVAX 150 panels provide 200W and 150W of speaker power respectively. Speaker zones can be configured for general alarm or alarm by zone operation as required.

    Digital message repeater, microphone, 120 VAC power supply and battery charger are all built in. The EVAX panels are an attractive or semi-flush mounted back boxes, with a surface-hinged and key locked door. Cabinet dimensions are: 14.5 x 27 x 4 whd

  • Clean Dead-front Construction
  • Digitally Recorded Automatic Evacuation Message (Up to 4 Minutes of Message Capacity)
  • 50/100 Watt Bullet-Proof Amplifier
  • 25 or 70 VRMS Field Selectable
  • 120 VAC Power Supply and Battery Charger
  • Live Microphone Override of Message and Tone
  • Analog Addressable Compatible
  • High Reliability, No Maintenance,
  • Fully Supervised
  • Easy Installation and Operation
  • Natural Sound Recordings
  • Built in Alarm and Alert Signals
  • Up to 4 Minute Message Capacity
  • Works with 12VDC or 24VDC Fire Alarm Panels
  • Works with Analog/Addressable and
  • Microprocessor based Fire Alarm Panels.
  • 3 Minute Message Restart on Microphone Key
  • 24 Hour Backup with two 12V 7AHr Batteries
  • The EVAX 200 / EVAX 150 panels provide 200W and 150W of speaker power respectively. Speaker zones can be configured for general alarm or alarm by zone operation as required.

    Digital message repeater, microphone, 120 VAC power supply and battery charger are all built in. The EVAX panels are an attractive or semi-flush mounted back boxes, with a surface-hinged and key locked door. Cabinet dimensions are: 14.5 x 27 x 4 whd

  • Clean Dead-front Construction
  • Digitally Recorded Automatic Evacuation Message (Up to 4 Minutes of Message Capacity)
  • 50/100 Watt Bullet-Proof Amplifier
  • 25 or 70 VRMS Field Selectable
  • 120 VAC Power Supply and Battery Charger
  • Live Microphone Override of Message and Tone
  • Analog Addressable Compatible
  • High Reliability, No Maintenance,
  • Fully Supervised
  • Easy Installation and Operation
  • Natural Sound Recordings
  • Built in Alarm and Alert Signals
  • Up to 4 Minute Message Capacity
  • Works with 12VDC or 24VDC Fire Alarm Panels
  • Works with Analog/Addressable and
  • Microprocessor based Fire Alarm Panels.
  • 3 Minute Message Restart on Microphone Key
  • 24 Hour Backup with two 12V 7AHr Batteries
  • Evax Systems EVAX20012 Voice Evacuation Panel 200W 12-Zone Includes:  2 Speaker Circuits 100W, Power Supply / Battery Charger, Paging Microphone, Digital Message Repeater Evax Systems EVAX20016 Voice Evacuation Panel 200W 16-Zone Includes:  2 Speaker Circuits 100W, Power Supply / Battery Charger, Paging Microphone, Digital Message Repeater
    The EVAX 200 / EVAX 150 panels provide 200W and 150W of speaker power respectively. Speaker zones can be configured for general alarm or alarm by zone operation as required.

    Digital message repeater, microphone, 120 VAC power supply and battery charger are all built in. The EVAX panels are an attractive or semi-flush mounted back boxes, with a surface-hinged and key locked door. Cabinet dimensions are: 14.5 x 27 x 4 whd

  • Clean Dead-front Construction
  • Digitally Recorded Automatic Evacuation Message (Up to 4 Minutes of Message Capacity)
  • 50/100 Watt Bullet-Proof Amplifier
  • 25 or 70 VRMS Field Selectable
  • 120 VAC Power Supply and Battery Charger
  • Live Microphone Override of Message and Tone
  • Analog Addressable Compatible
  • High Reliability, No Maintenance,
  • Fully Supervised
  • Easy Installation and Operation
  • Natural Sound Recordings
  • Built in Alarm and Alert Signals
  • Up to 4 Minute Message Capacity
  • Works with 12VDC or 24VDC Fire Alarm Panels
  • Works with Analog/Addressable and
  • Microprocessor based Fire Alarm Panels.
  • 3 Minute Message Restart on Microphone Key
  • 24 Hour Backup with two 12V 7AHr Batteries
  • The EVAX 200 / EVAX 150 panels provide 200W and 150W of speaker power respectively. Speaker zones can be configured for general alarm or alarm by zone operation as required.

    Digital message repeater, microphone, 120 VAC power supply and battery charger are all built in. The EVAX panels are an attractive or semi-flush mounted back boxes, with a surface-hinged and key locked door. Cabinet dimensions are: 14.5 x 27 x 4 whd

  • Clean Dead-front Construction
  • Digitally Recorded Automatic Evacuation Message (Up to 4 Minutes of Message Capacity)
  • 50/100 Watt Bullet-Proof Amplifier
  • 25 or 70 VRMS Field Selectable
  • 120 VAC Power Supply and Battery Charger
  • Live Microphone Override of Message and Tone
  • Analog Addressable Compatible
  • High Reliability, No Maintenance,
  • Fully Supervised
  • Easy Installation and Operation
  • Natural Sound Recordings
  • Built in Alarm and Alert Signals
  • Up to 4 Minute Message Capacity
  • Works with 12VDC or 24VDC Fire Alarm Panels
  • Works with Analog/Addressable and
  • Microprocessor based Fire Alarm Panels.
  • 3 Minute Message Restart on Microphone Key
  • 24 Hour Backup with two 12V 7AHr Batteries
  • Evax Systems EVAX2008Z Voice Evacuation Panel 200W 8-Zone Includes:  2 Speaker Circuits 100W, Power Supply / Battery Charger, Paging Microphone, Digital Message Repeater Evax Systems EVAX200E Voice Evacuation Expander Panel 200W
    The EVAX 200 / EVAX 150 panels provide 200W and 150W of speaker power respectively. Speaker zones can be configured for general alarm or alarm by zone operation as required.

    Digital message repeater, microphone, 120 VAC power supply and battery charger are all built in. The EVAX panels are an attractive or semi-flush mounted back boxes, with a surface-hinged and key locked door. Cabinet dimensions are: 14.5 x 27 x 4 whd

  • Clean Dead-front Construction
  • Digitally Recorded Automatic Evacuation Message (Up to 4 Minutes of Message Capacity)
  • 50/100 Watt Bullet-Proof Amplifier
  • 25 or 70 VRMS Field Selectable
  • 120 VAC Power Supply and Battery Charger
  • Live Microphone Override of Message and Tone
  • Analog Addressable Compatible
  • High Reliability, No Maintenance,
  • Fully Supervised
  • Easy Installation and Operation
  • Natural Sound Recordings
  • Built in Alarm and Alert Signals
  • Up to 4 Minute Message Capacity
  • Works with 12VDC or 24VDC Fire Alarm Panels
  • Works with Analog/Addressable and
  • Microprocessor based Fire Alarm Panels.
  • 3 Minute Message Restart on Microphone Key
  • 24 Hour Backup with two 12V 7AHr Batteries
  • The EVAX 200 / EVAX 150 panels provide 200W and 150W of speaker power respectively. Speaker zones can be configured for general alarm or alarm by zone operation as required.

    Digital message repeater, microphone, 120 VAC power supply and battery charger are all built in. The EVAX panels are an attractive or semi-flush mounted back boxes, with a surface-hinged and key locked door. Cabinet dimensions are: 14.5 x 27 x 4 whd

  • Clean Dead-front Construction
  • Digitally Recorded Automatic Evacuation Message (Up to 4 Minutes of Message Capacity)
  • 50/100 Watt Bullet-Proof Amplifier
  • 25 or 70 VRMS Field Selectable
  • 120 VAC Power Supply and Battery Charger
  • Live Microphone Override of Message and Tone
  • Analog Addressable Compatible
  • High Reliability, No Maintenance,
  • Fully Supervised
  • Easy Installation and Operation
  • Natural Sound Recordings
  • Built in Alarm and Alert Signals
  • Up to 4 Minute Message Capacity
  • Works with 12VDC or 24VDC Fire Alarm Panels
  • Works with Analog/Addressable and
  • Microprocessor based Fire Alarm Panels.
  • 3 Minute Message Restart on Microphone Key
  • 24 Hour Backup with two 12V 7AHr Batteries
  •    
     
    Voice Evacuation Panels for Fire Alarm Systems
     
     

    Enter your email for a chance to WIN $100 Amex Gift Card.

    Please Enter Your Email Address

    *One entry per household please