HAI 55A00-3IV 2400W Dimmer Switch - (Ivory)
Custom orders usually ship in 1-2 weeks.
HAI 55A003IV (Ivory) 2400W Dimmer Switch (Standalone, Omni family or Lumina family home control systems)
The 2400 Watt UPBÃ‚â„¢ Dimmer Switch is used for controlling and dimming lighting loads up to 2400 Watts. It comes with connectors and instructions.
HAI sells wallplates for this switch. The white Wallplate is HAI Part Number 55A03-1, and the ivory Wallplate is HAI Part Number 55A03-2.
While this switch comes in a default mode of dimming it may be set to non-dimming.
Requires a neutral (white) connection wire.
If you are using an HAI home control system with your switch you must install a UPBÃ‚â„¢ PIM & cable (HAI Part Number 36A00-1).
If you are using the HAI Upstart Configuration software you must install an UPBÃ‚â„¢ PIM & cable (HAI Part Number 36A00-1) and a cable to connect your PIM to a computer (HAI Part Number 36A05-2).
HAI recommends that every HAI Lighting Control (HLC) installation include a Phase Coupler (HAI Part Number 39A00-1).
All HLC products are UL Listed and use Universal Powerline Bus (UPBÃ‚â„¢) Ã‚â€“ a digital communications standard for lighting and home control that ensures superior reliability. UPBÃ‚â„¢ has been extensively tested and researched in residential environments and found to be 99.9 percent reliable. UPBÃ‚â„¢ works over existing wires in a home and does not require new wiring.
The HAI UPBÃ‚â„¢ 2400W Switch is capable of storing up to 16 preset light levels to create powerful lighting scenes. It is capable of being set to a non-dimming mode (see Configuration Software below) in order to control loads, such as fluorescent lights, that do not belong on a dimming switch.
The 2400 Watt UPBÃ‚â„¢ Dimmer Switch works as a standalone switch or may be used with other HAI Products, including Scene Switches, House Status Switches, and Home Control Systems to provide sophisticated lighting control.
The 2400W switch comes with equipped with a multi-color LED indicator, which may be set to off, blue, red, or magenta. The default settings are as follows:
Switch is off - LED is blue
Switch is on - LED is off
You may change these default colors by using the HAI UPBÃ‚â„¢ UPStart configuration software (see below).
The switch paddle is not removable for the 2400W switch; accordingly, you must order your desired color. It is available in White (WH) or Ivory (IV) colors.
No Wallplate is included when you purchase this switch; however, you may purchase a Wallplate cover from HAI. The white Wallplate is HAI Part Number 55A03-1, and the ivory Wallplate is HAI Part Number 55A03-2.
When used with an HAI Home Control System HLC products automatically configure themselves, and outside software is not required. HAI offers HAI UPBÃ‚â„¢ UPStart Configuration software for professionals who desire to make advanced changes to our default setup.
HAI UPBÃ‚â„¢ UPStart configuration software will allow you to change the function of this dimming switch to be non-dimming or vice-versa. This software also allows you to change the colors on the switch's LED and the rate that it brightens to fully on or dims to fully off.