The HAI/Leviton Access Control Card/Key Fob Reader connects to a serial port on an HAI/Leviton Home Control System to limit system access. Each card/key is attached to a user code in the HAI/Leviton Omni or Lumina family controller. Each swipe can perform as many actions as desired and these results can be customized by time of day, arming condition, or any other event the HAI/Leviton home control system is monitoring. Because each card or key tag is tied to a specific user, all of the actions can be customized for each individual. To access the system, use either a standard credit card sized Access Control Card or the convenient Access Control Key tag. The reader incorporates an input for a push-to-exit button and an output for an electric door strike or magnetic lock. It can be mounted to a door frame (mullion) or to any flat wall surface. The two-color LEDs (green and red) and piezo sounder on the reader can be customized to provide individual feedback to the user. This 125 KHz high security, digitally encrypted, 26-Bit proximity card reader has durable and scratch resistant polycarbonate housing for long-term outdoor use. Full epoxy potting ensures successful operation even in harsh environments. NOTE: The reader requires an Ethernet-enabled HAI/Leviton controller that has firmware version 3.0 or higher. HAI Part Number: 75A00-2.