Pelco PEL-ESTI6505W SXTI Pan Tilt 640 X 480 50mm IP NTSC HV Wall Mount
Custom orders usually ship in 1-2 weeks.
The Sarix TI Series Thermal IP Positioning System is an advanced thermal imaging pan/tilt system designed for easy integration into any new or existing video security application. The system is designed to provide detection, recognition, and identi?cation of people and vehicles in any lighting condition, including complete darkness. Every Sarix TI Series features IP or analog outputs in the same package and an integrated environmentally protected IP66 rated enclosure with Esprit pan/tilt positioner, which can be controlled using IP or analog systems that use Coaxitron or RS-422 Pelco D and Pelco P protocols. Additionally, when used in an IP system, the Sarix TI Series features a full suite of designed-for-thermal analytics. At the core of the Sarix TI Series is an uncooled, sun-safe microbolometer, long-wavelength infrared (LWIR) camera that delivers up to 640 x 480 thermal video. These cameras feature an amorphous silicon detector, which has lower ?xed pattern noise and a more uniform response than vanadium oxide detectors, while still maintaining high resolution and sensitivity when exposed directly to the sun during normal daylight hours. The Sarix TI Series provides outstanding sensitivity below 50 mK at f/1.0. It is capable of multiple display formats, including white hot, black hot, and color signatures. The Sarix TI Series is available with multiple lens con?gurations for effective deployment in a wide range of applications. The Sarix TI Series is available in 640 x 480 and 384 x 288 resolution options. The camera has an input voltage of 24 VAC or a selectable power source of 120/230 VAC. In IP installations, the Sarix TI Series can support two simultaneous video streams. The two streams can be compressed in MJPEG and H.264 formats across several resolution con?gurations. The streams can be con?gured to a variety of frame rates, bit rates, and group of pictures (GOP) structures for additional bandwidth administration. When used in analog installations, the Sarix TI Series supports camera control and limited camera setup using Coaxitron , Pelco P, and Pelco D protocols. The Sarix TI Series provides variable pan and tilt speeds ranging from 0.1 to 40 degrees per second in manual pan mode and 0.1 to 20 degrees per second in manual tilt mode. Pan preset and turbo speeds are 100 degrees per second in wind speeds of 50 mph and 50 degrees per second in the 90 mph wind-speed pro?le. Tilt preset speed is 30 degrees per second. The Sarix TI Series is capable of 360 degrees of continuous pan rotation. The tilt range allows for horizontal viewing of +33 to -83 degrees. Preset positions have a preset accuracy of one-quarter degree. The powder-coated aluminum enclosure makes the Sarix TI Series ideal for either indoor or outdoor applications. The system has a sustained operating temperature range of - 40Ã‚Â° to 50Ã‚Â°C (-40Ã‚Â° to 122Ã‚Â°F). A built-in heater/defroster and sun shroud are standard features on the Sarix TI Series. Specifications: Video: IP/Network: Video Encoding: H.264 High, Main, or Base pro?les and MJPEG Video Streams: Up to 2 simultaneous streams; the second stream is variable based on the setup of the primary stream Frame Rate: Up to 30, 25, 24, 15, 12.5, 12, 10, 8, 7.5, 6, 5, 4, 3, 2.5, 2, 1 (dependent upon stream con?guration) Available Resolution for 384 x 288: Resolution: Width: 640,320 Height: 480, 240 Aspect Ratio: 4:3, 4:3 MJPEG: Maximum IPS: 30, 30 Recommended Bit Rate (Mbps): 4.79, 1.17 H.264 High Pro?le: Maximum IPS: 30, 30 Recommended Bit Rate (Mbps): 1.41, 0.49 Supported Protocols: TCP/IP, UDP/IP (Unicast, Multicast IGMP), UPnP, DNS, DHCP, RTP, RTSP, NTP, IPv4, SNMP, QoS, HTTP, HTTPS, LDAP (client), SSH, SSL, SMTP, FTP, and 802.1x (EAP) Users: Unicast: Up to 20 simultaneous users depending on resolution settings (2 guaranteed streams) Multicast: Unlimited users H.264 Security Access: Password protected Software Interface: Web browser view and setup Pelco System Integration: Endura 2.0 (or later) Digital Sentry 4.2 (or later) Analog: Video/Coaxitron Port: 75 ohms, unbalanced Video Modes: NTSC Video Level: 1 Vp-p Electrical: Ethernet Port: Inline RJ-45 for 100Base-TX, auto MDI/MDI-X Ethernet Cabling Required: Cat5 or better for 100Base-TX Input Power: 24/120/230 VAC, 50/60 Hz, switch selectable for 120/230 VAC Input Power Range: +15%/-20% Power Consumption: Lens: 50 mm Power: 0.41 A, 109.4 VA (105 W) 120/230 VAC Fuse: 2 A, slow-blow Heater: Thermostat controlled Local Storage: Micro SD Alarm Inputs: N.O. switch, N.C. switch, or 1 kohm; supervised Mechanical Relay Output: Voltage: 60 VDC, 125 VAC Current: 1 A Power: 62.5 VA, 30 W Solid-State Relay Output: Voltage: 60 V Current: 600 mA Audio: Input: UTP 600 ohm mono, 12 VDC power source, line level/external microphone input, 1 Vp-p maximum signal level Compression: G.711 PCM, 64 kbps Serial Control Port: 4-wire, RS-422/RS-485 (Pelco D or Pelco P) Serial Control Cabling Type: UTP Mechanical: Pan Movement: 360Ã‚Â° continuous pan rotation Vertical Tilt: 33Ã‚Â° to -79Ã‚Â° unobstructed from horizontal Variable Pan/Tilt Speed: Pan: Analog Control: 0.5Ã‚Â° to 40Ã‚Â°/sec, 100Ã‚Â°/sec turbo IP Control: 0.1Ã‚Â° to 100Ã‚Â°/sec Tilt: Analog Control: 0.5Ã‚Â° to 20Ã‚Â°/sec IP Control: 0.1Ã‚Â° to 30Ã‚Â°/sec Preset Speeds: Pan: 100Ã‚Â° per second Tilt: 30Ã‚Â° per second Latching: 2 captive Torx screws General: Construction: Aluminum Finish: Gray polyester powder coat Environment: Indoor/outdoor Operating Temperature: -40Ã‚Â° to 50Ã‚Â°C (-40Ã‚Â° to 122Ã‚Â°F) Storage Temperature: -40Ã‚Â° to 60Ã‚Â°C (-40Ã‚Â° to 140Ã‚Â°F) Weight: Unit: 11.3 kg (24.9 lb) Shipping: 15 kg (33 lb)