Pelco PEL-IX30DN6EN Sarix Imagepak Environmental Pendant Clear 3.1 Megapixel Day/Night Camera
Custom orders usually ship in 1-2 weeks.
The IX30 Series with Sarix technology is a 3.1 megapixel (MPx) network camera designed with industry-leading image quality and high performance processing power. Designed to install quickly, the camera comes equipped with the advanced features needed for demanding security applications. Sarix technology defines the next generation of video security imaging performance, delivering high definition (HD) resolution, advanced low light capabilities, consistent color science, and fast processing power. The H.264 compression video files are up to 20 times smaller making high definition video more affordable. The IX30 Series has two 3.1 megapixel models: color and day/night. Both models feature advanced low light technology capabilities. The day/night model has a mechanical IR cut filter for increased sensitivity in low light installations. The IX30 Series can support two simultaneous video streams. The two streams can be compressed in MJPEG and H.264 formats across several resolution configurations. The streams can be configured to a variety of frame rates, bit rates, and GOP (group of pictures) structures for additional bandwidth administration. The IX30 Series is simple to install, and the automatic back focus control feature makes sharp scene focus setup easy. A convenient video setup jack eliminates the need to use a laptop for viewing video when installing the camera. The IX30 Series features built-in Power over Ethernet (PoE) IEEE 802.3af, which supplies power to the camera over the network, eliminating the need for a separate power supply. If PoE is not available, 24 VAC can be used to power the camera. The IX30 Series uses a standard Web browser for powerful remote setup and administration. Up to 16 cameras can be viewed on the same network. Network protocols such as SSL configuration for security certificates, SSH for remote logon, and QoS for priority or guarantee data flow can be managed using a Web browser. Specifications: General: Imaging Device: 1/3-inch (effective) Imager Type: CMOS Imager Readout: Progressive scan Maximum Resolution: 2048 x 1536 Signal-to-Noise Ratio: 50 dB Auto Iris Lens Type: DC drive Electronic Shutter Range: 1 ~ 1/100,000 sec Wide Dynamic Range: 60 dB White Balance Range: 2,000Ã‚Â° to 10,000Ã‚Â°K Sensitivity: f/1.2; 2,850Ã‚Â°K; SNR >24 dB Color (33 ms): 0.50 lux Color SENS (500 ms): 0.12 lux Mono (33 ms): 0.25 lux Mono SENS (500 ms): 0.03 lux Weight (without lens): 1.11 lb (0.50 kg) Shipping Weight: 2.00 lb (0.90 kg) Electrical: Port: RJ-45 connector for 100Base-TX Auto: MDI/MDI-X Cabling Type: Cat5 or better for 100Base-TX Power Input: 22 to 34 VAC; 24 VAC nominal or PoE (IEEE 802.3af class 3) Power Consumption: <6 W Current Consumption: PoE: <200 mA maximum 24 VAC: <295 mA nominal; <390 mA maximum Local Storage: Mini SD Alarm Input: 10 VDC maximum, 5 mA maximum Alarm Output: 0 to 15 VDC maximum, 75 mA maximum Service Port: External 3-connector, 2.5 mm provides NTSC/PAL video output Mechanical: Lens Mount: CS mount, adjustable Camera Mount 0.25-inch (0.64 cm) UNC-20 screw, top and bottom of camera housing Enviromental: Operational Temperature: 14Ã‚Â° to 122Ã‚Â°F (-10Ã‚Â° to 50Ã‚Â°C) Storage Temperature: 14Ã‚Â° to 158Ã‚Â°F (-10Ã‚Â° to 70Ã‚Â°C) Storage Humidity: 20% to 90%, noncondensing Vidio: Video Encoding: H.264 base profile and MJPEG Video Streams: Up to 2 simultaneous streams; the second stream is variable based on the setup of the primary stream Frame Rate Up to 30, 25, 24, 15, 12.5, 12, 10, 8, 7. 5, 6, 5, 4, 3, 2.5, 2, 1 (dependent upon coding, resolution, and stream configuration) Additional Resolutions: 640 x 512, 640 x 352, 480 x 368, 480 x 272, 320 x 256, and 320 x 176 Supported Protocols: TCP/IP, UDP/IP (Unicast, Multicast IGMP), UPnP, DNS, DHCP, RTP, RTSP, NTP, IPv4, SNMP v2c/v3, QoS, HTTP, HTTPS, LDAP (client), SSH, SSL, SMTP, FTP, mDNS (Bonjour), and 802.1x (EAP) Certifications: CE, Class B FCC, Class B UL/cUL Listed C-Tick