Pelco PEL-SD4N23PB1 Spectra IV IP SL 23X Pendant Black Clear NTSC
Custom orders usually ship in 1-2 weeks.
The Pelco Spectra IV SL SD4N23-PB-1 Network Dome System includes a pendant standard black back box, a chrome lower dome, and a DD423 Day/Night camera. The system is used to control and monitor video over IP networks as well as allows you to view and control analog video while viewing, recording, and controlling network IP video. Built-in 100Base-TX network interface enables live streaming to any network application. Open architecture connectivity for third-party software recording solutions allows integration into any IP-based system. The system is compatible with Digital Sentry video management systems and when connected to an Endura network-based video security system, the dome system can access EnduraStor and EnduraView for optimized image quality and bandwidth efficiency. The pendant standard back box is made of aluminum and has a built-in memory for storing camera/dome settings. It also features a quick disconnect system, which makes drive installation or replacement quick and easy. The acrylic constructed lower dome, specially designed for optimal relation with the lens, causes f/2.0 lightloss and facilitates clear videos even at long focal lengths. With a 1/4" EXview HAD image sensor, the DD423 Day/Night camera offers clear images at a resolution of 540TVL. The camera has a varifocal lens with a focal length of 3.6-82.8mm at f/1.6 and offers a 23x optical zoom and 12x digital zoom. With 64 presets, the camera offers Ã‚Â±0.1Ã‚Â° preset accuracy. On-screen compass, tilt, and zoom display feature helps in determining positions and window blanking allows up to 4 user-defined 4-sided privacy areas to be set by the user. Eight programmable zones can be labeled with a maximum of 20 characters each or set to output blank video. The proportional pan/tilt feature decreases pan/tilt speeds in proportion to the depth of zoom and the camera's variable scan speed ranges from 1-40Ã‚Â°/sec. It also has a 'freeze frame between presets' facility that ensures a seamless frame transition between presets. Password-protection ensures that settings cannot be tampered by unauthorized persons. The auto-focus feature automatically focuses the camera on to the selected object or area. Auto white balance takes a standard white color reference to adjust the RGB (red, green, and blue) colors to produce good quality images in a wide range of lighting conditions. Automatic iris control adjusts the amount of light passing through the lens. AC line lock is used to eliminate timing discrepancies in H/V sync that cause picture interruptions at the switching point. Specifications: Camera: Signal System: NTSC Image Sensor: 1/4" Color EXview HAD CCD Number of Pixels: 768 x 494 Resolution: 540 TV Lines Lens: Focal Length: 3.6-82.8mm. f/1.6 Zoom: 23x Optical, 12x digital Zoom Speeds: 2.9/4.2/5.8 seconds Focus: Auto with manual override Angle of View: 54Ã‚Â° at 3.6mm wide zoom/2.5Ã‚Â° at 82.8mm telephoto zoom Iris Operation: Automatic with manual override Minimum Illumination: 0.65 lux at 1/60 sec (color) 0.15 lux at 1/60 sec (B-W) Signal-to-Noise Ratio: >50dB Pan Angle: 360Ã‚Â° continuous pan rotation Pan Speed: 0.1Ã‚Â° to 80Ã‚Â°/sec manual operation, 150Ã‚Â°/sec Turbo Preset Speed: 400Ã‚Â°/sec Tilt Angle: Unobstructed +2Ã‚Â° to -92Ã‚Â° Tilt Speed: 0.1Ã‚Â° to 40Ã‚Â°/sec manual operation Preset Speed: 200Ã‚Â°/sec Preset Positions: 64 (Ã‚Â±0.1Ã‚Â° Preset Accuracy) Controls: Day/Night Electronic Shutter 1/2-1/30,000 (manual/automatic) White Balance (automatic with manual override) Gain (automatic/off) Wide Dynamic Range (integrated) Video Output: BNC or UTP Audio Input: x1 (terminal block) Audio Output: x1 (terminal block) Motion Detection: No Sync System: Internal/AC line lock, phase adjustable using remote control, V-Sync Communication Port: Coaxitron, RS-422, RJ-45 (for software update and setup) Communication Protocol: Autosensing protocol (Coaxitron, RS-422 Pelco P and Pelco D, Sensormatic, Vicon); accepts other control protocols with optional translator card Alarm I/O: 1 alarm input, 1 relay output Network: Interface: RJ-45 connector for 100Base-TX Auto MDI/MDI-X Autonegotiate/Manual setting Compression: MJPEG, MPEG-4 (available only with Microsoft Internet Explorer) Video Streaming: 3, simultaneous Resolution: 4CIF: 704 x 480 2CIF: 704 x 240 CIF: 352 x 240 QCIF: 176 x 120 Bit Rate: MPEG-4: 30 ips, 2 Mbps for primary stream, 1 Mbps for secondary stream; implements EnduraView MJPEG: 15 ips, 3 Mbps, MJPEG Web User Interface: Pelco Device Utility interface for viewing HTTP, requires Java Runtime Environment (JRE) Simultaneous Client Access: 5 simultaneous users MJPEG and/or MPEG-4 unicast; unlimited number of users using multicast (MPEG-4 only) Minimum System Requirements: Processor: Intel Pentium 4 microprocessor, 1.6 GHz Operating System: Windows 98, Windows 2000, Windows XP (or later), or Mac OS X 10.3.9 (or later) Memory: 512 MB RAM Network Interface Card: 100 megabits Web Browser: Internet Explorer 5.5 (or later); Mozilla Firefox 1.5 (or later) Monitor: Minimum of 1024 x 768 resolution, 16- or 32-bit pixel color resolution Firmware Upgrade: Pelco Device Utility or Endura Application Supported Protocols: TCP/IP, UDP/IP (unicast, multicast IGMP), UPnP, DNS, DHCP, RTP, NTP Enclosure: Construction: Back Box: aluminum Camera: aluminum, thermoplastic Bubble: acrylic Cable Entry: Through 1.5" NPT pendant mount Power Requirements: 24VAC or 24VDC Power Consumption: AC: 23 VA nominal (without heater) / 73 VA nominal (with heater) DC: 0.7 A nominal (without heater) / 3 A nominal (with heater) Operating Temperature: Maximum: 113Ã‚Â°F (45Ã‚Â°C) absolute maximum; 95Ã‚Â°F (35Ã‚Â°C) sustained maximum Minimum: 25Ã‚Â°F (-4Ã‚Â°C) sustained minimum Dimensions (WxH): 8.6 x 10.6" (21.8 x 26.9cm) Weight: 6.5 lbs (3kg)